Ubuntu Servers :: 10.04 After Upgrade SAMBA Not Working?
Oct 10, 2010
I had a working server 9.04 on my network and I could access shares via Samba and MacFusion from Windows, ubutu and mac boxes. After the upgrade I can not access shares via Samba, I can ssh in it just fine (no change there) also Macfusion mounts the paths just fine.
Anybody had this problem with the upgrade? It must be samba everything else is working (also I can't access any files from my Ubuntu Laptop running 10.10 Desktop edition)
Here is my smb.conf file:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = yes
; wins server = w.x.y.z
dns proxy = no
[Code]...
View 9 Replies
ADVERTISEMENT
Apr 23, 2010
I upgraded Samba to 3.5.2 to enable Windows 7 to log in to the PDC. ACL was working with the Samba 3.0.28a that came with 8.04LTS. After upgrade I can now log in to the domain with Win 7 but ACL permissions are not working on Win7, XP or anything. They still show on the server but any attempt to change permissions on the workstation fails with "Access is Denied" and only user/group/other permissions are doing anything. Anyone know what changes for the ACL were made between the two versions? I know they're working on switching to VFS modules but setting "vfs objects = acl_xattr"
View 1 Replies
View Related
Jul 12, 2010
I have a LAN with a number of computers including an iMac and a PC dual booting with 10.04.
I recently did an upgrade to 10.04 from 9.10 on both computers.
Under 9.10 I could easily browse either computer using Samba.
Now under 10.04 Samba just does not want to work and won't connect from either computer to the other.
View 2 Replies
View Related
Nov 25, 2009
Automatic upgrade ver 10 to 11 Have a large drive that is shared over Windows domain.This was renamed from /media/drive/ to /media/7534179143A7E34 All the users in Windows domain can not access the files or folders on the Fedora server - Samba setup. Why was the deive renamed and is this causing problems. I reshared the folders on the drive but still cannot access the drive. Where do I start to fault find please.
View 2 Replies
View Related
Jan 12, 2010
Last night i updated to 9.10, all good except i can no longer access my samba shares!!
here is the info from log.smbd after i stared it this afternoon
Code:
smbd version 3.4.0 started.
Copyright Andrew Tridgell and the Samba Team 1992-2009
[2010/01/12 16:35:57, 1] param/loadparm.c:6355(map_parameter)
Unknown parameter encountered: "executable"
[2010/01/12 16:35:57, 0] param/loadparm.c:7449(lp_do_parameter)
[Code]....
View 6 Replies
View Related
Mar 14, 2010
I have a file server running samba 3.4.0. I just upgraded ubuntu to 9.10. The upgrade was unfortunately stopped in the middle, but I think I managed to complete it.The problem is that now samba will not work after a reboot. The daemons are running, but any attempt to connect from a windows machine fails (Windows 7: the network path was not found). Manually restarting the service fixes the problem, but I need a more stable solution!Interestingly, I can ssh to the machine, or rdp to a virtual machine running on it.The logs don't seem to report any error:
Code:
stefano@SERVER02:/var/log/samba$ tail log.smbd
[2010/03/14 04:02:11, 0] smbd/server.c:1068(main)
[code]....
View 5 Replies
View Related
May 27, 2010
provide support for a small business that uses Windows machines to access files stored on an Ubuntu server which has just been upgraded from 8.04 to 10.04 (32 bit version). Before the upgrade the users accessed their share by this batch file:
Code:
net use x: \servernamesharename /user:username
This would then prompt the user for his or her password which they would enter to allow them access to the share.Since upgrading to 10.04, the user gets a "system error 58" stating "The specified server cannot perform the requested operation"If the batch file command is changed to:
Code:
net use x: \servernamesharename
The same error message is given. The only work around I have found is to modify the file to read:
Code:
net use x: \servernamesharename /user:username password
This is not ideal at all as it makes the password protection useless.When I performed the upgrade I left the smb.conf unchanged. The smb.conf file is:
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[code]...
View 7 Replies
View Related
Jul 17, 2011
I just upgraded to 10.04, as of this upgrade, samba has quit working.
From Windows I can ping the linux box (192.168.1.110) If from Windows I key in ->Start->Run->\192.168.1.110 I connect to my linux box.
If I try to access the linux box through the name, (\tardis) I get network path not found.
Everything worked fine before the upgrade, now I cannot see my linux box via its network name. I have a WD TV Live on my network and I must be able to see the linux box via its network name or I cannot connect to it.
iptables shows no rules
smbtree returns
SONCOM
\WINDOZE
\WDTVLIVE WDTV LIVE
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
[Code]....
View 9 Replies
View Related
Jun 25, 2010
Code:
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
[code]...
View 5 Replies
View Related
Sep 13, 2010
I run Samba version 3.4.7 as a Domain server for our company, and recently we reorganized our IP-addresses. And the Samba server also got a new IP-address. (192.168.1.60 -> 192.168.1.22). However, now new computers can not join the domain, and old ones can not connect to it correctly (they get a temp profile).
Windows XP gets a temp profile when connecting, and when trying to join a domain I get this error "A domain controller for the domain HAWAR3 could not be contacted. Ensure that the domain name is typed correctly. If the name is correct click Details for troubleshooting".
When trying to connect Windows2008R2 (already a member) it says:
"There are currently no logon servers available to service the logon request."
My guess is that is is some problem with WINS or something.
View 2 Replies
View Related
Mar 8, 2009
I've read through these pages [URL] but can't seem to get Samba server working. I am using Gnome and I go to System - Administration - Services
In there I can see smb and nmb. Both are enabled, but both have a status of unknown. I can't seem to start or stop either of them. I can just enable or disable them. I've tried using the gui, as well as command line.
I'd really like to get this going as I'd like to copy files from my XP Pro box to my Linux box (F9). I have WinSCP, but am having permission issues and I can only copy to a folder on my desktop on the Linux box (I'd like to get this fixed too, but that's a different thread at a later time)
View 10 Replies
View Related
Apr 8, 2009
I've been running a F10 based Samba Server a few months without trouble. Now, after an update, samba is not working any more. When I try to start it manually, it reports the following error:
[root@hawkeye ~]# /etc/rc.d/init.d/smb start
Starting SMB services: /bin/bash: line 1: 3403 Aborted (core dumped) smbd -D [FAILED]
[root@hawkeye ~]#
I've re/installed all samba packages and configure the smb server again from scratch but the problem was not solved. My samba packages are:
[root@hawkeye samba]# rpm -q --all | grep samba
samba-winbind-3.2.8-0.27.fc10.i386
samba-client-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
[Code]....
View 8 Replies
View Related
Jul 22, 2011
[Code]...
I think I can eliminate Media Companion as the problem since all other samba servers work with it.
I want to trouble shoot this but don't even know where to start. How do I figure out what makes OPENWRT samba server different from the other 100% working FREENAS and PC-01 Servers?
How would you go about trouble shooting this?
View 1 Replies
View Related
Apr 6, 2010
I upgrade one of my servers from 8.04 to 9.04 and now libvirt is not working anymore.
The funny part is that the virtual machines are working perfectly because I can access them via ssh/ftp/etc.
I just can't access the libvirt interface. For example, if I issued (as root):
virsh -c qemu://system
I halts with Connecting to uri: qemu:///system error: failed to connect to the hypervisor
Is there a trace/debug that I can verify ?
View 1 Replies
View Related
May 7, 2010
Code:
* Starting ClamAV daemon clamd
WARNING: Ignoring deprecated option MailFollowURLs at line 33
ERROR: Can't initialize the internal logger
ERROR: Can't open /var/log/clamav/clamav.log in append mode (check permissions!).
...fail!
[Code]...
View 5 Replies
View Related
Jul 27, 2010
I have a server that started out at 8.04 LTS was upgraded to 8.10 and to 9.04. When I upgraded to 9.04 sudo and ssh stopped working.
Fortunately I have a root account and can login as root or su to root.
I suspect this is the result of changes I made to nsswitch.conf and pam.conf to get winbind working.
I was hoping for a fix by upgrading to 9.10, but that didn't work. I want to upgrade to 10.04 LTS, and stay there but I think need to resolve this first.
auth.log reports failed password for ssh attempts and authentication failed for sudo. I am at a loss to determine where the problem is and how to track it down.
View 3 Replies
View Related
Nov 19, 2010
I had sybase server running on my desktop but after the upgrade it does not seam to start properly. tried to restart the server many times but does not seam to help
The logs are displaying as below
00:00000:00001:2010/11/19 13:53:08.21 server Recovery complete.
00:00000:00010:2010/11/19 13:53:08.26 kernel Initializing Job Scheduler Task
00:00000:00010:2010/11/19 13:53:08.39 kernel Installed Job Scheduler sequencer code version 0.27 - 27 tokens
[Code]....
View 1 Replies
View Related
May 7, 2010
Any changes in the way httpd.conf works in 9.04Yesterday I updated from 8.04 to 8.10 and then to 9.04. All works fine, except for Apache Virtual sites.I had several defined in my httpd.conf file, which I used for testing clients' websites.ince the upgrade the virtual sites are not recognised, and all access is done at the original level /var/wwwAny changes in the way httpd.conf works? checked the Apache docs, but found nothing.Here's the httpd.conf I've been using:
<Directory /var/www/clientname/htdocs/products>
AllowOverride All
</Directory>
[code]....
View 4 Replies
View Related
Apr 29, 2010
installed the 9.10 Version of ubuntu. Now the situation is: Four Computers are running under Windos XP-professional SP3 My computer, the fifth has ubuntu as os After the upgrade to ubunto 9.10 (with the newest updates installed today) I`m unable to access the windows network. Shows me only windows network but when I click on it no list of workgroup is shown and therfore the network cannot be connected
Only with one "trick" get access: connect to server, then putting the ip's of th windows computers I've got connection to all allowed dir of all the four windows computers (location: smb://ip-adress) To install a network printer is impossible neither with cups nor with system-> adaministration->print At my computer is one printer which works fine. the other printer a Xerox Phaser 6110 is connectet to one XP computer and is configured as network printer under Windows. The computer (IP-Adress is found but that is all) Printer is not connected.
Trying now for three days I'm really upset because there is one golden rule: Never touch running Systems! But you folks from ubuntu must bring ever second day some updates. Nothing against this, but configure your updates in that manner that the updates don't change all my settings. When I boot my computer with windows-XP all network computers are there and usable. My Samba config is ok too because otherwise I would not be able to connect to windows computer through the above mentioned trick.
View 6 Replies
View Related
Mar 18, 2010
I wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
View 1 Replies
View Related
Nov 26, 2010
this is my output when I try to compile samba 4.0.0 alpha 7 in Ubuntu using the spec file provided in the samba packages:
bin/mergedobj/samba-util.o: In function `file_lines_parse':
(.text+0x595c): undefined reference to `_talloc_steal'
bin/mergedobj/samba-util.o: In function `data_blob_talloc_named':[code]....
View 1 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Mar 25, 2010
I want to upgrade my current samba 3.4 version to 3.5. I try my best to search on other linux forum but not get simple steps solution of upgrading samba version..
View 3 Replies
View Related
Dec 17, 2010
i am running centOS 5.5 with samba 3.3.8 I have enabled wins to see if i can get my windows workstation to be able to browse for the samba server and also be able to ping by hostname. I don't know if i have missed something in the config but I was going to upgrade to see if its an issue with 3.3.8.
if an upgrade is the solution can someone give me a how to on the upgrade. I used yum install samba3 to install it and found a how to to install 3.5 but the how to said i need to in all them ./configure command as the original install and it should install over 3.3.8. I don't know how to find that because i used yum.
View 2 Replies
View Related
Jan 11, 2010
We got windows 7 machines in our network so not able to joint them into samba domain. please guide me step by step how to upgrade samba 3.0 to 3.3.
View 2 Replies
View Related
May 4, 2010
I upgraded the samba on Ubuntu Server 8.04 to 3.5.2 so Windows 7 would be able to log into the domain. Now Samba isn't using ACL permissions and I can't alter the ACL with the Windows security dialog. All the permissions still show correctly on the server. Did something change with Samba 3.5.2? How to get the ACL to work with Samba 3.4.3 or newer?
View 3 Replies
View Related
Mar 25, 2009
I have a perfectly functional Samba file and print server. I will be adding several Window 2008 servers to serve as terminal server hosts running in virtual machines. I would like to convert my Samba server to a PDC (Primary Domain Controller) for these terminal servers to use. And leave everyone else as a work group (the current situation). I'd like to
1) use /etc/password and /etc/samba/smbpasswd as the source of the user accounts
2) limit what users the terminal servers can see based on a particular group (/etc/group)
So far I have tried the example howto's on the samba site and wound up having to restore /etc/nsswitch.conf in rescue mode.
View 3 Replies
View Related
Feb 4, 2010
I recently got myself a new hard drive and I want to use it as my Samba share. I just want the hard drive itself to store the files.I know once I get it set up it should be easy to tell Samba that's where I want it to store and look for files.Problem is I need to make it so the computer can use the hard drive first. I have already installed the drive. I just don't know how to get Ubuntu to recognize the drive.I also need to create a partition that uses the whole drive and format it to ext3, then I need to mount it somewhere for Samba to use.This would be easy to do with Ubuntu desktop, but I am using Ubuntu server and I don't know how to do it. I have read that I will need to use fdisk, but the post wasn't to clear on what to do.
View 2 Replies
View Related
May 13, 2010
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
View 3 Replies
View Related
Feb 16, 2010
i have ubuntu server 8.04 witch preinstalled samba 3.0.28. I like to install from repositories samba 3.4.5.
View 3 Replies
View Related
