Networking :: Squid With Iptables - Make Clients To Browse Internet Only From Proxy Server?
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
ADVERTISEMENT
Nov 10, 2010
I need to set up an ip table and a transparent squid proxy as followed: I have 3 machine: Machine 1 works as a squid proxy. It has 2 interface eth1 and eth2.
eth1: 192.168.99.2 (Connect to eth1 of machine 2)
eth2: 192.168.98.2 (Connect to eth1 of machine 3)
machine 2 works as a webserver
eth1: 192.168.99.4
machine 3 works as a web client.
eth1: 192.168.98.4
my responsibility is to send all tcp traffic from machine 3 at port 80 to my squid proxy. In order to fulfill the tasks, I have edited the squid.conf as followed: Code: http_access allow localnet http_access allow localhost and in machine 1, I tried 2 ip tables command: Code: iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 80 -j DNAT --to 192.168.99.2:80 iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 80 I don't know if it is right or wrong.
View 7 Replies
View Related
Jan 12, 2011
I setup squid with transparent proxy and its working, however, when I reboot the server, the proxy server doesnt work unless I run the following.
Code: # squid server IP
SQUID_SERVER="192.168.1.1"
# Interface connected to Internet
INTERNET="eth0"
# Interface connected to LAN
LAN_IN="eth1"
# Squid port
SQUID_PORT="3128"
[Code]...
View 6 Replies
View Related
Dec 9, 2010
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
View 2 Replies
View Related
Apr 28, 2010
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies
View Related
May 18, 2010
I have installed squid server.. but how can i make tranceparrent proxy?
View 1 Replies
View Related
Dec 22, 2010
I want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies
View Related
Jan 2, 2010
I have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?
View 2 Replies
View Related
Jul 27, 2011
I have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
View 2 Replies
View Related
Nov 6, 2010
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
View 3 Replies
View Related
Jan 14, 2011
is this possible on 2 Linux boxes will act as a INTERNET Firewall + Filtering: 1st PC = CENTOS 5.5 functions as a firewall using iptables with two NICS 1=ETH0 connected to internet with a public ip and 1=ETH1 with ip address of 10.0.0.1 connected to the 2nd PC Centos 5.5 with squid/dansguardian with ip address of 10.0.0.2
2nd PC = Centos 5.5 functions as a squid + dansguardian internet filtering with 2 NICS 1=ETH0 with ip address of 10.0.0.2 connected to the ETH1 of the 1st PC with ip address of 10.0.0.1 and 2nd ETH1=connected to LAN (172.16.1.0/24)
does this make sense? this might be confusing but I just want to try this, to protect incoming ssh from our previous Sys admins who intended to enter the LAN 172.16.1.0/24 network. And also to confuse them that they have to pass through 10.0.0.1 - 2.
View 3 Replies
View Related
Aug 23, 2010
I just finished setup a proxy machine that runs in a separate box from gw.
I have the following iptables rule
on squid box
Code:
Code:
Here's an example
Code:
My question is how can i modify the iptables rules so it will forward the real ip's where the requests are originated from.
View 1 Replies
View Related
Dec 17, 2009
We have two offices suppose A and B. At office A, we use centos 5.3 computer as router and squid proxy server. At office B we use a cisco router to connect to Internet. Computers at office A that has direct access to Internet can access computers behind cisco router at office B using vnc viewer. But computers at office A that can use internet only through squid proxy can't access computers behind cisco router at office B. Is there any way so that I could allow squid clients to access computer behind cisco router at office B using vnc viewer.
View 3 Replies
View Related
Mar 16, 2010
How to configure SQUID proxy server in ubuntu 9.10 ?
View 7 Replies
View Related
Mar 16, 2010
how-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies
View Related
May 4, 2010
I'd like to use ssh as a proxy/socks server and redirect all connections through this proxy.
It would look like : ssh -D 123 -N host
iptables ...
I've never used iptables before and I did not manage to find any useful for this particular case solutions on the internet.
So, what's the good way to do that ?
View 1 Replies
View Related
Jan 17, 2011
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies
View Related
Aug 12, 2009
How To: Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server I have 3 WANs connection (2 ADSL and 1 Wimax). And 30 clients on LAN.
eth0 connect with Wimax
ip= 172.23.x.x
eth1 connect with ADSL1
ip=10.10.6.x
eth2 connect with ADSL2
ip= 10.10.5.x
eth3 connect with LAN
ip=192.168.1.x
how to do Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server.
View 1 Replies
View Related
May 20, 2009
I'm using Fedora Core5.0 I have using Iptables for forward port 80 to port 3128(Squid) in the same of server.I need to forward using Iptables to use the other proxy server because this server i am use for vpn and mail tranfer.What a Commnand for i use?ase 1. Server 1 >Ip 192.168.0.4 SQUID WITH PORT(3128)2. Server 2 IP 192.168.0.254 PF SENSE (3128) I will use server 2 for using internet connect only.
View 1 Replies
View Related
Feb 2, 2011
I want to restrict some site (Social Networking) through my newly configured squid proxy. But It always allow those site How to block those site. My squid.conf file is configured as follow :-
#Recommended minimum configuration:
acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
[coder].....
View 14 Replies
View Related
Mar 25, 2010
I am new to iptables. We have two Squid proxy servers running in "non-transparent mode" (172.16.0.1 and 172.16.0.2). Currently users have to configure the proxy server they want to use by configuring them in their browsers. Recently I saw an example for redirecting web traffic to a single transparent proxy server.
-A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128
-A PREROUTING -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 3128
Can anyone modify this rule to accommodate my current setup of two proxy servers running in non-transparent mode. i.e Redirect web traffic to the 172.16.0.1-172.16.0.2 ip range.
View 2 Replies
View Related
Feb 23, 2011
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
View 4 Replies
View Related
May 21, 2011
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
View 1 Replies
View Related
Apr 26, 2011
How to make squid proxy transparent?I have configured a Squid proxy server with some ACLs but we have to check from client side whether those ACLs work or not ,I have to open their firefox and manually enter my machine's i.e. proxy server's ip, only after entering this ip , Those ACLs work properly.But now I want to make it work without manually entering the proxy on clients machine.I guess transparent proxy is the solution, but how to configure it/Please guide me and I am one of the machine in LAN.
View 1 Replies
View Related
Apr 26, 2011
http_port 3128 transparent --> What does this mean? Is this a only thing we do to make Squid Proxy Transparent?
View 2 Replies
View Related
Jan 7, 2010
i have successfully setup PPTPD on my server and I can open a VPN tunnel but my clients can only ping the server's IP, they don't have access to the internet through the VPN.
i have searched different forums and understand that I have to create a route on the server to route packets between the VPN interface and my internet gateway, but I didn't manage to get this work.
here is what my setup looks like:
Code:
root@r31495:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:c0:c7:13:35
inet addr:94.23.197.XX Bcast:94.23.197.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 9 Replies
View Related
Jan 30, 2010
I'm trying to give some windows users a permanent connection to a samba share behind a firewall over the public Internet. I know I can give them access with something like winscp (which they have done) but really I'd like to do it with a VPN so it seems seamless to the user. However I have no idea how to set up the server to support this and am finding the documentation a bit confusing. The samba share is on a Debian box and the firwewall is a Linksys WRT54GL.
View 1 Replies
View Related
Apr 7, 2011
I have been working in Linux for the past two years.And working in squid for the past 6 months.The following is my Setup
ETH1 - ISP1 (Active)
ETH2 - LAN (Active)
ETH3 - ISP2 (Inactive)
Using Iptables I forward 80 port through squid (3128).Other ports just get connected in the proxy machine itself since it has IP_FORWARD enabled. All my client machines browsers enabled with "Use proxy 3128". I just want to make all the port to pass through squid server.
View 1 Replies
View Related
Feb 3, 2010
I have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 Replies
View Related
Oct 18, 2009
How will I allocate specific bandwidth to clients using squid? I use squid on RHEL5 serer ...
View 1 Replies
View Related
