I have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 RepliesI have a question, regarding the use of two internet connection on the same server. So, the thing is like this: The server will have 3 network adapters: connected to a DSL modem (on this adapter I have one of the internet connections, a PPPoE connection. It's only purpose is to share the internet connection to all LAN users using SNAT.
eth1 ----> the other internet connection, a much more expensive one actually, used for hosting a website, a domain name server, and a qmail server. eth2 ----> LAN connection So what I want is to make eth1 the "default gateway" (for outgoing mail, DNS requests, etc) and, as I said, use the ppp0 connection on eth0 only for internet sharing in LAN.
My question is (since I'l configure this server in about one week), does anybody have any suggestions regarding how could I accomplish this? I mean, I'm affraid that ppp0 will also try to use the default gateway from the other internet connection and vice-versa. Now, I know I can use the ip route/ip rule commands, but for many reasons I'd like to keep it simple and not use them.
Can I bind 2 interent connections or more on same fedora server to create bigger one with double bandwidth ,or it needs a specific router to be able to do this.
View 1 Replies View Relatedi have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
I want filter some sites on my network by squid .
My Distribution is suse server 11 squid 2.7
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI've got a Ubuntu Server Linux router that I've got 2 internet connections hooked to. One of them is DSL and the other is cable.
What I'd like to do is have everything go through the DSL connection EXCEPT for one desktop, I'd like that system to go through cable for everything.
Here's a diagram of how I've got things set up.
[URL]
I don't have any more expansion slots on the mainboard of my server for another NIC, also I do a lot of file transferring between a laptop and the desktop I want on the cable connection so I don't want that slowing down the rest of my network.
I've got both providers set up in the providers file and I've got everything going through the DSL connection right now. So far everything I've tried has stopped the desktop from connecting out at all.
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies View RelatedI've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
I have two internet connections. One is wired ADSL Broadband & another is USB EVDO modem. I can use only one source at a time. That means the traffic will pass through either ADSL or EVDO. Other connection just sits idle. I want to use both the connections together so that I will have increased bandwidth. Is there a way to do that?
My computer has one NIC card. Both ADSL & EVDO use dynamic IPs.
I have the latest Ubuntu (9.10) desktop. My 2 cards are:
WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.
I am a user of Ubuntu 10.04 and I use Firestarter because it lets me know which IPs I am connected to, which ports are used, and which applications are using those ports. The problem is that I can't use Firestarter with my non-sudo account (well, I know that I can change my system settings to do that, but I'd rahther not do it).
So the question is: Is there any application that lets the user monitor the internet connection?
I have a firewall ( a pc with debian 5) with 2 internet connections. each connected to a ethernet card (the firewall has 2 ethernet pci cards so it has one connection per card)how can i balance the internet requests from my LAN using this 2 connections?
View 3 Replies View RelatedOn my server I some times login from my home where I have an internet connection which does not have a static IP each time I switch on my modem a dynamic IP isgenerated.I see in auth.log logs of following lines Quote:reverse mapping checking getaddrinfo forkkts-kk-dynamic-01.1.168.192.some_broadband.in [192.168.1.2] failed - POSSIBLE BREAK-IN ATTEMPT Accepted publickey for root from 192.168.1.2 port 22852 ssh2when ever I login to my server from home.In this case I do know that it was me who logged in but still why do I see such a log.What is this complaining about?
View 11 Replies View RelatedWhile using Ubuntu two other computers lose their connection. One (main) is connected to the modem, other from the switch to the wireless router, and the one with ubuntu wired via switch. Currently connected with Windows 7, other two are connected. Once booted into Ubuntu rest of the computers disconnect?
View 6 Replies View RelatedI Installed Ubuntu which was on the laptop before and this install doesn't want to work with a Internet connection. I know my connections is good and the Laptop is fine because it used to have dual boot and windows connected fine.
View 2 Replies View RelatedI'm trying to set up an openVPN server for a small office. I've gotten the server running, and configured keys, and been able to connect to the server. The trouble is that once I connect with my windows machine to the server, I am unable to bridge through to the www. I have combed through so many settings and tutorials, and I am confused as to how to set up the interfaces configuration file. Here's a sample of my routing table:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0
XXX.XXX.XXX.0 * 255.255.255.128 U 0 0 0 eth0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
default XXX.XXX.XXX.1 0.0.0.0 UG 100 0 0 eth0
How should I be configuring this so that when I'm in the VPN I can get through to the internet?
I have seen several threads lately about slow internet connections here and elsewhere, but I haven't seen anyone post a reply about blacklisting ipv6 so I am curious as to why?Is ipv6 enabled only on certain distro's or is there some other reason that it's not mentioned?
<If anyone wants to try it, to see if it would work for them>
On Slackware 12.2 and Salix 13.0 just add "blacklist ipv6" to the /etc/modprobe.d/blacklist file. I'm not sure about non-slackware based distro's. Unfortunately, I don't know any way of doing it without rebooting.
Slow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
View 2 Replies View RelatedI try use Squid as my proxy server. When I set my firefox to use my proxy server (squid), all is ok, but when I set firefox on another pc (from internet, not local network), all request returned time out turn off my router and connect PC to internet (without router), but still don't work.In iptables is all ok, I think. Where is problem? I think, It isn't problem with squid (because squid don't show error page), but I don't know how fix it
iptables:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Edit: SSH from remote pc work fine.
I'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.
The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...
Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...
And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites
Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?
I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies View RelatedI have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?
I'm looking for a way to tunnel the internet connection of my Ubuntu VPN server to the remote client.The server is running Ubuntu Server 9.04 64-bit, and has a fully functional installation of Poptop and Squid. Is there a way I can get internet requests from the VPN client to tunnel over the VPN and be connected through Squid? I'd think this would be a iptables thing, but I'm not sure.
View 5 Replies View RelatedMy problem is that I would like to load balance or aggregate 2 separate Internet connections on my laptop. Currently a hard line ISP is not available so I'm using an Sierra Wireless 885 USB air card. Thing is the card is quite slow. I also can tether an iPhone to the laptop. The ideal solution would be to have both connections being utilized to help speed up the overall experience, even if it is only a modest gain in speed.
as I do not know much about iptables and basic TCP/IP routing, I'm finding it difficult to implement those solutions. If someone can point me in the right direction ( a slightly dumb down how:to? or better explained? )
BTW, both phone and aircard get dynamic IP's. Running Ubuntu 10.4
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
is this possible on 2 Linux boxes will act as a INTERNET Firewall + Filtering: 1st PC = CENTOS 5.5 functions as a firewall using iptables with two NICS 1=ETH0 connected to internet with a public ip and 1=ETH1 with ip address of 10.0.0.1 connected to the 2nd PC Centos 5.5 with squid/dansguardian with ip address of 10.0.0.2
2nd PC = Centos 5.5 functions as a squid + dansguardian internet filtering with 2 NICS 1=ETH0 with ip address of 10.0.0.2 connected to the ETH1 of the 1st PC with ip address of 10.0.0.1 and 2nd ETH1=connected to LAN (172.16.1.0/24)
does this make sense? this might be confusing but I just want to try this, to protect incoming ssh from our previous Sys admins who intended to enter the LAN 172.16.1.0/24 network. And also to confuse them that they have to pass through 10.0.0.1 - 2.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI have 10 systems on my network and I have centos5.5 installed on server. All other clients are on WinXP. I am using squid server to share internet on my network.Problem is: whenever an user trying to open a website through squid server, it opens too slow, but if same user tries to open same website by passing squid server, it opens 3 times faster. Downloading speed is same in both scenario. Only buffering speed is slow through squid.
View 1 Replies View Related