Ubuntu Networking :: EeePC 1000 HE Wireless Not Working / Why Is So?
May 2, 2010
I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
View 4 Replies
ADVERTISEMENT
Feb 5, 2010
I am trying to get the RT2860 card in an Eee PC 1000 to work. I have tried Ubuntu 8.04 and 9.10, all the "fixes" below I can find on the web but nothing seems to work.
[URL] I downloaded the source code from Ralink and using module-assistant followed the instructions.
I can see the wireless network, it tries to connect but just keeps asking for the security key. I have tried WEP, WPA and no security at all but still no go. All works fine if wired. The F2 toggle seems to work OK, the WLAN is switched on in the BIOS. The "iwconfig" command shows the RT2860 in Ubuntu 9.10 but not in Ubuntu 8.04.
View 2 Replies
View Related
Feb 18, 2011
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
View 1 Replies
View Related
Nov 18, 2010
After about an hour of using my Eeepc 1000 there is random sustained SSD access. How can i check what is accessing the SSD so much?
View 3 Replies
View Related
Jun 24, 2010
I am having trouble establishing a connection with my WPA wireless network at home. Other laptops at home can connect to this network and even the Eee PC can join free wifi networks. The problem seems to be only with WPA networks. When I enter the password for the WPA network, it tries to connect for a while and then shows me the password dialog box again. I don't get any IP during this time, its always 0.0.0.0 I reinstalled my Ubuntu netbook remix but that didn't help. This problem was occurring in the standard Ubuntu 10.04 too.
View 2 Replies
View Related
Oct 31, 2010
I use ubuntu netbook for an eee pc 1000h because windows is underpowered. I got it working perfectly in 10.04. I upgraded to 10.10 thinking, if they got it right with 10.04 then surely 10.10 should be fine. All function keys except wireless work.
1. After sleep, wireless turns off. Have to restart and re-enable in bios.
2. If I disable and the re-enable wireless networking it tries to connect but never does resulting in a reboot needed. Checking bios wireless is enabled and connects perfectly on reboot.
Just don't close the lid and sleep because you need a restart. Why would 10.04 be easy and the new version fail? I am windows user and linux does not do this kind of thing normally. MS screws things up with upgrades not linux surely.
View 5 Replies
View Related
Jul 7, 2011
I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
View 3 Replies
View Related
Jul 25, 2011
I've tried a few suggestions in similar threads.. to no avail. I thought I had it fixed a few days ago when I noticed that the wireless would randomly disconnect only on battery power. So I tried "iwconfig wlan0 power off" and then reconnected. It worked, for a while, but then after minutes/hours later it will disconnect and stay disconnected until I restart. If you need anymore information, let me know. I might need to be walked through the process; though, as I'm a worthless noob.
View 1 Replies
View Related
Dec 27, 2010
My netbook model is Asus eeepc 1201n and I'm running Ubuntu 10.10 but I had the same problem while running 10.04: wireless disconnects and reconnects every 30 minutes or so and, after this has happened for a few times, it doesn't reconnect and keeps asking for the password.
View 9 Replies
View Related
Aug 9, 2011
My wireless card is:
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0083]
On Fedora 15, when I boot kernel 2.6.40, my laptop is unable to connect to my wireless-G AP. dmesg shows the following:
Code:
[ 43.866090] wlan0: direct probe to 00:27:19:14:c2:ca (try 1/3)
[Code].....
It works fine, however, when I boot using kernel 2.6.38 (from which I am posting) and in Windows. Also, I found some emails from the linux-wireless mailing list which appear to be talking about the same problem.
The system is fully updated. I've tried the 11n_disable=1 hint I came across on the ThinkPad wiki, but it didn't help. (I'm on an Asus K42Ja, in case it's relevant)
Although I'm fine with staying at 2.6.38 for now, are there workarounds/fixes for this?
View 7 Replies
View Related
May 31, 2011
My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.
View 8 Replies
View Related
Mar 12, 2011
On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
View 3 Replies
View Related
Jun 3, 2010
I have just purchased an Asus EeePC 1001HA netbook and I would like to install Ubuntu Netbook Edition 9.10 (love the look and the brilliant interface), but I can't get the wireless network to work. I am currently running from a 4Gb USB stick that has the LiveCD on it with a 1Gb persistence. The network notification area only shows wired and VPN connections. I have tried installing the Ralink 3090 driver but I have had no luck in getting the wireless to work.
View 8 Replies
View Related
Jul 12, 2011
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
View 3 Replies
View Related
Sep 24, 2010
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
View 5 Replies
View Related
Oct 1, 2010
I just recently installed Ubuntu on the HP Mini 1000 and the drivers for the WiFi aren't working correctly. Is there a place where I can download the Drivers for WiFi and get them to install.
View 1 Replies
View Related
Apr 17, 2011
after installing linuxmint lxde on my netbook the microphone wasnt working i followed the guide here [URL] and now nothing audio related is working, when i open alsa mixer it is completly blank, i dont even have the little speaker icon in the corner anymore. I would like to get all audio working with the microphone but priority right now would be getting back to were i started upon doing that modprobe command thingy the device does show up... also upon following that guide it made a folder in my home directory called soundtmp... and it wont let me delete it, how can i delete it?
View 11 Replies
View Related
Jan 16, 2011
I recently installed F14 on my EEEPC 1000H. Fedora is the distro that fully supports it, at least F13 (with the wireless drivers installed seperately). I noticed that F14 worked totally out of the box, without even having to install wireless drivers. However, there is a problem: If I turn off the wireless (using Fn + F2, I haven't tried any other ways) I then can't turn it back on. I mean, the lights indicating the wireless is working are on, Fedroa still says "Device is not ready".
View 1 Replies
View Related
Jul 6, 2010
For a long time, on my netbook Asus EEE pc1000 working fine with my wireless (connecting WEP, WPA). Running with kernel 2.6.29 + rta2860sta v2.2 (package downloaded from the software repository , a user repository)
After somes updates (kernel mainly), all stop working. So I recompile the module v2.2 but don't work. I download from the ralink site the last version , recompile and installed , and appear work fine, but I don't know why the opensuse like to be very annoying and the knetworkmanager don't recognize the device. So , again I download a package from a user repository with the version 2.3 , what appear starts working again. Knetworkmanager recognize the device, but isn't cappable to connect in a WEP network. With WPA works fine.
If I disable the device in knetworkmanager and try configure manually , sometimes work. Probably have some sequence of command what I don't figure out what is. To configure WEP network before this problems I always use only the "iwconfig" command. But I try with "iwconfig" and "iwpriv" and don't work. So , afiter trying a lot of sequence, now I got connected to WEP network, but is very weird how they show this connection,
[Code]...
View 2 Replies
View Related
Jun 9, 2015
I've noticed that my wifi connection is significantly slower than my wired connection. Obviously wired is always faster, but when I boot in to windoze or use Mac, the difference between wired and wifi is negligible. I'm running Debian 8 testing on a Lenovo X201 with Intel Corporation Centrino Wireless-N 1000 [Condor Peak] network card.
View 14 Replies
View Related
Jan 1, 2010
Target : to make wifi card working on EEPC 1000H
Problem : RT2860 card is not working
Question : how to make it works? what are the next steps ?
Steps :
1. Fresh installation of Fedora 12 from USB keys + remote FTP server : installation is ok
2. Update the system :
Code:
yum update
3. Add repository :
Code:
[URL]
4. Add the RT2860 :
Code:
yum install rt2860
[code].....
View 3 Replies
View Related
Jan 27, 2011
I've been through a few versions of Slackware on my Asus EeePC and I must, despite that fact that every has been having lots of trouble (or so I've heard) configuring Linux on it, it hasn't been all that bad for me. One problem that continues to persist is that the brightness setting is weird. It doesn't like to display on full brightness most the time, and when I try to change the brightness (function keys or OS function), it goes through 3 'mini-cycles'.
I've tried the Alien eeepc-acpi-scripts slackbuild a while back and it didn't work for me before. While searching for another solution, I found this thread on the Ubuntu forums: [URL]. But the major fix that seems to be working for them involves editing GRUB (which I don't have). Another post suggests simply updating the BIOS, but the BIOS updater is a Windows executable, and I'm not quite sure how he pulled it off in Linux.
View 1 Replies
View Related
Sep 22, 2009
I have a router that is 1000 Base T and two computers each with ethernet cards that support 1000 Base T. All are equipped with Cat 5e cable. Before I had a router that only went up to 100 Base T and I would setup one box with linux running proftpd. On the other box,I would use win xp pro and use firefox to ftp into the other box and download a file. Download speeds went up to 11.2 MB/sec. Now when I switched routers, I expected something like 120 MB/sec but I'm only getting 5.3 MB/sec. What do I need to change?
View 12 Replies
View Related
Jul 21, 2010
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Mar 18, 2011
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions.
eth0 no wireless extensions.
and lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
[Code]...
View 1 Replies
View Related
Jul 18, 2011
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
View 9 Replies
View Related
Feb 16, 2011
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
View 9 Replies
View Related
Jul 8, 2011
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
View 9 Replies
View Related
Apr 5, 2010
I have a few computers on my home network and I want to get them running at 1000Mbs Both my Ubuntu Machine and my Mac already have the hardware to run at that speed but my switch is 100Mbs so I am going to buy a new 1000Mbs switch. Do I need to change any settings in Ubuntu 9.10 to allow for 1000Mbs networking?
View 1 Replies
View Related