Ubuntu Networking :: TI ACX111 Wireless Card Not Functioning In 10.04?
May 6, 2010
I installed 10.04 today, not having used this system for Ubuntu since 8.04. My wireless card (Texas Instruments ACX 111) worked perfectly in Windows XP and 7, and it worked on installation in 8.04.
I did a clean, full install of 10.04 (no dual boot or anything), but the wireless card is not working. The OS doesn't even seem to recognize that it is there because I can't even scan for networks, let alone connect.
The only reason I have a connection on this computer is because I am sharing the internet via ethernet from my Macbook.
View 3 Replies
ADVERTISEMENT
May 11, 2011
I was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
View 3 Replies
View Related
Sep 21, 2010
Dell N4010 and other brands with UBUNTU 10.04
Wireless need propriety drivers and will not function with out them being installed
And LAN port (wired RJ45 port) is not working too.
So what is the easy way to update these drivers.
Borrow someone else USB wireless adapter, that will work instantly with Ubuntu version you just installed.
[URL]
Then you can update on line via USB wireless adapters. I use WG111v2 to connect to dell 4010 to update other wireless drivers.
View 1 Replies
View Related
May 8, 2011
I tried using b43-fwcutter in accordance with the Ubuntu Forums and nothing happened, and then I decided to look a little further. According to LinuxWireless.org, the BCM4306/2 actually uses the b43legacy drivers, so I purged all of b43-fwcutter along with firmware-b43-installer and downloaded firmware-b43legacy-installer.
$ sudo apt-get install b43-fwcutter firmware-b43legacy-installer
Nothing happened, so I downloaded b43legacy manually per the instructions listed at LinuxWireless.com, and manually extracted from wl_apsta-3.130.20.0.o to my /lib/firmware folder. Nothing happened again. I made sure to check additional drivers and nothing shows up.
As per the ticket posting instructions, I've included all the info you guys could need. from what I can conclude, the wireless isn't even ON, but it's integrated and I have NO IDEA what I have to do to get it up and running.
At least in OpenSuSE 11.3 LXDE I was able to get the wireless on, although I had some major connection issues, I guess it couldn't resolve the handshake completely, or take my SSID/PSK properly.
Here goes! (God bless 2>&1 | tee -a)
#Machine info
MFG: HP
MDL: ZE4800
#OS
[Code].....
View 1 Replies
View Related
Jun 28, 2011
I've got a Toshiba Satellite L25-S199, and it includes an Atheros wireless NIC based on the AR2413 chipset, I believe. Currently I'm running OpenSUSE 11.4 on it, but I've previously had Xubuntu and Ubuntu, and this problem has always existed with WPA2.
Specifically, the LAN is a wireless WPA2 with AES encryption (no TKIP). The computer can connect to the network just fine, but the web is all but unusable; it is very finicky, mostly failing to fetch any pages, but sometimes succeeding (mostly with Google pages, and those from the local network's servers). Perhaps a DNS issue?
This problem doesn't occur with WEP or no encryption.
Here's the output of lspci
09:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
And the relevant output of hwinfo
22: PCI 904.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.SufKn0XT2bB
Parent ID: qscc.hTSZxA6Z5F6
[Code]....
View 1 Replies
View Related
Aug 29, 2009
I just got a graphics card ATI installed on my fedora 10. I would like to see the functioning of the same with some kind of game. Any suggestions for game under fedora 10 to see the graphics application.
View 1 Replies
View Related
Apr 24, 2010
I tried to run the XBMC live disc but could not fully boot. Each time I could only get to a command prompt after the XBMC splash screen with spinning circle. So I thought, "Maybe because my computer is sort of old (Pentium 4, 2.26 Ghz, 512 RAM) it doesn't like the XBMC Live disc. It will probably work if I install to the HDD." I installed it only to get the same result, XBMC splash screen then loading of command prompt. Does anyone know how to fix this? Is the computer compatible?
View 1 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Sep 2, 2011
I'm running openSUSE 11.4 on an HP 630 laptop with KDE. Everything works fine but cards inserted into the internal SD card reader are not read, and from what I can tell the reader is not recognized at all by openSUSE on my system. The reader does not appear listed in hardware information and is not listed with the command fdisk -l . There appear to be no references at all to the reader. The reader is recognized, however, on a live USB of Linux Mint 11, where the model is listed as "Generic - xD/SD/M.S." (the vendor too), revision 1.00. It is listed as an SCSI Controller scsi5. Typing lsscsi in the termal of openSUSE provides the following:
Code:
linux-mlxx:/home/eve # lsscsi
[0:0:0:0] disk ATA Hitachi HTS54323 ES2O /dev/sda
[1:0:0:0] cd/dvd hp DVDRAM GT30L mP06 /dev/sr0
lspci provides:
[Code]...
View 8 Replies
View Related
Jan 25, 2010
I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
[Code]..
View 9 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Mar 30, 2010
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies
View Related
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
May 5, 2011
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Jun 30, 2011
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
View 2 Replies
View Related
Aug 8, 2010
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies
View Related
Oct 17, 2010
How do I install the correct driver for my Ubuntu 10.10 system for the AR9285 wireless card? code...
View 2 Replies
View Related
Apr 30, 2011
I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
View 2 Replies
View Related
Jun 5, 2010
I want to buy a wifi card that will, hopefully, be rock stable under my kubuntu 10.04 64 bit. Currently I have TP-Link Atheros card and stability in Linux is horrible. Please DO NOT give me links to compatibility list. Just suggest a network card that is most likely to be stable with least manual tuning effort required.
View 2 Replies
View Related
Mar 20, 2011
Thinking of getting a wireless pci card for a desktop and I have seen a lot of people have issues with specific wireless cards. Is there a particular card or chipset that will be relatively painless to use?
I have seen this question asked before, but have not seen any replies.
View 5 Replies
View Related
Apr 29, 2010
I installed the netbook remix of 9.10 on a Dell mini10. (Dual boot with XP) I knew that I would have to install the broadcom drivers to get the wireless up and running. What I didn't anticipate is that the eth0 interface would not work. ifconfig shows the device and lists the ip as a 192.xxx number. I am wired directly into our network, and expect an IP in the 10.10.etc range. Pings either return a host unreachable message or say network unreachable. This problem persists even if I set the card to a known good IP. ifdown eth0 returns a message that the interface is not configured. ifup returns a message that it is ignoring the interface.After fighting that problem for a while, I re-installed, thinking that perhaps something had gotten fouled up in the installation process. The problem persists. Nothing has changed.
View 9 Replies
View Related
Apr 6, 2011
internet access is no longer working on my computer, ie wget, ping, apt-get update all return unkown host (url or whatever).
However the system monitor (Network History) shows that the system is sending and receiving packets. And what I think is network manager applet shows active network signals for both wireless and ethernet.
I know my laptop has not acquired hardware faults. Since I am posting this message and accessing the internet through the same computer with a Ubuntu live USB start up disk.
I searched through the forums for related posts and tried suggestions. Forinstance
the /etc/resolv.conf
file is the same for both live usb system and hard drive system, so it can not be that.
# Generated by NetworkManager
nameserver 79.138.0.180
nameserver 85.8.31.209
the /etc/network
interfaces file looks like:
code....
I tried the system test (System->Administration->System Test), with only Network tests selected). The results of system test were so extensive I searched for the word internet and extracted lines for internet. Interestingly it says both the network_test and the internet_test are _passed_.
But the internet does not work in either in web browsers or with BASH commands.
And also:
erlang-inets Erlang/OTP Internet clients and servers
python-twisted-bin Event-based framework for internet applications
python-twisted-core Event-based framework for internet applications
network_test pass
internet_test pass
View 4 Replies
View Related
Jan 7, 2010
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
View 9 Replies
View Related
Jan 10, 2010
Just like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies
View Related
Jan 26, 2010
I have been messing around with ubuntu for a few hours now trying to get my wireless driver to work, but I am having no luck. It seems like I installed the driver right, and network-admin use to show the wireless, but I couldn't unlock it to mess with properties. Now it doesn't even show wireless, and I still can't unlock it, so I'm unable to get my wireless card to work.
View 9 Replies
View Related
Feb 2, 2010
I have a MSI CX600 notebook with a :Ralink 802.11bgn 1T1R Mini Card Wireless Adapter (this name appears in WIndows 7)Can anybody tell me how to install it on Ubuntu 9.10,because I don't have internet connection.
View 3 Replies
View Related
Feb 7, 2010
I just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies
View Related
Feb 18, 2010
I'm totally sick of my WiFi Card, a Realtek 8187 connected by miniPCIe, althought internally designed as USB, I've tried all there is, and I've decided to change it. Which brand do you guys recommend? In my experience, I want to avoid Realtek and Atheros, but which brand offer the best "out-of-the-box" experience, and less overall issues? Intel, Broadcomm, maybe another Atheros or Realtek model, or whatever you guys think it's the best choice
View 2 Replies
View Related
Mar 31, 2010
Broadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.
View 7 Replies
View Related
