Ubuntu Networking :: Realteck Drivers And 11.04 - WiFi Is Not Functioning?
May 15, 2011
I am having some issues and my fixes are not even close to functioning anymore.I originally downloaded this driver http:[url]... and, though I occasionally had to re- "make-install" it, it worked.Last night, I did the system updates Ubuntu suggested and this morning, my WiFi is not functioning .Here are the "common commands" and stuff I have used so far to try to debug the problem.
lspci: 1a/b/g Wireless LAN Controller (rev 20) 0c:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEE iwconfig: wlan0 IEEE 802.11bg ESSID:"***** ******" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff
I am slightly confused as to why my Wireless LAN Controller doesn't come up as my Realtek 8185, but I think that may be issue number 1. The next bit of confusion comes from the fact that wlan0 is shown as connected to the correct SSID, even showing a frequency, but is not, infact, sending or receiving from that source.As I have said before, I just really nee WiFi to work.I was having issues with my sound and graphics cards,so I ran the update manager, but I wasn't expecting it to break my drivers!It is also worth noting that I have actually tried to recompile my drivers and re-install them, they don't seem to be working, for some reason.
I was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
i just installed ubuntu studio but i don't think it includes wifi drivers by default.the laptop i am using has worked well using vanilla ubuntu 9.10 including WiFi.i just need to know what driver packages to install.
when i go into additional drivers, only two drivers pop up, both for my wireless card. however, i can only use the first one because if i try to use them both it breaks my wifi, forcing me to reinstall the first driver. ordinarily, this wouldnt bother me because it works with just one, but i realized the other day that the reason it takes forever to do anything internet related is because im getting pathetic transfer speeds. the highest i can remember is only 800 kb/s. ive tried standing right next to the router and it makes no difference. i know its my drivers fault because i get the same speeds at two different home wifi networks (both houses roughly the same size). my ipod gets a better connection. the driver im using is a broadcom b43 proprietary driver. the one that breaks the working driver is a broadcom STA proprietary driver. i havent bothered to try the second without the first because i just didnt think about it, but i think i will soon and see if it makes any difference. does anyone have an idea as to why my driver sucks? im tired of waiting 20 minutes to watch a 3 minute ..... video.
Firstly, apologies if there is anything incorrect about this request for help. Consider me an intelligent but ignorant first time Ubuntu user. I have a USB wifi adaptor, [URL]../B...ef=oss_product, which claims to be Linux compatible. It was supplied with a CD that includes a Linux directory but windows-only documentation. How do I install the drivers etc, the device is currently entirely unrecognised by Ubuntu 10.04.
I have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.
I still try update my broadcom drivers, because when I try use airodump-ng i receive error.
This error:
Interface Chipset Driver
eth1 Unknown wl (monitor mode enabled)[code]....
I dont know why receive this error WARNING: modpost: missing MODULE_LICENSE() in /home/mobile/Desktop/wdriver/wl.o see include/linux/module.h for more information
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
I installed the netbook remix of 9.10 on a Dell mini10. (Dual boot with XP) I knew that I would have to install the broadcom drivers to get the wireless up and running. What I didn't anticipate is that the eth0 interface would not work. ifconfig shows the device and lists the ip as a 192.xxx number. I am wired directly into our network, and expect an IP in the 10.10.etc range. Pings either return a host unreachable message or say network unreachable. This problem persists even if I set the card to a known good IP. ifdown eth0 returns a message that the interface is not configured. ifup returns a message that it is ignoring the interface.After fighting that problem for a while, I re-installed, thinking that perhaps something had gotten fouled up in the installation process. The problem persists. Nothing has changed.
internet access is no longer working on my computer, ie wget, ping, apt-get update all return unkown host (url or whatever).
However the system monitor (Network History) shows that the system is sending and receiving packets. And what I think is network manager applet shows active network signals for both wireless and ethernet.
I know my laptop has not acquired hardware faults. Since I am posting this message and accessing the internet through the same computer with a Ubuntu live USB start up disk.
I searched through the forums for related posts and tried suggestions. Forinstance
the /etc/resolv.conf
file is the same for both live usb system and hard drive system, so it can not be that.
# Generated by NetworkManager nameserver 79.138.0.180 nameserver 85.8.31.209 the /etc/network interfaces file looks like: code....
I tried the system test (System->Administration->System Test), with only Network tests selected). The results of system test were so extensive I searched for the word internet and extracted lines for internet. Interestingly it says both the network_test and the internet_test are _passed_.
But the internet does not work in either in web browsers or with BASH commands.
And also:
erlang-inets Erlang/OTP Internet clients and servers python-twisted-bin Event-based framework for internet applications python-twisted-core Event-based framework for internet applications network_test pass internet_test pass
I installed 10.04 today, not having used this system for Ubuntu since 8.04. My wireless card (Texas Instruments ACX 111) worked perfectly in Windows XP and 7, and it worked on installation in 8.04.
I did a clean, full install of 10.04 (no dual boot or anything), but the wireless card is not working. The OS doesn't even seem to recognize that it is there because I can't even scan for networks, let alone connect.
The only reason I have a connection on this computer is because I am sharing the internet via ethernet from my Macbook.
I tried using b43-fwcutter in accordance with the Ubuntu Forums and nothing happened, and then I decided to look a little further. According to LinuxWireless.org, the BCM4306/2 actually uses the b43legacy drivers, so I purged all of b43-fwcutter along with firmware-b43-installer and downloaded firmware-b43legacy-installer.
Nothing happened, so I downloaded b43legacy manually per the instructions listed at LinuxWireless.com, and manually extracted from wl_apsta-3.130.20.0.o to my /lib/firmware folder. Nothing happened again. I made sure to check additional drivers and nothing shows up.
As per the ticket posting instructions, I've included all the info you guys could need. from what I can conclude, the wireless isn't even ON, but it's integrated and I have NO IDEA what I have to do to get it up and running.
At least in OpenSuSE 11.3 LXDE I was able to get the wireless on, although I had some major connection issues, I guess it couldn't resolve the handshake completely, or take my SSID/PSK properly.
I need static networking to be functional on F14 to try freeipa....the problem I have is I am unable to get eth0 to start. Knowing the software it has to be eth0 or it will likely not work... The guest is in a RHEV6svr environment... So I have disabled NetworkManager and enabled networ and set manula settings in ifcfg-eth0 incl the hware address but eth0 wont start on boot....
next I tried setting a e1000 network card after the hypervisor default didnt work, only to find that this doesnt work either. The MAC addresses are changing as I try and fault find a dead DNS client issue (yet another F14 issue but lets not go there yet, it could be RHEV's "funky" NATing setup)....so I suspect F14 has got its knickers in a twist over the MAC for ETH0....I keep changing it and I suspect it cant keep up.....so I need to disable the automatic function(s), if there is one....
So somewhere down in the code there is probably a line saying eth0= <mac address> but despite greping I cant find that.....or not something that I edit and it then works.... I have tried the gui tools and command line tools and I still have no network..... So what would be a totally CLI process to fix this automated crap? ie stop F14 pointing at the wrong MAC for eth0?
I have a question with named and cname records. I wrote a CNAME record into a zone yesterday: valami.teszt.hu. IN CNAME teszt.hu. teszt.hu has an A record: teszt.hu. 14400 IN A val.id.I.P
I restarted named. My problem is: when I visit valami.teszt.hu I get the "Apache is functioning normally" message, and not teszt.hu. And if I write an A record for valami.teszt.hu instead of CNAME record (valami.teszt.hu. 14400 IN A val.id.I.P), the valami.teszt.hu will display message mentioned above too.
Ubuntu seems to think my device is disabled. The switch is on and the blue light next to the switch is also on. I read up on this on other threads, but the solution involved using the cd. I had to install from windows using the iso and alcohol 120 because my cddrive is totally dead.
I just loaded the Ubuntu maverick AMD64 beta and to my regret I see that the wireless adapter isn't functioning, even after applying updates through wired connection.
Terminal lspci -v command tells me that the network adapter is present as Atheros AR928X Wireless Network Adapter on PCI-E - rev 01 and that the ath9k module is being used by the kernel.
I recently switched from ubuntu/mint to fedora, and I cant seem to get my wifi drivers to work. its a generic wifi usb that ubuntu, mint, and chakra have been able to automatically detect and install. is there a tarball that has all the generic drivers for ubuntu, that I can install in fedora so I can get my internet connection working?
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
I just recently installed Ubuntu on the HP Mini 1000 and the drivers for the WiFi aren't working correctly. Is there a place where I can download the Drivers for WiFi and get them to install.
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
Are USB WiFi adapters more likely to work in Linux than other WiFi adpaters like PCI cards etc?Im just wondering if they can use a generic USB class driver rather than having to have one for the specific chip set?
I have purchased Lenovo G460 laptop recently. I wanna use the linux so i installed fedora 13. The problem is internet is not connected through wifi. I browse several forums but failed. I am new to the Linux environment. code...
I am having some issues compiling my WiFi card drivers. I haven't encountered this issue on any other distros (including Fedora). I would prefer to use openSuSe however so I hope someone here could tell me how to solve this.I have a fresh install of the x586 DVD, fairly complete.The issue is picture in the attached image: basically I try to run a make and I get the pictured error.
