I newly installed ubuntu 9, but I am not able to setup the internet dialer. I am not using cable modem. Lan cable from my isp's switch is directly connected to my Pc's ethernet card. In windows XP one dialer is created using Rasppoe. In ubuntu I tried it using pppoeconf command but itis notable to setup the connection.
View 3 RepliesI am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
I'm using redhat linux 9 n unable to connect to the internet.my isp is log2space..they have given me a username n passwd which works in windows OS..have no clue how to setup a dialer or how to config in redhat 9
View 2 Replies View RelatedWvdial give me this error
PHP Code:
--> WvDial: Internet dialer version 1.60--> Warning:
section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
I'm trying to resolve an issue with a dial up modem and really need some help. I haven't used dial up in many years and not even sure how to approach the problem. Making matters worse, I haven't had a landline phone in years, so am trying to troubleshoot this problem and each time have to take it back to a friend, for whom I have installed Kubuntu 10.04. All works fine on my high speed ethernet and wireless, but I can't get the dial up she needs to work.
The system is a Compaq Presario V2000 laptop. KInfoCenter reports an ATI Technologies SB400 AC'97 Modem Controller. I know the modem hardware is fine, as it was working perfectly when I removed Windows XP and installed Kubuntu 10.04.I tried using KPPP, however KPPP will not let me set the DNS to Automatic...it is grayed out. So, I've installed both wvdialer and Gnome Dialer. Gnome Dialer seemed to set up fine and all user info. number to dial, etc. was set up.The problem is that when a telephone line is connected to the modem and you attempt to dial, no dial tone is detected.I don't know how to approach this, not how to troubleshoot it. I would be happy to provide any logs or output here, if someone can tell me what to do.
I am using Ubuntu 10.04 LTS the Lucid Lynx and gnome interface.
I have just installed a broadband USB device that was detected and all properties were shown.
I don't know to get it dialling to the service provider or what dialler shall I use
I just finished downloading the latest version of xubuntu on my dell insperon 1545. I went to set up the internet and i cannot figure out how. In the top right corner the connection icon has only one option that i can select, and thats configure the vpn settings i think. I installed it using dual booting next to windows 7, so i keep switching back and forth trying to look something up and go back to see if it will work. However, i think i should make the point that i've never worked with any linux type o.s. before.
View 7 Replies View RelatedRunning Ubuntu 9.10 Ive just got my wireless connection working after first having got the wired eth0 connection working.
With the wired connection I could SSH into my server through my firewall/router (via a forward). I can run up VNC, from there firefox, browse the web - all is well.
I have now setup the wireless connection, using a static IP, and I can likewise SSH into my server. I can run up VNC. I can ping my router. I can log onto it via VNC. I can browse to my router. But I cant browse the internet.
But I cant ping google.com. The reason is there is no host lookup service. Nslookup eventually says no servers could be reached.
So specifically, if I ping www.google.com Im told "unknown host". If I do an NSlookup on it I get timeout, no servers could be reached. However if I ping 66.102.11.104 I get responses.
I see no relevant entries in my firewall log.
Unfortunately I cant traceroute because the package isnt found - and of course I cant install it because I have no internet !
Strangely (to me at least !) if I then tunnel through SSH and browse the web, I have no problems. It works ? I know I am browsing through my SSH tunnel because whatsmyip gives the IP of my router at home, not where Ive SSHd in from. I can surf just fine.
why I cant do host lookups any more (and this did work with my wired connection, but whether its related to my change to wireless, or static IPs or both I cant be sure - it certainly appeared to happen at the same time). And, more to the point, what I need to look for/do to rectify it ?
As a bonus Id be interested in why I can SSH and browse via tunnelling but not direct from my server (via VNC). Just for interests sake !
if config reports :
wlan0 Link encap:Ethernet HWaddr 00:90:4b:27:ae:17
inet addr:192.168.1.69 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::290:4bff:fe27:ae17/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
I have BIG troubles trying to set up wired internet connection in Ubuntu! To be able to connect to the internet I have to enter my MAC address, 2 IPs, netmask and 2 DNS address. When I try to edit the default internet connection eth0 with my correct information, the minute I enter my MAC address and save the changes the network manager creates new internet connection with wrong data and use it instead! I can't select the correct internet connection from the top bar where the internet icon is, because it is just not there. The only connection that I can choice is the new default one with the wrong data! If I try to create new separate internet connection with my correct data the same thing happens! The moment I enter my MAC address and save it, the internet connection disapears from the list of internet connections in the internet area in the top bar and I can't select it. I tried googling it, but with no luck I think that if I set up my connection trough the terminal everything will be ok
View 2 Replies View RelatedThere is 2 networks that I would like to be part of
a) Through my wlan0 --> Internet DSL
and
b) Through my eth0 --> WUG - PTAWUG
I can only get one of the networks to work at 'n time. The wlan0 works fine when I start my PC, but when I want to access the WUG I need to do the following command:
Code:
sudo route add -net 172.16.0.0 netmask 255.240.0.0 gw 172.24.6.177 dev eth0
with the above command, I can then access the WUG but not the internet through my wlan anymore.all data goes to my wlan as standard unless its on the 172.16.0.0 network
I would like to set up a user account with no network access. Reason is that sometimes my little daughter plays with the computer (for example watching movies on dvd's) and I want to prevent internet access in case she plays unattended. Is there a simple way to do that? I am using ubuntu 10.04.
View 4 Replies View RelatedJust installed ubuntu 10.10 on a Compaq Presario X6000 laptop... installed it inside Windows 7 and now I'm having problems going to the internet (wired.. or wireless).
View 3 Replies View RelatedI have kubuntu 8.10 up and running however I am not able to get internet configured. this is on a laptop i re-purposed. I have ubuntu on a desktop that works just fine. however w/ kubuntu no such luck. i realize its just kde vs gnome and am connected to the same router and such so all should work just fine, but alas it doesn't.the desktop is configured using dhcp, not static IPs.
the laptop w/ kubuntu isn't recognizing eth0
>cat /etc/network/interfaces displays:
auto eth0
iface eth0 inet dhcp
after restarting and running /etc/init.d/network restart.there is no resolv.conf... i understand dhcp should auto-create this? furthermore running ifconfig desplays no results ?
how would i set up my Fedora 12 box to connect to the internet using Android SDK's adb forward tcp:8080 tcp:8080 while my phone is pluged in via USB? I'm able to set it up for Firefox. But how do i set it so i can access the repos? i'm using my phone for an internet connection(not WIFI)the app is called proxoid
View 1 Replies View Relatedi am accesing internet via proxy server till now...now i switched from proxy server to broadband connection. can't able to setup internet connection.
View 2 Replies View RelatedI have Dlink Wireless G Access Point.
I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.
In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.
When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.
I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.
I have 1 root-server with 2 NICs, both having their own internet IP addresses:
Code: eth0 = 8x.x.x.183
eth2 = 8x.x.x.205 We only have one gateway on that network:
Code: gateway = 8x.x.x.1 We want to use eth2 for postfix + http, and eth0 for all the other stuff.
How can this be setup ? With route / ip route / iptables ?
I am running CentOS release 5.6 (Final) and have successfully installed PPTPD and this works great internally.
I want to access my Linux box remotely on the internet via my VPN tunnel. However I am not sure what I need to do on the Linux box to make this happen. My linux box is multihomed as follows
PSTN WWW <===========> ADSL Router Firewall <----------------> [eth1 192.168.x.x] Linux Box [eth0 172.16.x.x] <-----> to LAN
The desired topology is as shown.
VPN Client <------> Home ADSL Router <======= PSTN WWW =======> ADSL Router <------> eth1 Linux Box
1. The VPN is setup and bound to eth1 and eth0 and works well internally
2. IPSec, GRE and PPTP rules have been declared on the router which port map to eth1
However I am still unable to setup a VPN connection to Linux Box I suspect something hasn't been done or I have setup my NATing or IPTables correctly on the linux box.
I want to settup a proxy server who just redirect the internet connection to my second computer. I try Squid Proxy but its too complicated for me. Can you sugest me another more simple program to do what i want?
View 1 Replies View RelatedI installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies View RelatedI am running Ubuntu server 10.10 ( i think )i set it up as a LAMP.. apache mysql and php 5.My problem is, when i first set ubuntu up i set it up as dhcp internet and everything worked fine.Now i just upgraded my internet service because my last connection was only 4 mbps.And now i have a static ip. I bought a router, configured the router, and my windows 7 pc works like a charm, but i have no earthly idea how to re-setup the ubuntu server with a new internet connection, the only thing i did notice is the preferred DNS and alternate DNS were loaded onto ubuntu.
View 1 Replies View RelatedI am trying to get my father to quit using Windows. His only demand is that he be able to have a nice contact manager. Evolution looks like just what he needs, but it seems to be missing one key feature: a phone dialer (don't confuse this with a dial-up Internet dialer or a VOIP applicaiton; those are not what I am looking for). What I want to know is:
1.) Is there a simple phone dialer for Gnome (like Kall for KDE)?
2.) Can it be used with Evolution (or is there an Evolution plugin to do this)?
3.) If there is not way to do this with Evolution, is there another Gnome contacts manager/calendar/task scheduler that has this capability?
I guess if I can't find one, I'll have to go to Kubuntu since it appears to be able to do this with Kontact, but I really prefer Gnome so I would rather not have to do that.
how configure a call center soft-dialer. I just configure freePbx on centos 5.3 and i also configure the internal extension. But i cant understand how to configure outbound & inbound settings on freepbx plz help me, and can anybody help me how to compile the lead management and auto dial of the lead features in freepbx, which software do that and what is the compile method
View 1 Replies View RelatedI'm trying to use as few KDE packages as possible in Xfce and yesterday found and installed Chestnut-dialer (./configure, make, make install).When trying to run it as a user it gives the message, "pppd:must be root to run pppd."Apparenty you have to set the pppd UID for root. Once done it will make the connection as user, but you can't "go anywhere." That is the e-mail client, browser, etc., report they are not connected.So far the only way to get it to work is to open a terminal, sign on as root (su) and fire up Chestnut-dialer from the command line.
View 3 Replies View Relatedcan any one there tell me how to make broadband connection dialer on linux which ask for username and password as on windows for connecting to the internet
View 3 Replies View RelatedI've bought a Conceptronics CPHONELU (C01-200) VoIP USB phone. I would like to take full advantage of my VoIP phone in Linux. Currently I'm using Sip Communicator as the softphone, but I tried x-lite 3.0 on Windows too. The phone works has like a regular headset, I can hear and speak without a problem. However I cannot take full advantage of the phone, since the phone keyboard only work in Skype through the Skype Portal software that come bundle with the phone (Windows only). Is there a driver that I can use in order to be possible to dial using the phone and display the called ID with a regular softphone?
View 2 Replies View RelatedI am a developer working on an application which needs to dial out via modem. The modem activation/deactivation is done programmatically by the application, which may be running unattended. The online time is billed by the minute at a very high rate so it is imperative that the dialler does its best to terminate a connection whenever signalled to do so by the application.
The preferred means of communication with the dialer would be via DBus, due to design/architectural considerations. The current solution relies on a DBus wrapper around pppd, but it has been found lacking in reliability (leaving connections open from time to time).I have already reviewed some candidates such as wvdial, and network-manager but unfortunately those were unsuitable.
I use Huawei EC1260 modem for mobile broadband connection. What are the command line shell based ppp dialing applications available apart from wvdial? insight how to use pppd/chat directly.Actually wvdial is working on debian very well with this modem. But I need to use it on an arm le based system, where wvdial does not work properly because of setcontext(), getcontext() dependency on arm platforms.
View 2 Replies View Related