Ubuntu Networking :: Squid And Request From Internet?
Oct 9, 2010
I try use Squid as my proxy server. When I set my firefox to use my proxy server (squid), all is ok, but when I set firefox on another pc (from internet, not local network), all request returned time out turn off my router and connect PC to internet (without router), but still don't work.In iptables is all ok, I think. Where is problem? I think, It isn't problem with squid (because squid don't show error page), but I don't know how fix it
iptables:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Edit: SSH from remote pc work fine.
View 7 Replies
ADVERTISEMENT
Jun 25, 2010
how to redirect all client http request to https request in squid
View 1 Replies
View Related
Jan 10, 2011
Hi,
In squid i have blocked some sites like facebook and ......I want to know is there any way when user type in his browser like www.facebook.com instead it show something like following it automatically redirect to www.google.com
Error
The requested URL could not be retrieved
The following error was encountered:
Access Denied.
Basically I want to redirect the http request so the user should not see the page not found error but www.google.com page may open automatically.
thanks
garden
View 2 Replies
View Related
Feb 2, 2010
When I user wants to navigate through the internet, he must first give his username and password. The password is sent in clear text. I would like to encrypt this using SSL (or an other solution already integrated in Squid). Is this possible in Squid?I read that "user_cert" option can do this, but I couldn't configure it.I have: acl myacl user_cert src 192.168.1.5Which gives: "aclParseAclLine: Invalid ACL type 'user_cert'"The other solution is probably tunneling, but I don't want to install special software on the client machines
View 1 Replies
View Related
Feb 3, 2010
I have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 Replies
View Related
Jun 20, 2010
I'm looking for a way to tunnel the internet connection of my Ubuntu VPN server to the remote client.The server is running Ubuntu Server 9.04 64-bit, and has a fully functional installation of Poptop and Squid. Is there a way I can get internet requests from the VPN client to tunnel over the VPN and be connected through Squid? I'd think this would be a iptables thing, but I'm not sure.
View 5 Replies
View Related
Jan 14, 2011
is this possible on 2 Linux boxes will act as a INTERNET Firewall + Filtering: 1st PC = CENTOS 5.5 functions as a firewall using iptables with two NICS 1=ETH0 connected to internet with a public ip and 1=ETH1 with ip address of 10.0.0.1 connected to the 2nd PC Centos 5.5 with squid/dansguardian with ip address of 10.0.0.2
2nd PC = Centos 5.5 functions as a squid + dansguardian internet filtering with 2 NICS 1=ETH0 with ip address of 10.0.0.2 connected to the ETH1 of the 1st PC with ip address of 10.0.0.1 and 2nd ETH1=connected to LAN (172.16.1.0/24)
does this make sense? this might be confusing but I just want to try this, to protect incoming ssh from our previous Sys admins who intended to enter the LAN 172.16.1.0/24 network. And also to confuse them that they have to pass through 10.0.0.1 - 2.
View 3 Replies
View Related
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
View Related
Mar 22, 2010
My computer is recently asking for my 'default keyring password'to get access to the internet. It never used to do this as I am single user and never created a keyring password as far as I know. I dont even use a login password.Luckily i tried my administrator password and that unlocks my keyring but I would like to get it back to no password or auto unlock mode.
View 2 Replies
View Related
Jun 21, 2011
I got a request today from someone on the software development team that reads as follows: Quote: According to RFC 4409 client mail submission to an email server is supposed to use port 587. Server to server SMTP relays are to use port 25. When I am not on site, I can't email via my work account via my iPhone or my residential internet because my ISP(s) filter port 25 to only allow traffic to and from their mail servers. They do however allow 587 anywhere per RFC 4409. Just to send this email I am having to relay off my own server in California. get the proper ports opened on the mail server? [URL] So my question now is I'm wondering if my Postfix server isn't properly configured? Right now it's listening on the following ports:
[Code].....
View 1 Replies
View Related
Aug 2, 2010
I want filter some sites on my network by squid .
My Distribution is suse server 11 squid 2.7
View 2 Replies
View Related
Aug 24, 2009
I have one Squid server which was configured to share internet on our networks192.168.20.0) PCs Serrver:192.168.20.25:8080It is working smoothly.Now my problem is that I has to configure one sub server that should allow internet to our 192.168.22.0 network with 3128 port. The sub server will get the connection from main server and it share the inter net to the internal network.
View 3 Replies
View Related
Dec 30, 2010
I am using internet web control through squid... All is working fine only some little bit issues.
(1) Sometime when i tried to open google.com or any site I got message (The requested URL could not be retrieved) Screen Shot Attached.) but again after sometimes same websites will open.
url
(2) I would like to block word 'sex'.. So I have edit squid.conf with the following acl
acl Blockword url_regex sex
http_access deny Blockword
but problem occur in some websites where 'sensex' word found in url. Then squid block 'sensex' url content website also..
View 2 Replies
View Related
Apr 28, 2010
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies
View Related
Jul 24, 2010
I've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
View 1 Replies
View Related
Apr 4, 2010
Slow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
View 2 Replies
View Related
Jun 16, 2009
I have installed debian to run Squid cache as a caching proxy.
Ive been bashing away now for 2 days and i have managed to install squid (i first tried manually, but that did not work so i used synaptic software packager to install it (from Administration menu)
That went well, thereafter i installed webamin to work with squid in a GUI
I have managed to start squid and added my range of IP addresses to the ACL list
I have added the proxy restriction too.
Now, i tried to test it.
I opened Iceweasel Web browser (on the same machine) and setit to use the Proxy server: localhost and port:3128
That works fine.
But when i try to change the proxy setting to my machines ip (where squid is installed) :
Proxy server: 10.0.0.35 and port:3128
That does not work.
Am i missing something, please help
I then tried to set another windows PC on the network to:
Proxy server: 10.0.0.35 and port:3128
That also does not work.
I also edited the conf file to http_access allow all, but i do not know if i have doen it correctly, but maybe there is another problem?
View 1 Replies
View Related
Jan 2, 2010
I have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?
View 2 Replies
View Related
May 31, 2011
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
View 3 Replies
View Related
Nov 6, 2010
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
View 3 Replies
View Related
Feb 10, 2011
For the past three days I have been trying to install a mail server on my Request Tracker server and everything that I have tried either failed or didn't work at all. I am running Ubutnu 10.10 server and I am making this request tacker as a senior project and this server is ideally going to be the Ticketing system for my school but I can't seem to figure out how to install a Mail sever?
View 2 Replies
View Related
Feb 14, 2011
Hi
I want to send non get request for HTTP from linux server.
Please let me knwo how to do that
Thanks
Lakshmikant
View 1 Replies
View Related
Nov 9, 2010
I use slackware current, and curl and wget give the following errors:
Code:
repo@cannabis ~]$ wget -r http://users.telenet.be/reggersjans
--2010-11-09 13:48:14-- http://users.telenet.be/reggersjans
Resolving users.telenet.be (users.telenet.be)... ::ffff:74.117.221.11, 74.117.221.11
Connecting to users.telenet.be (users.telenet.be)|::ffff:74.117.221.11|:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
[Code]...
View 7 Replies
View Related
May 18, 2009
I am running a 2 NIC system with the routing table for eth0 allows user access to the internet,etc. and eth1 routes to another private network (192.168.x.x). eth1 is configured to handle DHCP requests.When a device connected via eth1 boots, it requests an IP from the DHCP server. Using tcpdump, eth1 is receiving the request but is not offering a lease.dhcp.conf seems to be configuring the DHCP service correctly. and dhcpd is running.The host is running Red Hat Enterprise Linux (Server Edition) 5.1. Perhaps I need to modify fire-wall rules (or disable them on eth1 altogether)?
View 2 Replies
View Related
Feb 26, 2009
hi
i want to redirect the packet to proxy server. can u help me.
Present network.
MY internal network ==> switch ==> proxyserver ==> router ==> internet.
(for internet i use
to connect proxy, in web browser==> lan settings ==> proxy server ip address )
What i want is
My internal network ==> getway or firewall ==> switch ==> proxy server ==> router==> internet. ( where this getway or firewall i can configure for forward http request to proxy server.)
so that i can separate my internal network from intranet but able to access the internet.
help me out
raghu
View 2 Replies
View Related
Apr 26, 2010
Google is full of users which cannot get a DHCP address So no matter what search term I use, I only see solutions which do not apply to this problem. I am running Debian Squeeze on a netbook eeePC 1001P I have a wireless interface and a wired interface defined in /etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
[code]....
Both interfaces WORK! When I have plugged in a cable, eth0 acquires and gets an IP, when I am in reach of the WiFi, wlan0 gets an IP address. Now when I want to use only wireless, and I have no LAN connected, this is what happens at boot:
Code:
ADDRCONF(NETDEV_UP): eth0: link is not ready
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
[code]....
This is fine, however it takes forever (I think 60 seconds) before DHCP decides to time out. That is awkward. This is my wife's computer and I cannot tell her to intervene manually when she is either in Wifi range or on the LAN. Why is dhclient called when it is detected that eth0 is not ready? How can I disable acquiring a DHCP address on an interface which is not ready? when a link is not ready, acquiring a DHCP address is skipped. How can I configure that? I have looked thru the ifup scripts, but nothing. Where do I see what is happening when the interface is auto eth0?
View 3 Replies
View Related
Jul 31, 2010
I am using Kubuntu 10.04, but I am posting here because the Kubuntu forums seems to be user agnostic. I just couldn't get past the verificaiton process. This should be a general networking problem that Ubuntu users can answer. On my home network, I have a Windows machine whose shared folders I can access from one machine running Ubuntu 9.04. I've had to do no network configuration on Ubuntu, it just works out of the box. On Windows I do not have a password that I use to login. Ubuntu does not ask for it either.
But on Kubuntu, when I browse the network samba shares, I can see my Windows share, open it, navigate it, but every time I cd into another level in the share or click on a file (say a music file to play), the authentication window pops up asking for a user name and password. What login information should I use here? I tried my Windows user name and a blank password,
View 8 Replies
View Related
Dec 25, 2010
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
View 7 Replies
View Related
Feb 8, 2011
Why firewalls does not allow ICMP echo request packets. Why are pings not allowed to certain systems?
View 1 Replies
View Related
Sep 14, 2010
haow can I parametrize the time of answer of a snmp request?
View 3 Replies
View Related
