Red Hat / Fedora :: Monitoring For Wireless Connection Using Network Manager

Jan 5, 2010

I use network Manager to connect to wireless broadband on Fedora 12.Are there any tools that can provide me logs about connection times, bandwidth monitoring etc.Basically, I need logs like what kppp provides with accounting.

I can use kppp to connect and get the logs I need but I want to connect to the network as soon as I plug it in - Only Network Manager allows this.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Network Manager Remembers Wireless Connection?

Apr 22, 2011

I installed an old laptop with Xubuntu and confirmed the wireless card was working by bringing up a couple of nearby networks owned by my neighbors.

However every time I book the computer, a popup login form comes up for them, which I don't want. How can I delete these from the 'cache'?

View 1 Replies View Related

Fedora Hardware :: Wireless - Network Manager Does Not Indicate Any Wifi Network

Oct 20, 2010

I happened to Fedora 13 that the network manager does not indicate any wifi network and I had to turn off the notebook for a while and then recover, this also happened to me 2 or 3 times on ubuntu 10.04 too. my card is an Atheros AR5007EG.

View 2 Replies View Related

Fedora :: Network-manager Looses Connection When 'Allow All Users' Is On

Sep 17, 2010

I have an issue with network-manager. When I edit my wireless settings and enable 'Allow all users' (I have a german locale so I don't know the exact words but I guess it's close enough) the connection drops and doesn't reconnect. If I click on the wlan access point manually (in the nm-applet) it asks for my WPA pass. This is odd since it was already in the wlan settings.

Then when I reset the 'Allow ...' to off, I'm asked for my su passwd and the connection is re-established. Ideally the nm would connect automatically at boot if the AP is available so I'm not happy with the current state...

View 1 Replies View Related

Fedora Networking :: Connection Sharing With Network Manager

Dec 21, 2010

I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?

View 6 Replies View Related

Fedora Networking :: Network Connection Manager Gone / Not Working

May 15, 2011

Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.

What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.

View 6 Replies View Related

Fedora Networking :: Network Manager - Terminating Current Connection

Sep 19, 2009

I have installed recently the Fedora 8 in a computer and during installation it was set a static IP with the netmask and gateway. At first it worked well, but after some boots the connection begins to fail. It seems that the network-manager withdraws the static IP and tries
to get connection via DHCP. Below is the /var/log/messages file during the failed connection:

Code:
Sep 19 10:36:53 canario avahi-daemon[1695]: Interface eth0.IPv4 no longer relevant for mDNS.
Sep 19 10:36:53 canario avahi-daemon[1695]: Withdrawing address record for fe80::20d:87ff:fe0c:355f on eth0.
Sep 19 10:36:53 canario NetworkManager: <info> SWITCH: terminating current connection 'Auto Ethernet (eth0)' because it's no longer valid.
Sep 19 10:36:53 canario NetworkManager: <info> Deactivating device eth0.
Sep 19 10:37:07 canario system-config-network[2195]: -+ //etc/modprobe.conf #011eth0 alias sis900 .....

View 5 Replies View Related

Fedora Networking :: Use Network Manager To Connect To A Pptp Vpn Connection?

Feb 25, 2010

I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?

View 2 Replies View Related

Fedora Networking :: Create A Broadband Connection Using Network Manager?

May 26, 2011

Just replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..

Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.

View 1 Replies View Related

Fedora Networking :: Samba And Network Manager In 9 - Setting Up A Wired Connection?

Feb 3, 2009

I have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).

Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...

View 1 Replies View Related

Fedora Networking :: No Internet Connection Although Network Manager And Icon On Upper Bar Says Connected

Jun 22, 2011

I recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.

View 6 Replies View Related

Ubuntu Networking :: Network Manager - Wireless Connection - Dell Laptop Error Wicd States "Wrong Password" Which Is Not True

Jun 11, 2010

These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.

Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?

[Code]...

I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.

View 1 Replies View Related

Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work

Nov 22, 2009

I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:

pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type

Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.

View 2 Replies View Related

Fedora Networking :: Yum Broke Wireless - Network Manager Crashed

Apr 30, 2011

So, after doing a 'yum update', I minimized the terminal and completely forgot about it - so I accidentally went ahead and suspended my laptop before it had finished. I resumed my laptop and noticed that yum hadn't finished 'cleaning up' the packages. Nevertheless, yum continued and the process finished. After an hour or so use of the internet (wirelessly), all of a sudden the wireless network disconnected, and NetworkManager crashed. I rebooted my computer only to find that NetworkManager now says that my 'firmware is missing' for my wireless card.

View 6 Replies View Related

Fedora Networking :: Wireless Not Connecting - Network Manager Won't Allow Me To Turn It On

Sep 5, 2011

I'm having problems with my wireless card. The network manager won't allow me to turn it on. It is working in windows and in ubuntu, but I can't get it to turn on under fedora. I'm using a Lenovo B570 laptop and it uses the Centrino Wireless-N 1000 for wireless.

View 5 Replies View Related

OpenSUSE Wireless :: Knetwork Manager Wireless Connection Gets Disconnected And Ask For Password And Again It Connects

Aug 5, 2010

I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.

View 8 Replies View Related

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

Fedora Networking :: F10: Network Connection Not Stable (wired And Wireless)?

Feb 17, 2009

I've installed F10 on my laptop since few days and I'm facing an annoying networking issue: the network connection seems to work well when, suddently, it goes down for a while, and then come back.This happens with both wired and wireless (Intel PRO/ Wireless 3945ABG) connection.

View 6 Replies View Related

Fedora :: Installing Wireless Card Drivers Without Network Connection

Jul 23, 2009

I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.

View 13 Replies View Related

Fedora Networking :: Deleting A Wireless Connection / Can't Get Back Onto Network?

Jun 14, 2011

I was on my wireless network when I accidently switched on "airplane mode". Several reboots later and I can't get back onto my network. It keeps prompting for a password, even though it's the correct password. I've booted into Mac OSX & Windows on the same laptop and they connect no problems.

How can I delete the network connection to take it from the top again ? You used to be able to right click on the network connection in F14, select "edit connections" and then delete anything that was offending. That seems to have been removed now though ? Where is it stored and where can I kill it ?

View 1 Replies View Related

Networking :: Fedora 13 - Wireless Network - Incorrect For Connection To Router

Nov 1, 2010

I changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.

View 4 Replies View Related

OpenSUSE Network :: Network Manager Default Connection Can Handle Virtual Interfaces?

Jun 7, 2011

I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?

View 4 Replies View Related

OpenSUSE Network :: Configure A Connection With YAST As Well As With Network Manager?

Feb 1, 2010

Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.

I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).

I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.

View 1 Replies View Related

Debian :: Network Manager Can't Share Network Connection?

Nov 13, 2015

In Googling around it appears that the Network Manager used to have a nice simple (obvious, logical, straightforward, intuitive, easy-to-use... ... can you tell I'm a bit surprised that there's not a simple button to do this, it's pretty common functionality ) option in the IPv4 tab called "Shared to other computers" allowing you to share your network connection with any computers connected to yours... kind of like this:

[URL] ....

Professor Google seems to indicate that this may have existed in Debian at one point but, I don't see this option anymore. How do I get it back (or is there another gui way to do this without editing the /etc/network/interfaces file... if there's no other way to do this... that's fine but I'd prefer an easy method of enabling and disabling sharing)?

What I'm trying to do... I have a Beaglebone Black connected via IP over USB. When I'm ssh'ed into the BeagleBone, I want to be able to use aptitude install to grab new packages etc... and that kind of requires access to the outside world. Everything I've found so far seems to to require a modification to the interfaces file but since (according to the interfaces man page) the preferred method is to use the network manager if possible... I'm trying to avoid that.

* It should be noted that I'm running sid with the experimental 4.3 kernel so... maybe in doing so I've shot myself in the foot?

View 5 Replies View Related

Ubuntu Networking :: Wireless Network Connection Active But Still Not Internet Connection?

Jan 24, 2010

Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)

ubuadmin@ubucomputer:~$ ifconfig

wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....

View 5 Replies View Related

OpenSUSE Network :: Set Connection With Network Manager?

Nov 27, 2010

with the ifup method everything works fine. But now I bought a wireless card, so I prefer to use the network manager to manage my connection. On my computer I need a static IP for wired connection, so I created a new wired connection and I called it "wired connection". But network manager always connect automatically to "Auto eth0" and I can't find how to modify this connection. Setting "wired connection" as default didn't change anything, probably becouse it need me to unlock the default wallet... Now, another problem, I really don't know why network manager applet doesn't appear on system tray, but I'm sure that I'm using it instead of the ifup method.

View 9 Replies View Related

Fedora Networking :: Atheros AR2413 FC10 - D-Link Wireless Adapter Worked Fine With Network Manager Disabled

Mar 3, 2009

I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.

[Code]....

View 5 Replies View Related

General :: Way To Prevent Network Manager From Storing Password For Wireless Network

Sep 27, 2010

Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?

View 1 Replies View Related

Ubuntu Networking :: Network Manager Stopped Recognizing Wireless Network

Jan 24, 2011

I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...

Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.

P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?

View 2 Replies View Related

OpenSUSE Network :: Wireless Not Responding, Hardware / Unable To Enable It Through Network-manager Applet?

Apr 4, 2010

I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved