Ubuntu Networking :: Using Squid To Appear In Another Country?
Feb 7, 2010I have a VPS. I intend to use it as a squid server. I need to know how to configure Squid so it works as a simple proxy server. Don't need authenication etc.
View 1 RepliesI have a VPS. I intend to use it as a squid server. I need to know how to configure Squid so it works as a simple proxy server. Don't need authenication etc.
View 1 RepliesFedora 12, ath5k, used #iw reg set DE to enabled channel 12 and 13 for wireless.
But every time reboot the setting will get lost and reset to US.
Where is the best place to set this permanently?
I have Debian installed in embedded PC which is in a vehicle . This PC collects information related to engine .This pc is connected to internet using Verizon USB 175 modem.i connect to internet uing Wvdial. On connection it gets dynamic IP and uing this Ip i planned to login through Putty.This whole system Is in US , when i was in US i had laptop which is connected to internet using verizonPCMCI modem. from that laptop i used putty and entered dynamic ip in Putty and i could successfuly login to the system in vehicle.But when i came back to India i tried to login to the system , here i have different ISP not verizon , i tried to ping that IP ( technician called from US and informed the new IP ) in the Vehicle and i was successful in doing that , i got echo to my ping. Now using that Ip in putty to login but i could not login ,it gives time out
View 7 Replies View RelatedI am trying to configure Fedora 11 Samba PDC with LDAP backend. All information on how to was obtained at http:[url].......The Howto is not complete. However, I have a real problem when configuring ldap.conf and slapd.conf as I will replace the domain acpng.org.pg with the examples. The problem is when entering the following:
URI ldap://127.0.0.1/
HOST linux-srv1.pqrst.org.nk
BASE dc=pqrst,dc=org # now here, do I put another dc=nk for the
I'm having an issue where a server in CA (1000/full) and in VA (100/full) have very lopsided data transfer.
CA -> VA with iperf shows ~20Mbps
VA -> CA with iperf shows ~93Mbps
If we change the CA server to 100/FULL, transfer speed is 93Mbps both ways.
Some tuning was done to TCP window scaling parameters, but it won't correct the issue, just improve the CA -> VA numbers to what is listed above. I will say, turning TCP window scaling OFF will lower the transfer speed both ways to < 20Mbps.
The only clue I have when looking at wireshark dumps is that the window scale going OUT would never go past 10240 (scale is 8, so 2^8 x 40bytes). In the opposite direction, the window size will go above 3MB (scaled).
It is not a bandwidth problem as iperf with UDP shows 93Mbps both ways. Local transfers (CA 1000/full to CA 100/full) show full speed both ways, so I feel it is strictly related to TCP window scaling.
RedHat 5 64-bit on both sides. Any ideas why it won't scale above 10240?
I'm looking for a program like "Hide My IP" (which is for Windows) which I can use to change my IP address to that of one in another country. I'm from the Netherlands and live in the US which makes it impossible on a lot of Dutch television network websites to watch programs because a lot of those are viewable in the Netherlands only. I understand there are some web-based sites that can do that, but I was hoping there is actual software out there? I'm using Ubuntu 10.04 LTS.
View 7 Replies View Relatedi had a problem in software sources so i changed the server to main server now i can't find the server of egypt in the list of servers
View 1 Replies View RelatedHow can I know whether using restricted-extras is legal in my country?
View 6 Replies View RelatedI have a Linux Mint 10 machine and would like to be able to share a folder with my grandfather who is 5000 Miles away...
View 9 Replies View RelatedThe following before.rules file will block all connections from:
Korea
China
India
Russia
[code]....
What I need is a database that can show a Timeline and have the basic functions for searching by date and other criteria. Not in a hurry is for a future project. Any clues?
View 6 Replies View RelatedI used the Ubuntu server 10.10 for cache and proxy purpose. I install squid 2.7 stable 9. My problem is to cache the some url by force. eg . [URL]...I search the clues by using google. but I only found how to block the url. so I come here and request the advice. I want to cache the couple of site because of our country have bandwidth problem.
View 2 Replies View RelatedBrowsing thru the dmesg output, I saw this:
cfg80211: Calling CRDA for country: MX
cfg80211: Regulatory domain changed to country: MX
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[code]....
Wireless works fine, but I'm not currently in Mexico, so where is this coming from?
I have a list of 2 character country abbreviations used in the Maxmind GeoCountry database that I need to convert to the standard 3 character country abbreviation ISO 3166-11 format. I could have a long list of sed substitute statements for each country.
Code:
sed "s/US/USA/g" <file>
Is their a more elegant way to do this? Maybe an array of some sort? This substitution will be used in a bash script.
I'm booting a usb stick with a custom initrd.gz, which contains a preseed.cfg at /. This preseed.cfg has the following initial lines:
d-i debian-installer/language string en
d-i debian-installer/country string BR
d-i debian-installer/locale string en_US.UTF-8
But the installer keeps asking for language/country/locale.
i followed a Tutorial about configuring apache to have HTTPS Protocole , but since i ask for a certificate , i can't input information such country code etc , i'm runing this configuration on Webmin , i'm using Debian of course so how can i input the code ?
View 1 Replies View RelatedI am comparing jwhois and whois. Specifically, I want to resolve the country and Internet registry source for 150.216.2.252. The correct information is United States and ARIN; however, using the whois command it says it is in Australia and APINC. This is incorrect. I have compiled jwhois; however, it will not work on ip address. It will resolve cnn.com and other websites; however, will not work on ip address such as 150.216.2.252. When I try to use an IP address it says:
jwhois-4.0$ jwhois 207.58.150.216
[Querying whois.arin.net]
[Unable to connect to remote host]
How can I get jwhois to work on this ip address or whois to resolve the correct United States information?
i am suing SUSE 10.00 and i need remote assistance from friend in another country. I think this can be done in windows xp using "remote assistance". How can i do this using linux suse?
View 2 Replies View RelatedI need something to make a script that will search some logs and extract IP hits from one country only. Let's say UK. I guess I need to use GeoIP or some database. I just need a very simple bash, perl, php script that will do this job. Just search threw logs (apache) and then give me number of hits found from UK.
View 5 Replies View RelatedI am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI try use Squid as my proxy server. When I set my firefox to use my proxy server (squid), all is ok, but when I set firefox on another pc (from internet, not local network), all request returned time out turn off my router and connect PC to internet (without router), but still don't work.In iptables is all ok, I think. Where is problem? I think, It isn't problem with squid (because squid don't show error page), but I don't know how fix it
iptables:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Edit: SSH from remote pc work fine.
I would like to be able to shutdown squid (/etc/init.d/squid stop) via a web URL. Does anybody know if something exists like this, or do I need to write a CGI script or equivalent?FWIW: Yes, I have an 8 year old son that needs some persuasion to GET OFF THE COMPUTER .
View 1 Replies View RelatedI need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?acl blocksites url_regex yahoohttp_access deny blocksitesI have also tried saving some url & filter content in a file and edited configuration as follows,acl blocksites url_regex "/etc/squid/squid-block.acl"http_access deny blocksitesThe squid-block.acl file contents are.cricinfo.commp3
View 2 Replies View RelatedI need to create two Access Control Lists for my networks using SQUID proxy. The ip address range from 165.165.42.10 to 165.165.42.50 for one network and from 165.165.42.60 to 165.165.42.90 for another network. How can I make it?
View 2 Replies View RelatedI'm having problems with squid, and i don't know how to solve them because I'm new to linux. a. Why squid in my computer often does not work? The process has already started (using the command sudo squid start), but the Internet on client computers can not connect. This can be be resolved if the proxy server computer is restarted. Anybody know why is this happen?
b. How do I set the client bandwidth limitation using squid? I want the client computers can only use maximum 60-70 KB / s. Do I need another additional software package?
How to configure SQUID proxy server in ubuntu 9.10 ?
View 7 Replies View Relatedhow-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies View RelatedAfter following the below how to im no longer able to browse the internet.
[URL]
This happened after issueing the command:
sudo update-rc.d tproxy defaults