Networking :: Unable To SSH Using Putty Remotely (different Country)?
Dec 25, 2008
I have Debian installed in embedded PC which is in a vehicle . This PC collects information related to engine .This pc is connected to internet using Verizon USB 175 modem.i connect to internet uing Wvdial. On connection it gets dynamic IP and uing this Ip i planned to login through Putty.This whole system Is in US , when i was in US i had laptop which is connected to internet using verizonPCMCI modem. from that laptop i used putty and entered dynamic ip in Putty and i could successfuly login to the system in vehicle.But when i came back to India i tried to login to the system , here i have different ISP not verizon , i tried to ping that IP ( technician called from US and informed the new IP ) in the Vehicle and i was successful in doing that , i got echo to my ping. Now using that Ip in putty to login but i could not login ,it gives time out
View 7 Replies
ADVERTISEMENT
May 25, 2010
Just throwing in a quick question to see if anyone got any ideas about this.I'm unable to create a remote X session with TightVNC viewer. The local computer is a windows XP box and the remote server is running Slackware 13.
Using Putty on the XP box to connect to Xvnc through a ssh tunnel works just fine. However, when I fire up TightVNC viewer and try to connect to 127.0.0.1 as I'm used to, TightVNC viewer is unable to establish a connection to X. I'm puzzled.
This has worked when I used another XP box as local computer. I'm running all within my LAN. Can this be a firewall/iptables issue? I've obviously posted this in wrong forum category. Sorry about that. Starts this thread in server category too.
View 1 Replies
View Related
Jun 4, 2010
Tried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies
View Related
Jun 29, 2011
I'm not terribly new to Linux, but I am new to the forums, so hear me out! I am in the process of creating an electronic mapwall for our meteorology program, and have designed the computing system from scratch. I have two Linux Boxes, each with capabilities for 6 attached monitors...a total of 12 displays driven from two machines. My intention is to have one machine be the master...it has a touchpanel control. The inputs to the touchpanel will then trigger events for the both the master and the slave machine to display. Each of them has a specific IP address (DNS entry), and are not on a subnet.
Now...is there a way to remotely login to the slave machine and have it display on it's OWN monitors? The code is Java and which works on the master machine to animate directories of .gifs for each of the master's attached monitors. I will most likely have Java execute shell commands for the remote login (ssh), but I believe the answer lies somewhere in the X-configuration. Do I have the machines in an adverse configuration (creation of a subnet would be better)? Lots of questions...lots of desire...few answers!
View 2 Replies
View Related
May 7, 2010
Fedora 12, ath5k, used #iw reg set DE to enabled channel 12 and 13 for wireless.
But every time reboot the setting will get lost and reset to US.
Where is the best place to set this permanently?
View 2 Replies
View Related
Feb 7, 2010
I have a VPS. I intend to use it as a squid server. I need to know how to configure Squid so it works as a simple proxy server. Don't need authenication etc.
View 1 Replies
View Related
Oct 31, 2009
I am trying to configure Fedora 11 Samba PDC with LDAP backend. All information on how to was obtained at http:[url].......The Howto is not complete. However, I have a real problem when configuring ldap.conf and slapd.conf as I will replace the domain acpng.org.pg with the examples. The problem is when entering the following:
URI ldap://127.0.0.1/
HOST linux-srv1.pqrst.org.nk
BASE dc=pqrst,dc=org # now here, do I put another dc=nk for the
View 4 Replies
View Related
Apr 6, 2010
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
View 1 Replies
View Related
May 15, 2010
I am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies
View Related
Oct 28, 2010
I use Xmanager to connect to a linux machine (ubuntu 10.10). However there is no display. Here is the log:
Code:
[13:43:27] Connected.
[13:43:28] Version exchange initiated...
[13:43:28] server: SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu4
[13:43:28] client: SSH-2.0-nsssh2_3.0.0011 NetSarang Computer, Inc.
[13:43:28] SSH2 is selected.
[Code].....
View 6 Replies
View Related
Jul 21, 2010
I've been using transdroid on my nexus one to access transmission successfuly for some time now. But transmission is just too limited for what I really want. I really like either deluge or ktorrent and want to use them but this far I haven't been able to access either one remotely via transdroid. I'd greatly appreciate and advice anyone can offer.
I'm at work right now but can go into further details once I get home if need be. I've set up the webui plugin via the preferences menu in ktorrents settings and just can't get transdroid to connect.
View 2 Replies
View Related
Dec 15, 2010
This issue was prompted by Groupwise MTA not communicating with a Post Office that I had migrated to our first Linux box. I found out why, because I cannot communicate with it at all, other than through ethernet. I'm not sure what the problem is. I've checked the firewall and opened up all the ports that I'm trying to communicate on.ve made sure Apache is loaded
View 2 Replies
View Related
Sep 24, 2010
I have been using TightVNC (on XP) to remotely connect to my Ubuntu machine at home while in the office. This just worked. After upgrading to 10.10, I no longer can connect. Errormessage: Failed to connect to server (my ip) Looked at remote desktop settings, but these are not changed. Port forwarding is working and I use an internal fixed ip, so I can't imagine this being a problem (I doublechecked it anyway!). Anyone seen similar behavior> And, more interestingly, anyone know of a way to fix this?
View 4 Replies
View Related
Jun 2, 2011
I'm having an issue where a server in CA (1000/full) and in VA (100/full) have very lopsided data transfer.
CA -> VA with iperf shows ~20Mbps
VA -> CA with iperf shows ~93Mbps
If we change the CA server to 100/FULL, transfer speed is 93Mbps both ways.
Some tuning was done to TCP window scaling parameters, but it won't correct the issue, just improve the CA -> VA numbers to what is listed above. I will say, turning TCP window scaling OFF will lower the transfer speed both ways to < 20Mbps.
The only clue I have when looking at wireshark dumps is that the window scale going OUT would never go past 10240 (scale is 8, so 2^8 x 40bytes). In the opposite direction, the window size will go above 3MB (scaled).
It is not a bandwidth problem as iperf with UDP shows 93Mbps both ways. Local transfers (CA 1000/full to CA 100/full) show full speed both ways, so I feel it is strictly related to TCP window scaling.
RedHat 5 64-bit on both sides. Any ideas why it won't scale above 10240?
View 7 Replies
View Related
Jan 4, 2011
Does anyone know or recommend some software or a script to remotely power on a PC from standby to on, or even better from completely off?
I guess the completely OFF to ON is much more complicated - would probably require an extra piece of hardware(?)
View 2 Replies
View Related
Oct 4, 2010
I've read a number of web pages on this and scoured a few forums, but I can't seem to get it to work. Here's the low down so far [don't know if this matters] server has a bridge interface
Edited /etc/ssh/sshd_config
X11Forwarding yes
X11DisplayOffset 10[code].....
The full text of the error or warning message cannot be safely formatted in this environment. You may get a more descriptive message by running the program as a non-root user or by removing the suid bit on the executable.xterm Xt error: Can't open display:
View 5 Replies
View Related
Feb 10, 2011
I am access my linux box remotely using putty. I ran some build process on the remote machine. I lost my connection and now I had to re login using putty. I dont know if my process has finished or not. How will I check that.
View 2 Replies
View Related
Mar 23, 2011
I've seen other posts on this issue, but don't know if they were ever resolved. I've tried some of the suggestions but none seemed to apply.Flavor - 10.10 Issue - Access via VNC after reboot
All in all, I have had nothing but success with Ubuntu, being that I'm no to it, but knowing what I need, I can usually find the solution. My problem is accessing via VNC after a reboot. The issue is the keys (keyring)
Router is setup for SSH on 22 for PuTTY to work, 5900 for VNC to work. If I am at the machine and login, VNC is possible from outside. Should I be running a different server other than the Remote Desktop that is included?
Is there a way to login via SSH to unlock the GUI to allow VNC access? I would not even bother with GUI, but I'm not there yet with the CLI To all that have suggested I learn it, believe me I'm working on it. All of us out there that have the Swindows syndrome have an uphill battle. I can't be the only one up against this. If anyone who has serious skills could take 5 minutes and peek. I can't think of any other information that I could supply. If there is,
View 1 Replies
View Related
Apr 8, 2011
I am trying to transfer a file from my work Win7 computer, to my Ubuntu home server. I can SSH into my server using PuTTY with no problems. The "Access denied" occurs after I type my password of course.I just want to push a file from my Win7 machine to my Ubuntu using SSH and PuTTY. PuTTY is what I have loaded on my work machine.
View 3 Replies
View Related
Apr 4, 2010
I am trying to play my audio files at work from my home computer over ssh. The computer I use at work is windows and so I use Putty to make that connection. However when I mplayer file.mp3, the file starts to play, but I am assuming it's playing on my home computer.....so, I am wondering, how do I forward the audio to my remote computer?
and no, can't use a CD... I work in a car with no CD player, and the computer is a Panasonic Toughbook with no CD-ROM... options are limited.
View 5 Replies
View Related
Jan 18, 2011
I am using putty in my windows machine to access my Linux server terminal.
Code:
Putty works fine if I disable my Linux IPTABLES. My Windows machine IP is 192.168.1.249
Linux server IP address is 192.168.1.200 I don't know how to allow it through IPTABLES.The port which putty is using is 22.
View 3 Replies
View Related
Mar 13, 2009
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies
View Related
Jul 28, 2010
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
View 8 Replies
View Related
Jan 2, 2010
I am new to using Ubuntu but I have installed ubuntu karmic koala on my laptop and am dual booting ubuntu and xp on my desktop. I am wondering how I go about setting up putty so I can view my desktop from my laptop because I travel quite frequently.
View 2 Replies
View Related
Jan 15, 2011
I can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies
View Related
Feb 27, 2010
I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
View 2 Replies
View Related
Nov 3, 2010
i can start applications like Openoffice, firefox and other graphical app inside terminal on gnome.
View 3 Replies
View Related
Mar 22, 2010
i have ubuntu 10.04 lucid i used gnome-file-share-properties to enable remote desktop i have samba i have ping from remote computer to my ip address and computer name and etc but still i can't connect remotely via rdp or at least not via windows xp rdp what do i need to fix to enable this?
View 9 Replies
View Related
Mar 20, 2011
there is a way to set an ip address on a computer remotely. Here's my issue : Have a debian computer (plug computer) on which, after upgrade, i m not able to log in back anymore. At the moment it seems i have no chanche to connect something like a monitor but i m pretty sure the computer it boots up cause wireless is on and i can see ssid and mac address of the ap.
I ve tried to assign an ip to the mac address (from my laptop) by arp and in the table it shows the link between the mac and ip, but i m unable to ping the ip after that. I was trying to think of maybe set up a dhcp server from my laptop and see if the plugcomputer gets an ip automatically, but i m not sure if it is working and at the moment i have little experience on set up a dhcp server on linux (sabayon). Do you think is it possible to manage the network card of my plug computer by eth/wlan from my laptop?
View 3 Replies
View Related
Apr 12, 2011
I'm running Ubuntu server. To change the IP while I'm sitting in front of the computer, I would:
1. edit /etc/network/interfaces
2. ifdown eth0
3. ifup eth0
Remotely, I can do the first two no problem, but the ifup command causes some problems since the ethernet interface is no longer functioning. Is there some kind of script that can be written for this purpose? Maybe something that will check eth0 every so often and make sure it is running and bring it up if it isn't. Or else a script run with nohup?
I do not intend that changing the IP address will be a frequent occurrence, but when it needs to be done, it must be done reliably and without the possibility that the computer will no longer be reachable for more than a couple minutes or so.
View 3 Replies
View Related
