The situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
connect to my wired connection using the terminal?i screwed myself over and dont have a desktop menu bar,and i need to connectto the internet so i can get it back.
View 4 Replies View RelatedUsing 10.10 and have a wired connection that according to the system is connected, but when I open a browser I can't connect to any sites. What am I missing here? I can't for the life of me figure this out.
View 6 Replies View RelatedI have installed Ubuntu for the first time (version 11.04), finally making the step to open source software. Everything seems to be working fine, however I can't connect to my router via a wired connection.I can use the wireless network,hich was detected and I could connect by giving the code. But when I try to connect to this network by wired network, it tries to connect and it says "connection offline" after a while. It never establishes a connection. I used the standard automatic DHCP settings of eth0. I never got this problem with another OS and it's not the cable that's not working
View 9 Replies View RelatedI have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
Since that time I moved to Archlinux and I love it. I do however run lubuntu live from a USB for my work PC. I am having a problem with it. I think it's okay to post here because the core of the system is still Ubuntu. I don't think LXDE is the problem. I start up the live environment and it says 'wired connection connected' but I can not load any pages or do anything.
I thought it may be a problem with configuration so I copied down (from Windows) the IP, Subnet, Gateway and DNS. I put them in manually and it doesn't say connected any more and still no connection at all. I am unsure what to do from here. I am not really familiar with Ubuntu enough to try much. I tried to 'dhcpcd eth0' but dhcpcd isn't installed. I guess the default Ubuntu network manager has dhcp enabled automatically.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View Relatedhow to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedMy laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
View 8 Replies View RelatedI have been trying to connect to the internet with a wired LAN connection for a while now with no luck. Running version 8.04 LTS on a 32-bit desktop. Interestingly, my 64-bit desktop running version 8.04 64-bit automatically connected to the internet with no problems or input from me. Both are connected to the same router.
I figured i'd try and copy the network manager settings from the 64-bit machine to the 32-bit machine, which involved setting an automatic configuration (DHCP}. All went well except no DNS server address showed up on the 32-bit system, despite there being one on the 64-bit system. Trying to run Firefox like this results in the 'page load error' page coming up immediately.
I then manually added the DNS server address from the 64-bit system to the 32-bit system, and all that did was prolong the time it takes for the 'page load error' page to appear.
I just installed ubuntu 8.10 on my pc. Before was XP installed. I formatted the system and installed ubuntu. Installation was successful. Problem is that I cant connect to network. My network card: realtek 8139 ethernet card
On ifconfig I get:
Code:
eth0 Link encap:Ethernet HWaddr 00:16:76:af:23:b3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:23 Base address:0xb800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:502 errors:0 dropped:0 overruns:0 frame:0
TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31896 (31.8 KB) TX bytes:31896 (31.8 KB)
Also the connection is wired one with modem only it's reliance broadband. The wire is connected between modem and pc but there is no blinking of light for this connection. The wan is active and wan's light is blinking and when I was on xp on same pc there was no such problem.
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
Output of dhclient
I have just setup Ubuntu on my Dell Laptop a Lattitude C640 with a 3Com 3c905C Tornado Wifi Card. Well the wired and wireless do not work. They try to connect then bang no connection. I would be able to make some headway I think but I have no basic skills with Ubuntu. I have mastered how to get info from the terminal but how the heck to you edit a file? How do you get to that stage?
View 4 Replies View RelatedI've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
sudo lshw -C network
Code:
*-network
description: Ethernet interface
product: 3c905C-TX/TX-M [Tornado]
vendor: 3Com Corporation
[code]...
everything works good in windows environment. still in ubuntu 9.1 which i am using , cannot access internet using connection manager
View 4 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
I have two PCs one has Windows XP the other has Ubuntu 9.10 on it, the Windows PC has no problems getting on the Internet (I'm posting this with it) and getting an IP address from the wired router. The wired router I have is ONLY wired it does not have wireless at all, it is currently setup to hand out IP addresses between 192.168.1.2 and 192.168.1.254.
The Ubunutu 9.10 PC worked great last night surfed all over the place for hours, then finally shut it down last night when I went to bed, shut down appeared to be normal like it always does when it shuts down, then this morning when I booted it up it gave error: "WIRED NETWORK - disconnected you are now offline".
I am using ubuntu in my new office, and I can't get the network working. The "official" OS installed was a Windows, and it has a special "dial-up" app for the LAN connection (not wireless). My network admin is apparently not helpful, since he actually knows nothing about the internals for the "dial-up" app (he did not even ever heard of TTLS, PEAP, MD5, etc), and claimed that no OS except for Windows can work...
Well, I have tested various configurations with my Mac laptop, and apparently the LAN connection requires 802.1X authentication, and it's using a very weird combination "TTLS+PEAP+MD5" (if I check these options in Mac OS X, the connection works). However, in NetworkManager, I can't select both TTLS and PEAP, and moreover, TTLS does not work with MD5. So, is there anything I could try?
Fresh install of UbuntuStudio 10.04. This is really bizarre.
I can't seem to connect to the wired connection mainly because there is no connections tab (pic attached).
Here's some printouts:
dmesg:
Code:
lshw -C network:
Code:
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies View RelatedI've had a computer running Ubuntu connected to my TV for a few weeks now, but as of yesterday, I can't get it to keep a connection to the Internet. Everything works well for an hour or so after a reboot, but then no WAN connections work. When this happens, no sites load in Firefox or Chrome, I can't ping Google, I can't SSH to the box from work, and none of the pages I have running on apache load from remote computers. However, all local area connections seem to work fine. SSH from within my LAN takes much longer than usual, but it does still connect.
View 2 Replies View RelatedI have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies View Relatedinstalled Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
I recently did a whole system wipe and got rid of windows all together!! Unfortunately, that means I have to start over with the whole networking thing. I know I have a bcm4311, but I have no idea what I have for a wired adapter. I know that I could search through everything to find what I need, but there is so much info for all the different versions. I have ubuntu studio. Can someone tell me the commands to type into the terminal to find out what I have for the wired network card and recommend a place to get the proper "drivers" to get my computer working again?
View 5 Replies View Related