Ubuntu Networking :: Wired Network Active But Cant Connect Online?
Feb 20, 2010
Yesterday I moved my modem (wireless) to my living room so the PS3 detected a better signal. In doing so, I had to run a new ethernet cable from my living room where the modem is into my office where the computer is. I use ubuntu 9.10
For some reason I cannot connect to the internet now. When I scroll over the connection, it says wire connection 1 is active. I have my settings manually set. I did notice the MAC address field is blank...
I didn't have an issue before, but with changing cables and whatnot, something got messed up somehow.
View 1 Replies
ADVERTISEMENT
May 5, 2010
I have just installed Ubuntu 10.04 on an HP Pavilion dv6000 series laptop, dual-boot. Everything is working except the networking. It can see wireless networks, and when I type in the password for my wireless network, it tries to connect, then asks for the password again. When I plug in the Ethernet cable, again it tries to connect, but after a few seconds gives up and tells me I am now offline.
View 8 Replies
View Related
Jan 9, 2011
I just finished installing Ubuntu 10.10 64bit. During installation Ubuntu was connected to the network and was downloading updates. After rebooting though, it cannot connect to the network.
View 1 Replies
View Related
Mar 4, 2011
Just installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?
View 3 Replies
View Related
Nov 30, 2010
I am unable to connect to any network, wired or wireless. Network-manager and wicd are both gone, as in no longer installed. Please don't tell me to apt-get anything. I have no network connection. I have tried downloading packages for nm onto a usb stick only to find myself in dependency hell which ended with the impassible error "Requires installation of untrusted packages".
View 6 Replies
View Related
Apr 29, 2011
F14 did not recognize my wired or wireless NIC upon installation. I have enabled network manager, what should I do from here? Here is my hardware specifications:
Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
View 11 Replies
View Related
Feb 15, 2011
cannot connect to my window computer using open SuSe
I am attempting to connect to my Windows Computer via a wired network on a sky router. When I tried with PClinuxOS it configured automatically. With the latest version of open SuSe 13.1this is quite a bit different. I have got as far as the network being auto and active with an Icon showing on the taskbar. However when I click on the Windows network Icon SuSe tyies to locate my Computer but then comes back with " failed to reteive share list from server. This is as far as I can get after several hours of trying.
View 1 Replies
View Related
Jun 11, 2010
I just upgraded to Fedora 13 (from 10, using preupgrade), and I've gotten most things working again, but I'm still having trouble with the network.My wired connection (eth0) doesn't connect on boot (even though ONBOOT=yes in /usr/sysconfig/network-scripts/ifcfg-eth0).Because of that, I figured I'd just leave eth0 connected manually (with ifup eth0). However, I then found that if I try to connect to a VPN like this, the system reverts to the "stalling every time I try to connect to the internet" problem that I had earlier.
View 1 Replies
View Related
Jun 18, 2010
I can get my desktop to connect to network on the router its plugged into.
View 1 Replies
View Related
Nov 8, 2010
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
View 9 Replies
View Related
Nov 2, 2010
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies
View Related
Jan 10, 2011
in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies
View Related
Feb 11, 2010
I just installed ubuntu 8.10 on my pc. Before was XP installed. I formatted the system and installed ubuntu. Installation was successful. Problem is that I cant connect to network. My network card: realtek 8139 ethernet card
On ifconfig I get:
Code:
eth0 Link encap:Ethernet HWaddr 00:16:76:af:23:b3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:23 Base address:0xb800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:502 errors:0 dropped:0 overruns:0 frame:0
TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31896 (31.8 KB) TX bytes:31896 (31.8 KB)
Also the connection is wired one with modem only it's reliance broadband. The wire is connected between modem and pc but there is no blinking of light for this connection. The wan is active and wan's light is blinking and when I was on xp on same pc there was no such problem.
View 4 Replies
View Related
Feb 23, 2011
I have a new install of Ubuntu 10.04.2 and the network will not connect. This is a dual boot desktop system with Vista. The Vista network is good. When I boot up Ubuntu, the network icon seems to be searching but then the message "Wired network disconnected - you are now offline" appears. I ran ifconfig -a & got:
eth0 Link encap:Ethernet HWaddr 00:1d:09:7b:b5:29
inet6 addr: fe80::21d:9ff:fe7b:b529/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 5 Replies
View Related
Aug 11, 2010
I have a laptop with Ubuntu 9.04 on it. I wanted to try out fluxbox, so I did a apt-get install fluxbox. When I went into fluxbox, I was having trouble getting connected to my network wirelessly. I saw a post online that said to install wicd. So I did a apt-get install wicd. This removed the Gnome network manager (nm-applet) which I didn't realize that it would do. I removed wicd when I saw this is what happened, and now I can't connect to a wired or wireless network. I tried connecting to my wired network, and I ran
Code:
sudo ifconfig eth0 192.168.1.115
but I still can't access the internet, or other things on the network.
View 2 Replies
View Related
Sep 17, 2010
I rebooted my machine, and now I can't connect to the wired network for some reason. Wireless works fine.
Code:
eth0 Link encap:Ethernet HWaddr 00:18:f3:5a:66:70
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
View 5 Replies
View Related
Jul 7, 2009
I installed Fedora 11 on my computer with the live cd. If I run the live cd, the network connection is active. But, after the installation the cannt connect with the wired network. I must use an internal Server to connect the www. The server controlls my mac address and if it correct, the server allow the connection. ipconfig and the network manager can read the correct mac address. Why it does not work
View 1 Replies
View Related
Jul 14, 2011
I've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
sudo lshw -C network
Code:
*-network
description: Ethernet interface
product: 3c905C-TX/TX-M [Tornado]
vendor: 3Com Corporation
[code]...
View 9 Replies
View Related
Jul 16, 2010
i was using ubuntu 9.10 till recently when i decided to upgrade to ubuntu lucid 10.04. turns out the internet icon shows connected after fresh installation but when i try to use firefox , after an long wait it shows server not found. i did a research of my own and found that i am not able to ping even my router.using sudo dhclient eth0 doesn't recieve offers , but surprisingly when i tried dhclient eth0 in root shell with networking internet got configured very quickly and i can ping the router and any website.i forgot to mention i have a wired connection which i am trying to connect and the net is working fine with windows 7 on the same PC.
View 2 Replies
View Related
Jul 16, 2010
I need to connect to an FTP server that only accepts active FTP connections. (In Windows, I have to uncheck the "use passive FTP" option in Folder Options in order to connect) Is there a way to do this with Ubuntu's Connect to Server system/Nautilus? I would like to be able to interact with the files as if they were local, as I can on other FTPs and on Windows.
View 3 Replies
View Related
Feb 18, 2010
I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies
View Related
Jul 2, 2010
My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
View 4 Replies
View Related
Apr 30, 2010
I just did a fresh install of ubuntu studio 10.04 and I can not connect to either a wired or wireless network. The In Network Tools the IPv4 IP address is 127.0.0.1. It is plugged into a network giving out DHCP IP's. Both wired and wireless were working on ubuntu 9. I have tried to bring eth0 up in the terminal but it did not give an error or anything. It it running on a Dell Latitude D820 laptop.
View 3 Replies
View Related
Sep 1, 2010
The situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
View 2 Replies
View Related
Oct 23, 2010
I wanted to try Ubuntu again but have gone wayback to an old 8.10 disk because I couldn't get 10.10 to work. The install with 8.10 went fine but the internet will not connect. The network manager shows eth0 grayed out and when going in to manage the connection it says 'never'. I'm using Vista with a broadband modem connected to a netgear router.
View 3 Replies
View Related
Mar 26, 2011
I am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
View 9 Replies
View Related
Apr 20, 2011
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
View 9 Replies
View Related
May 5, 2011
I have recently developed a problem with my computer connecting to the internet which has totally stumped me and is currently forcing my to use windows much to my frustration. I am using ubuntu 10.04 on a Toshiba Satellite laptop. My wireless and wired network connections will not connect. They are all present in the menu and i can click on them but the connection tries to connect and then just times out and fails to connect. Everything still works fine in windows Vista. The more confusing thing is i tried some live disks to see if they would work but they all did exactly the same thing including a live disk of ubuntu 9.10 which used to work perfectly and live disks of openSUSE 11.4 and Mint 10. I struggling to tell if this could be a hardware problem or not. The fact that the live disks wouldn't work suggests a hardware problem but the fact that Vista still works totally throws that argument. I have looked all over these forums and elsewhere and have found some similar ish problems but non seem to have the severity of this one as all of those seem to be wireless only problems. The only thing that i was doing at the time this started was i had just set up a new secondary user account but i suspect that may be coincidental.
View 4 Replies
View Related
Nov 19, 2010
I want to use FTP client (for example ncftp) to connect in active mode. I have firewall (iptables) on my laptop and most of time I am behind rooter. With outgoing packets and with passive mode all is working fine.But some sites accept only active mode.I could open some port range in firewall and in rooter for active data packets, but I don't know how to solve security issues.So how should I correctly manage active ftp connection?
How can I set data port range when opening active connection with ncftp (or maybe another ftp client)?How can I limit that incoming connections to that ports range is accepted only by ncftp or else dropped?
View 1 Replies
View Related
Mar 6, 2010
I installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies
View Related
