Ubuntu Networking :: WPA Wireless On Eee PC 1000?
Jun 24, 2010
I am having trouble establishing a connection with my WPA wireless network at home. Other laptops at home can connect to this network and even the Eee PC can join free wifi networks. The problem seems to be only with WPA networks. When I enter the password for the WPA network, it tries to connect for a while and then shows me the password dialog box again. I don't get any IP during this time, its always 0.0.0.0 I reinstalled my Ubuntu netbook remix but that didn't help. This problem was occurring in the standard Ubuntu 10.04 too.
View 2 Replies
ADVERTISEMENT
Feb 5, 2010
I am trying to get the RT2860 card in an Eee PC 1000 to work. I have tried Ubuntu 8.04 and 9.10, all the "fixes" below I can find on the web but nothing seems to work.
[URL] I downloaded the source code from Ralink and using module-assistant followed the instructions.
I can see the wireless network, it tries to connect but just keeps asking for the security key. I have tried WEP, WPA and no security at all but still no go. All works fine if wired. The F2 toggle seems to work OK, the WLAN is switched on in the BIOS. The "iwconfig" command shows the RT2860 in Ubuntu 9.10 but not in Ubuntu 8.04.
View 2 Replies
View Related
May 2, 2010
I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
View 4 Replies
View Related
Oct 31, 2010
I use ubuntu netbook for an eee pc 1000h because windows is underpowered. I got it working perfectly in 10.04. I upgraded to 10.10 thinking, if they got it right with 10.04 then surely 10.10 should be fine. All function keys except wireless work.
1. After sleep, wireless turns off. Have to restart and re-enable in bios.
2. If I disable and the re-enable wireless networking it tries to connect but never does resulting in a reboot needed. Checking bios wireless is enabled and connects perfectly on reboot.
Just don't close the lid and sleep because you need a restart. Why would 10.04 be easy and the new version fail? I am windows user and linux does not do this kind of thing normally. MS screws things up with upgrades not linux surely.
View 5 Replies
View Related
Jul 7, 2011
I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
View 3 Replies
View Related
Aug 9, 2011
My wireless card is:
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0083]
On Fedora 15, when I boot kernel 2.6.40, my laptop is unable to connect to my wireless-G AP. dmesg shows the following:
Code:
[ 43.866090] wlan0: direct probe to 00:27:19:14:c2:ca (try 1/3)
[Code].....
It works fine, however, when I boot using kernel 2.6.38 (from which I am posting) and in Windows. Also, I found some emails from the linux-wireless mailing list which appear to be talking about the same problem.
The system is fully updated. I've tried the 11n_disable=1 hint I came across on the ThinkPad wiki, but it didn't help. (I'm on an Asus K42Ja, in case it's relevant)
Although I'm fine with staying at 2.6.38 for now, are there workarounds/fixes for this?
View 7 Replies
View Related
Feb 18, 2011
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
View 1 Replies
View Related
Jul 12, 2011
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
View 3 Replies
View Related
Sep 24, 2010
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
View 5 Replies
View Related
Jun 9, 2015
I've noticed that my wifi connection is significantly slower than my wired connection. Obviously wired is always faster, but when I boot in to windoze or use Mac, the difference between wired and wifi is negligible. I'm running Debian 8 testing on a Lenovo X201 with Intel Corporation Centrino Wireless-N 1000 [Condor Peak] network card.
View 14 Replies
View Related
Sep 22, 2009
I have a router that is 1000 Base T and two computers each with ethernet cards that support 1000 Base T. All are equipped with Cat 5e cable. Before I had a router that only went up to 100 Base T and I would setup one box with linux running proftpd. On the other box,I would use win xp pro and use firefox to ftp into the other box and download a file. Download speeds went up to 11.2 MB/sec. Now when I switched routers, I expected something like 120 MB/sec but I'm only getting 5.3 MB/sec. What do I need to change?
View 12 Replies
View Related
Apr 5, 2010
I have a few computers on my home network and I want to get them running at 1000Mbs Both my Ubuntu Machine and my Mac already have the hardware to run at that speed but my switch is 100Mbs so I am going to buy a new 1000Mbs switch. Do I need to change any settings in Ubuntu 9.10 to allow for 1000Mbs networking?
View 1 Replies
View Related
Jun 19, 2010
I'm operating a server running Slackware 12.1 and I need to install a PCI-E 10/100/1000 NIC, im just wondering if anyone has any recommendations for a card that has solid support under linux or is otherwise known working.
View 1 Replies
View Related
Feb 20, 2010
env: debian kernel 2.6.31/ gcc 4.x/ hp6910p I encounter a problem whilst trying to connect online using Intel PRO/1000 nic, but fail. It seems the problem of nic (Intel PRO/1000 'e1000e').
dmesg | grep e10001 shows
Code:
Intel(R) PRO/1000 Network Driver - 1.0.2-k2
PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci_enable_pcie_error_reporting failed 0xfffffffb
irq 29 for MSI/MSI-X
dmesg | grep eth0 shows
[Code]...
What should I do so that I am able to solve this issue or does any resource/ doc tell how to configure e1000e to enable Intel PRO/1000 nic?
View 2 Replies
View Related
Sep 1, 2011
I installed the netbook version of ubuntu 10. Problem is no wireless networks show up. So I have an eternet connecting. Only problem is when I plug that in, still no internet. I need to download drivers to make the wireless work.
View 1 Replies
View Related
Sep 10, 2009
I have a Broadcom NetXtreme BCM5754 NIC and I cannot seem to get the NIC to auto link at Gig speeds. It will only link @ 100/full.
View 1 Replies
View Related
Aug 9, 2010
I have two onboard gigabit connections and a PCI-E gigabit card, none of which seem to want to run beyond 100M. Everytime I issue the command to change speed to 1000M, it does nothing. I have tried modifying the interfaces file to make sure the command line for ethtool gets done automatically, but still no luck.
Below is the output from the use of ethtool to change speed. Since I am having performance issues with my local area networking (e.g. Samba transferring slower than the internet), I have been trying to figure out how to debug my network performance, and this was an obvious thing that stood out. The router and card are gigabit, yet don't use their full transfer rates.
[Code]...
View 9 Replies
View Related
May 9, 2010
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
Code:
$lspci 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Code:
$ sudo lshw -C network
SCSI
[Code]...
View 5 Replies
View Related
Jul 17, 2010
Have been using Ubuntu Desktop Amd64 for 6months, on a dual boot alongside Vista64. Since first installing the OS, I have switched over to Ubuntu & use Windows only for heavy multimedia edition & the occasional gaming.I just bought a netbook and installed Ubuntu 10.04 LTS NBR. Works great, except for wlan. No propriety drivers available for my Intel Wifi Link 1000BGN.
I've spent hours trying to install iwlwifi, but the process is somewhat complicted for a noob such as myself.After much reading and trying, I've managed to download and install iwlwifi-1000-ucode-128.50.3.1.tgz, (following the http://intellinuxwireless.org/?p=iwl...=howto-iwlwifi instructions)and am now working on installing the mac80211 subsystem (following the http://intellinuxwireless.org/?p=mac...howto-mac80211 instructions)When running
Code:
% wget
intellinuxwireless.org/mac80211/downloads/mac80211-10.0.4.tgz[/url]
[code]....
View 2 Replies
View Related
Dec 9, 2010
I recently had my AE 1000 linksys wireless adapter driver installed, the info for which can be found here:
[URL]
But today I was presented with 142 automatic updates already downloaded waiting to be installed on my computer. I installed the updates and restarted my computer for the updates to take effect. Well, since then my wireless adapter no longer registers at all, it doesn't even recognize my router let alone connect to it. It is as inoperable as the day I got it.
I am currently using a different computer in the house to get internet. Should I go about following the same directions I did before and reinstall the driver, or is there a more simple way?
View 4 Replies
View Related
May 31, 2011
My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.
View 8 Replies
View Related
Oct 24, 2010
I had to add them to my firewall script when I installed openvpn on my dd-wrt router:
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.
View 1 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Jun 23, 2009
With the official release of Fedora 11, I decided to make an updated tutorial on how to install it and configure it on the Eee PC 901/1000. You can find the tutorial and packages on the fedora-eee website. I just started this thread for Eee PC-specific F11 troubleshooting and any questions or remarks regarding the procedure or packages.
View 14 Replies
View Related
Aug 17, 2010
I'm converting my coworker to Linux (who loves it) and I've gotten everything working but this %$#@ printer! I've tried the various solutions posted on these forums (over the past 4 or 5 years). But none of them seem to work.Has anyone solved this problem with Lucid (10.04)? Are there some new steps that pertain to 10.04?
View 2 Replies
View Related
Dec 27, 2010
Deviating from Ubuntu standard, for compatibility with another system in our network (an intradisk NAS with restricted admin features) I have to stick with user IDs below 1000 (namely 501, 502, ...)
In the Ubuntu logon screen, the related users are not shown - and thus cannot be selected for unlocking a session that was locked due to inactivity.
View 4 Replies
View Related
Jul 23, 2011
I deleted /etc/passwd.lock and /etc/gshadow.lock. Now when I run normal command installation, I receive this following error-
rocky@ubuntu:~/Downloads/Modified Oracle$ sudo apt-get install bc
sudo: unknown uid: 1000
rocky@ubuntu:~/Downloads/Modified Oracle$
I'm unable to use sudo, please let me know what did I messed up. And how I correct this mistake? Why unknown uid:1000 is coming?
View 7 Replies
View Related
Jan 4, 2010
I have a problem, I changed the own of all the etc folder, it was a mistake, but I can't change it again, now, I cant use "sudo" because root is not the own. When I try to use "sudo" this is the error: sudo: /etc/sudoers is owned by uid 1000, should be 0. so, the own is my user instead of the root. How can I change it again?
View 6 Replies
View Related
Feb 14, 2010
Apologies if this has been asked before, which I'm sure it has from what I see googling around, but I cant understand this fully.
I have a piles of files in the .Trash-1000 folder on my flash drive that I want to delete. I can see them if I go in as root using the command line and entering "gksu nautilus" but it still wont allow me to delete them.
View 9 Replies
View Related
May 5, 2010
Straight to the problem on my [Ubuntu 9.10].I cannot delete or empty my .Trash-1000 folder on my flash drive. I tried changing permission with chmod but no way, I cannot empty the folder via the Ubuntu main trash option 'Empty Trash'. I read a bunch of threads but no way.Do you know a solution that works to this problem?Even further. Do you know a way to tell nautilus to avoid using that folder in my USB devices and use instead the normal trash folder on my system?
View 5 Replies
View Related
