Fedora Networking :: FC12 Upgrade Cannot Connect To Samba?
Dec 11, 2009
I have just upgraded to FC 12 from FC 11 everything on FC 11 was fine, I has samba, openvpn, subversion, tinyproxy and apache all working fine. Friends could vpn in and do all the stuff they where allowed to do,
Now unfortunately I have this issue after upgrading to FC12, All the samba mounts have disappeared from all my friends computers, when I look at the log files I now see this;
smbd/server.c:457(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
View 1 Replies
ADVERTISEMENT
Dec 6, 2009
After upgrading to FC12 from FC10 the 3 samba shares on the box cannot be connected to from either Windows-7 or Windows Server 2003R2. Both were working with FC10 just fine.
It is local authentication to the box not LDAP etc. Files below and error msg:
attempting to connect to say \saturngeorgek gets an error in a windows popup with Unknown username or bad password yet I'm certain of the ID & password as I can ssh in with it from Windows-7
In 2003 I see "Multiple connections to the same server or shared resource by the same user using more than one name are not allowed disconnect all previous connections and tr again."
In neither case do I have any connections to the saturn server that I can see using net use from either box.
smb.conf
========
[global]
workgroup = netwrx1
server string = Saturn RHFC4 Linux Server
[Code].....
View 4 Replies
View Related
May 20, 2009
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
View 2 Replies
View Related
May 11, 2010
I was able to connect to my XP home machine from downstairs F12 machine with gnome. I also have laptop with F12 but with xfce windows manager, following the same instruction, (wireless work fine) I don't see the network icon in the file manager. Can someone let me know how to trouble shoot?
View 12 Replies
View Related
Feb 23, 2010
I install CentOS 5.4 on a customer's workstation. They out-of-date nature of Enterprise is not at all working out for him. Since Enterprise is essentially FC6, is it possible to just upgrade him to FC12, or am I looking at a wipe and reinstall?
View 7 Replies
View Related
Apr 21, 2010
Mozilla programs are not connecting to the network. All other networking programs are working: yum, wget, skype, opera, nslookup, etc. Firefox and Thunderbird are not able to connect to the network. What happened? My box was working fine earlier! All I can figure is something included in the yum update that I performed today.
View 2 Replies
View Related
Nov 28, 2009
I decided to upgrade finally. It didn't go smoothly and right now I'm not really sure what is going on. During the install when it was scanning my disks it threw a timeout error but continued anyway. I completed the install but one thing that seemed odd to me is that I wasn't asked about packages or anything and it never prompted me for any other CDs. I wasn't sure what was going on. I did a re-install but same results.
So I figured fine I'll just configure things myself. I went to mount my other partitions and was unable to. I'm not sure what was done but I've not been able to get to my old data. I'm not even sure where to start because things are so different. I ran fdisk -l and I see these devices:
/dev/sda
/dev/sdb
/dev/dm-0
/dev/dm-1
Under /dev/sda It shows /dev/sda1 but tells me that partition 1 does not end on cylinder boundary it then shows /dev/sda2. This has a System of Linux LVM. Same with my /dev/sdb1. I am guessing this is where my 2 old partitions went. I looked up LVM which I didn't know anything about before. Previously I was about to mount my partitions directly so I'm pretty sure they were not LVM. So somehow these got converted?
I don't know what /dev/dm-0 and /dev/dm-1 are but I do get errors on them:
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1 doesn't contain a valid partition table
Right now I'm trying to simply get to my data once again or determine if it's unrecoverable. At this point I'm at a loss as to how to proceed. I know I didn't tell the install to format anything other than the first partition. Oh and after the two Fedora installs I did take a peek at Unbuntu. I started that install and it told me that the partition I was installing on was too small. So I canceled it. It showed the other partitions but I could see no way to read them.
View 7 Replies
View Related
Dec 6, 2009
After upgrading from FC10 to FC12 here I notice I cannot login to the GUO console locally as root, yet this worked with FC10. Attached is my /etc/gdm/custom.conf settings and I've got the login for root set true whih is where it was and working prior to the upgrade.. Also I don't see the shutdown/restart options as before either:
[daemon]
AutomaticLoginEnable=false
AutomaticLogin=
TimedLoginEnable=false
TimedLogin=
[Code].....
View 4 Replies
View Related
Nov 23, 2009
Pulseaudio setup. My pulseaudio was working when I was using FC11 and it stops working after I upgrade to FC12 using preupgrade. The system sees audio device and alsa is working correctly. No audio at all (system audio and mplayer) from Pulseaudio. I am using the onboard Intel audio. The verify from the alsamixer that the volume is not muted. I also tries all the combination of profiles in the pavucontrol and in some of the profiles, I can see the output volume bar is moving, but still no sound
pulseaudio-0.9.19-2.fc12.x86_64
alsa-plugins-pulseaudio-1.0.21-2.fc12.x86_64
Attached is the pulseaudio log when playing video from mplayer.
View 14 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
May 26, 2010
Took an FC12 system to FC13 via 'preupgrade'There was a REALLY old version of gimp-print-cups in RPM, and the installer announced "a fatal error occurred". However, everything else seemed to download properly and I allowed the upgrader to reboot the system.
a) grub boots the kernel, then the kernel can't find root and panics. It does this because it can't root file system with root=UUID= kernel option. If I manually tweek the grub line to use root=/dev/sdx, kernel finds its root and boots up to the next problem.
b) GUI environment not launched. Init scripts die on "error loading modules.dep". Sure enough - one is not there. Ran "depmod" to generate it ,and rebooted. System reboots into GUI, where I login to find the next problem.
c) Evolution won't start. Reason turns out the evolution-data-server from FC12 is still present. Did a check on just how many other FC12 RPM's are present: 1100. Yeah - over 1000. About 850 of the FC12 RPM's also had FC13 replacements installed. Did an "rpm -e" on these. Also had to do some remove action on mkinitrd, nash, plymouth-scripts-0.8.0, and parted-1.9.0 as there are replacements for these utilities under different package names. That cleaned up the system some, to present me with the next problem.
d) yum package repository still linked into FC12. Removed fedora-release-12-2.noarch and then I could "yum install" evolution and a few other packages properly.
I've done one other FC12->FC13 upgrade today, and that went flawlessly. So, I think in general the upgrade works fine. It just looks like if preupgrade finds anything amiss, it doesn't take care of a lot of things and generally leaves you with an unbootable mess to clean up.
View 6 Replies
View Related
Jun 7, 2010
I had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although
Code:
joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)
View 10 Replies
View Related
Jan 12, 2010
Last night i updated to 9.10, all good except i can no longer access my samba shares!!
here is the info from log.smbd after i stared it this afternoon
Code:
smbd version 3.4.0 started.
Copyright Andrew Tridgell and the Samba Team 1992-2009
[2010/01/12 16:35:57, 1] param/loadparm.c:6355(map_parameter)
Unknown parameter encountered: "executable"
[2010/01/12 16:35:57, 0] param/loadparm.c:7449(lp_do_parameter)
[Code]....
View 6 Replies
View Related
Jan 23, 2010
After the Upgrade of my Fedora Insatallation (FC 10 => 12) I have some problems with Gnome and the Login via console. The system actually boots fine and all kind of services like Postfix, IMAP, Samba, SSHD, Apache, etc. are avialable normally.
If I try however to work directly on the server I only see the completed Fedora progress icon and not as hoped for, the Login to Gnome. Also the attempt to change to a plain console with ALT-CTRL-F1 fails.
Since actually everything seems to work quite fine, I am somewhat helpless, according to should I look for, to get Gnome and the Console Login working again.
View 8 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
May 31, 2011
I've been using fedora on my Lenovo R61i since I got it...I believe the first version I used on this laptop was f10. I always try to keep it on the latest distro and I also enjoy a clean install every year or so. One thing I was always impressed with was how quickly I could go from sleep to back up and online. So I decided it was time for a clean install this weekend to fedora 15. Now when I wake it up (open the lid), it takes over a minute for the wifi to connect again. This hasn't been the case for the last 4 distro's so I'm wondering what I can do to speed that process back up, is there a particular package I can downgrade or is this something on their radar already and I should just wait for an upgrade?
View 3 Replies
View Related
Jun 11, 2010
I just upgraded to Fedora 13 (from 10, using preupgrade), and I've gotten most things working again, but I'm still having trouble with the network.My wired connection (eth0) doesn't connect on boot (even though ONBOOT=yes in /usr/sysconfig/network-scripts/ifcfg-eth0).Because of that, I figured I'd just leave eth0 connected manually (with ifup eth0). However, I then found that if I try to connect to a VPN like this, the system reverts to the "stalling every time I try to connect to the internet" problem that I had earlier.
View 1 Replies
View Related
Mar 5, 2010
I installed Fedora Core 12 on a Dell Latitude 610 laptop. Networking isn't working. I tried to start networking with '/etc/rc.d/init.d network start': there were no errors or warning messages, but before and afterwards, I could not ping anything.
I tried to configure and start networking with system-config-network. The ethernet network card shows up, but the activate button is greyed out.
I can ping the loopback address 127.0.0.1 after I start networking with '/etc/rc.d/init.d network start' but I don't really know what that means.
lspci tells me that my network "card" is a "NexXtreme BCM5751 Gigabit Ethernet PCI Express".
I know the eternt cable is good because I used it on another machine.
View 3 Replies
View Related
Apr 18, 2010
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies
View Related
Sep 13, 2010
I've done all this config [URL] This config for the "foo" folder:
("pruebas" its a user)
Code:
[foo]
path = /home/pruebas
ready only = no
guest ok = yes
[code]....
I have the [HOME] code too, its everything fine with it, and I cant connect with another user ("alfredo") from Red Hat to Windows XP with no problem... but as soon as I double click in "foo" directory, appears this:
[URL]
Already tried to disconnect from windows the directories with "net use" but it doesn't work
View 2 Replies
View Related
Mar 4, 2010
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies
View Related
Nov 13, 2010
I have a server running Ubuntu Server 10.04 that is a VirtualBox/Samba/SSH server. I have port forwarding set up for ports 22 and 3389 (SSH and RDP) and I want to access the Samba share without opening any other ports. I can connect to it from my internal network, but I want to be able to access it from school. My best guess would be to tunnel the Samba port through SSH, but I don't know how. I will be connecting to it from Ubuntu 10.10 Desktop.
View 9 Replies
View Related
Jan 27, 2011
Here is what I am trying to do. I set up a Samba server on Ubuntu 10.10, which seems to be working (sort of).
I set it up using Webmin, which has always worked for me before.
I set up two shares, both of which are read/write and are allowing any hosts. And are set up using the default samba configuration that is provided by Webmin.
For privacy reasons I won't disclose the domains, but I will call them test.abc.com and xyz.com
I set up /media/mount as a share called [mount_a] and I also set up /media/mount_b as [mount_b]
The server's host name in my internal network is mount-box
I originally mapped it to a sub-domain of my domain abc.com via DNS, so that test.abc.com resolves to the IP address of my router; which has all the necesarry port forwarding set up.
In windows explorer in the remote location I tested it by using \test.abc.compoonani_a, this works fine and after a password prompt I can access my files. However, I do not want to use this domain name for this server, so I registered a new domain name and again via DNS mapped domain xyz.com to the IP address of my router.
Since setting up the new hostname, I cannot connect to it via Windows to access the samba share. It just won't work. When I try to connect the password prompt appears and I put in my credentials, when I submit it the window re-appears and it has appended the servername xyz.com before the username, so it reads \xyz.com<myusername>, but won't let me connect.
If I try again with the previous hostname test.abc.com, it works fine.
What am I doing wrong that it would let me connect with one hostname, and not another.
View 1 Replies
View Related
Jul 22, 2010
i just installed zenwalk on another computer in my house (experimenting with zencafe as well) and i also installed the source code of samba directly from the website (i saw that the smbclient command wasn't there when i first installed zenwalk) i have a samba server that has ubuntu as its operating system and i would like to connect my zenwalk system to the shares so i can access them from that computer
i heard that smbclient is the way to go when you do something like this so i tried it a few times and nothing worked ps i am using webmin to configure samba on my ubuntu platform
View 7 Replies
View Related
Jan 17, 2010
/sbin/lspci reports this: 01:00.0 Network controller: RaLink RT2800 802.11n PCI iwconfig reports nothing Network manager doesn't see it. The card works when I run it from Win 7. I tried rt2800 and rt2860. no results I am fairly new to Linux and I don't know all of the command line functions, How to get my wireless PCI card detected. After I installed the rt2860 driver, I didn't reboot. After rebooting, the card lit up and now I am functional. Woo Hoo.
View 1 Replies
View Related
Jun 11, 2010
"Dell 1525 WLAN PCIe card with11n mini-Card & external antenna" wireless card. It got recognized fine by FC12, but it was rather slow. I had read that life would be better in FC13 with the new kernel. After a long wait, I upgraded to FC13 yesterday.
It seems that the wireless is indeed faster. However, it it clearly a lot slower than under Windows 7 (it is a dual boot PC). My test is simply to play say Hulu in full screen: under Windows it looks fine, under FC13 it plays in slow motion.
View 7 Replies
View Related
Jul 17, 2010
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
View 2 Replies
View Related
Nov 14, 2010
I am trying to connect to my samba server with xubuntu, so far with no luck.
I am trying to use fusesmb and have been following these instructions:
[URL]
as well as these:
[URL]
and these
[URL]
the top ones say to use Applications - System - shared folders to setup smb client. Xubuntu maverick doesn't seem to have that menu point. So I copied the smb.conf from my desktop machine. libsmbclient is installed.
fuse as such seems to run since teh folder that i designated as mount point (~/Network) changes owner to root when i run fusesmb Network. But apart from that nothing happens.
View 1 Replies
View Related
Feb 13, 2011
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies
View Related
Jun 1, 2011
I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").
Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?
View 1 Replies
View Related
