Networking :: Turn On Wireless Adapter?
Mar 11, 2010Iwlist wlan0 power:
wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work
[code]...
Iwlist wlan0 power:
wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work
[code]...
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
switched from 4 years Ubuntu use due to Unity, and thus also new to this forum but I hope that you can help me, so I later on can give back to the community.My problem is that the Wireless in Network Manager refuse to go to "on", or to be more correct it goes to "on" for about a second and then back to "off". My computer which uses F15, a Lenovo B560 laptop, have a BCM4313 and the apparent reason is that after that I installed the broadcom-wl and run "su -c 'modprobe wl'" so did I get the response "FATAL: Driver not found". However, the earlier non-existing wireless button in the network manager appeard after the installation, id est the broadcom-wl must have been in plase.
View 2 Replies View RelatedOk, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
I installed Kubuntu 10.04 on my laptop (HP Pavilion dv5-1010) and the networking was working fine for the most part, but then not sure what happened, the screen just kinda went blank so I restarted the laptop, and now the wireless won't turn on. There's a button on the laptop to turn it on and off, but I can't seem to get that to function in Linux. I'm assuming it's just a simple matter of getting the wireless to switch back on again, unfortunately I can't figure out how to do that .
Edit: I've tried to whole booting into windows and turning the wireless on there, and before that's worked, but it doesn't seem to be working this time around.
Ubuntu 10.4 LTS as a Live CD (intend to dual boot later, testing for now.) Laptop : Acer Aspire 5251-1513 Wireless card: Atheros AR928X PCI-Express
To turn this on in Windows, I have to do Fn F3. But it does not work in Ubuntu. Most of the other Fn keys work, sound, screen, brightness. Found some relative info, but nothing that might be certain
Now, I know there are some issues with that Artheros card, but I think i need to first get it activated.
I am having issues trying to turn on my wireless card. I have tried to use the ifconfig command to do so, but it gave me an error.
Code:
@ubuntu-laptop:~$ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
This is what I get when I type iwconfig
[Code].....
I have an HP Compaq 6735s with a Broadcom 802.11 a/b/g draft-n wireless card that I've been running 9.10 (the karmic koala one I think it was called) on for the past 7 or 8 months (been running Ubuntu in general for the last couple years). The card won't turn on--the indicator light is always orange, not blue as it should be. I thought it might be a hardware problem so I took it to a shop, but they tested it several times and said the card was fine and that upgrading my software should solve the problem.
I just upgraded it to the 10.10 distro (usually a friend did my upgrades for me but alas that's no longer an option) but that has not fixed it. I thought to try and re-download the Broadcom drivers on a different computer, then transfer them to my laptop, but when I did that and tried to open the .exe file, a message popped up saying the file was no good. (Can you tell I'm not a computer pro yet? Haha) Any idea how I could fix this or what the problem might be? I'm really frustrated as it's been an issue for the last six months, plus this is my only computer and I need it to function fully for purposes of finding a job, etc. If I could I'd just buy a different computer at this point (really disappointed with HP laptops in general) but sadly that's not an option. I'm to the point where I'd consider running Windows again just to make the damn thing work.
I just installed the driver for my D-link DWA160 adapter, And now I cant seem to get it working.
View 6 Replies View RelatedI have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?
View 3 Replies View RelatedI have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
View 9 Replies View RelatedI've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.
View 1 Replies View RelatedI have Problem with connection Wireless.I can't install wireless adapter.Now i'm installed Backtrack3.How i can Configure wireless adapter.
View 2 Replies View RelatedAs I am struggling to get my Netgear WNP111 to work with ubuntu 8.10 ,can someone recommend an adapter that will work out of the box with ubuntu 8.10 .
View 7 Replies View RelatedI am a new user of ubuntu. I seem to have problem connecting to bluetooth. There is a message saying there are no bluetooth adapter. How do I turn on the adapter now that I've switched from windows 7 to ubuntu. My bluetooth was working fine in windows.
View 7 Replies View RelatedI accidentally clicked a secured wireless which I do not have password. Now every time I open Ubuntu, a window pops up asking for password for the wireless. I am wondering how to turn if off.
View 1 Replies View RelatedMy wifi was off when I upgraded to Windows 7 and can't turn it back on now. I red about aircraft-manager and installed Ubuntu 10.04 newbie, loving ubuntu already!).Installed aircraft-manager 12.1 but it doesn't open and when I shut down a messages informs me that aircraft-manager is not responding. So I thought it was Ubuntu 10.04 and made a Ubuntu 9.04 live USB. Same problem.I have a LG e200 notebook with ATI redeon graphics card and Atheros wireless adapter.
View 1 Replies View RelatedI have a HCL K21 PDC notebook . In windows there is an driver called wconsole.exe or wireless console which help me turn on and off both blutooth and wlan device but in ubuntu these devices are not turned off. I also tried to to use the device buttons but it get activated automatically (but not in windows).
View 4 Replies View RelatedMy wireless is stuck off, i put the command rfkill list and it says
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
[code]...
I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies View RelatedI have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
I am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
My netbook have an internal wireless receiver, but from my room it doesn't work well, so I bought a TP Link TL-WN422G hoping it receives better. Ubuntu sees it but I don't know how to force using it.. I attach lsusb with peripheral in bold:
View 3 Replies View RelatedUbuntu 10.04 does not recognize my wireless usb adapter at all. Its a linksys WUSB100 ver.2.
View 1 Replies View RelatedI've recently installed 10.04 LTS on an old laptop. I've not been able to connect to the internet at all. I finally finagled some drivers for my Broadcom BCM4318, and seemed to get everything in order, but it says that the "Radio hardware status changed to DISABLED"
Then, I pushed the button on the laptop to turn the wireless on, and it worked! But then as soon as I let the button go, it turned off. Is there some way to toggle it so it's always on?
I bought a USB adapter for my wireless connection at home. But there is no drivers for the adapters in ubuntu, there is only windows executable files. I am using ubuntu 10.04. I spend around 40$ for the adapter. Some one please help me how to work this out. Its NP910n netcomm adapter. I am using ubuntu10.04.
View 1 Replies View RelatedPreviously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies View Related