Ubuntu Networking :: Cannot Make Work Airlink Golden 150 AWLL5077 In 9.10
Sep 30, 2010I recently purchased this wireless adapter and tried to make work with ndiswrapper but I had no success so far.
View 9 RepliesI recently purchased this wireless adapter and tried to make work with ndiswrapper but I had no success so far.
View 9 Repliesinstalling this wifi adapter to my laptop runing lubuntu. i got this adapter to work in ubuntu with a realteck natty driver but when i tried the same here it did not work.
how to make a home network with my 2 ubuntu pcs and my lubuntu laptop.
So I recently obtained a USB wifi card, an Airlink 101 USB device. When I attach it to my Ubuntu system it is recognized by the network manager and it can see my wifi network - however it is unable to connect. When I enter the passcode for my wifi it spins trying to connect and then spits it back to me telling me I need to reenter the password after a few moments - I am 100% sure the password is correct. I tried the device on two different Ubuntu systems (one 32bit and one 64bit) and achieved the same results on each.
I can confirm the wifi itself works as I am typing from my laptop connected to it as we speak...
I made a Ubuntu server and it is pretty cool. I had a windows computer that I could copy and paste files to and from over the network. What you did is just find it in My Network and the files were available there. How do I make Ubuntu or Samba act like that?
View 2 Replies View RelatedPlug Smart Bro ZTE MF627 usb modem (a message might appear saying GSM network not onnected, or something similar)2. Click the "network connection" icon3. Select �New Mobile Broadband GSM Connection� and Click "Forward"4. Select "Philippines" then click "Forward"
5. Select "Smart", click "Forward"6. Select "
I've downloaded all the drivers and have an ethernet connection working however as I have an INSPIRON 1545, the network card is shoddy for LInux and I can't get the wireless working AT ALL.
lshw -C network
*-network
description: Network controller
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
[code]...
I have a Sony VAIO VGN SR29VN with ubuntu 9.10; I am trying to make a wifi connection through WPA work, to no avail. WEP and open connections work correctly, but when I try to connect to a WPA network using TTLS via network manager, y get errors of this type:Current regulatory domain updated by AP to:ES
preceded by lots of "leaving channel xxxx intact" and followed by "disassociating by local choice".This Sony is using an Intel 5100 wifi; any idea of what's going on or how to fix it?
My wired network is not working! This is the result of ifconfig -a:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:25:3e:fe:50
inet6 addr: fe80::21c:25ff:fe3e:fe50/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
I installed UBUNTU 10.10 alongside windows 7. Now the problem is: If i boot into UBUNTU first, ethernet does not work. But it works if i boot windows first and restart back into UBUNTU. Which means i have to boot windows first to make ethernet work on UBUNTU every time i start my PC.
View 9 Replies View RelatedHow to make it work?
View 1 Replies View RelatedIn emule p2p filesharing there's this thing called the id that is low if you do not configure your router for certain ports to be listening for incoming connections, forwarded by the router to ports on your pc. When the id is low, your downloads take longer or something like that. But if you have no listening port, how can a peer download from you?
View 2 Replies View Relatedi installed the free PacketIX vpn client on my ubuntu 9.04. it created a virtual network adapter, i was able to configure and connect to the VPN service but when i add a default route to the routing table so that all internet traffic goes through the VPN, my internet connection stops working until i remove the line i added.
here's my routing table before :
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.222.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 vpn_vpn
0.0.0.0 192.168.222.2 0.0.0.0 UG 0 0 0 eth0
and after i add the route:
[Code].....
I have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.
View 2 Replies View RelatedI'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
I have 2 (some future machines will have 4) ethernet ports. I want to have them configured such that if any gets unplugged, as long as at least one of them is plugged in, it can reach the network (even if via a different IP address), and it can be reached (at least when trying a working IP address). I tried this for /etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[Code]...
I have a problem with new installed machine. i have installed RHEL5 2.6.18-92.el5xen kernel and configured 2 network cards.
DEVICE=eth0
BOOTPROTO=static
#HWADDR=xx:xx:xx:xx:xx:xx
ONBOOT=yes
NETWORK=192.168.6.0
NETMASK=255.255.255.0
[Code]...
I'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
dhcpd.conf file:
ddns-update-style interim
ignore client-updates
ubnet 10.160.195.160 netmask 255.255.255.224
[code]...
My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)
firmware: isl3887usb
firmware: isl3886usb
dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like
bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter
[code]....
When I start up, in boot messages I get something like this
WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]
My network is windows pppoe. How can I configure it for Fedora 11? Is there any graphical configuration tool available for that? Also, ubuntu 9.04 logs into pppoe network after restarting as I've made some changes in /etc/network/interfaces. Is there any option available for Fedora 11 to automatically log in to pppoe network after restarting?
View 4 Replies View RelatedI am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedI can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedWhen I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedI just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
I just installed Squeeze_di_rc1, whit gnome, when i insert any usb stick i recive how can i solve it?At the same times i tried to format in fat 16 with gparted but the result is the same.
View 6 Replies View RelatedMy mv920 Monitor just shakes and fuzzies ubuntu 10.04 and on my lcd it dosent. its a CTR.
View 2 Replies View RelatedIm trying to get a Bluetooth USB dongle work but I cant.
Bluetooth Preferences doesnt recognise it and bluetooth manager gives me this error "Bluez daemon is not running, blueman-manager cannot continue.". See attached captures.
I already tried many solutions proposed in other threads with no luck. I reinstalled their packages and it keeps the same.
I'm using 10.10 upgraded from 10.04. With 10.04 I had the same issue.
It seems that with ufw enabled It is impossible for upnp applications to negociate with the network router the ports they need to be opened. Is there any way to make ufw and upnp work together?
View 6 Replies View Related