Ubuntu Networking :: Partially Installed Netgear WG311 And Now No Wired Internet?
Apr 1, 2011
I installed 10.04 onto an old dell and its was running great, internet etc.. I then had my home desktop crash and said great, let me bring the dell home so the wife can use it. At home, i have a wireless card ( Netgear WG311 ) that I then installed into the Dell. Being that she was needing to use it online right away, I searched for the first install as it was not detected, and used used synaptic to install the bcmwl-kernal-source as that was the prefer ed driver for Netgear. So now that I installed that, not only have I not fixed the wireless issue, I now have no wired internet. I've been searching and re reading as many steps as I can, but am running out of time as she needs the computer tomorrow. Installed the ndwrapper ? but was not able to actually get the driver installed. All the other threads seem to be older ubuntu versions, and maybe its just me but the slight variation from one to the nex has me a little confuzed.
mike@mike-desktop:~$ sudo lshw -c network
*-network:0 UNCLAIMED
description: Ethernet controller
product: 88w8335 [Libertas] 802.11b/g Wireless
[code]....
View 4 Replies
ADVERTISEMENT
Jul 23, 2011
I have an ibm think pad and for some reason the internet(firefox) stop working and i don't know why , the netwprl settings have disappeared or anything on fixing it , yes i have tried restarting the modem but that hasn't work ethier Also i don't really know where the re-start disk so is there anyway i can fix it with out the disk?
View 4 Replies
View Related
Aug 28, 2010
My set up: Roku digital video player n1050 (it does not look like the ones in the manuals I have found online, and there was no manual in the box--this only has the red, white and yellow jacks on the back, plus the places to plug in the ethernet and power cables; reset is on the bottom)
Wired network Netgear wnr854t Router assigns ipaddresses to devices attached to it Production environment 7 computers regularly access this network wired 1 additional computer regularly accesses this network both wired and wireless I am posting this going through this router, so you can see it is working
Symptoms:
Power up Roku with ethernet connected In set up, I chose wired connection Roku finds the ethernet cable Roku cannot find the local network and stops Router can see the Roku box, and says it is attached as 192.168.0.7 I can successfully ping the Roku box, but not ssh into it. I can telnet into the Roku box using telnet 192.168.0.7 8080, but I do not see anything I can do from there.ng knowledge!
View 1 Replies
View Related
Feb 2, 2010
I have been searching through these forums the past couple of day as I have just installed Ubuntu 9.10 64bit on my custom whitebox. I have had windows 7 on it in the past, but want something different now.
I guess my main question is if anyone knows a simple to install wireless card (pci or usb) for ubuntu 9.10 64. I currently have the Netgear WG311V3 PCI card installed, but I can not for the life of me get it to work under Ubuntu. I have tried numerous different methods from search google, these posts, etc. but I can not get any of them to work.
View 2 Replies
View Related
Jun 25, 2010
I'll plug in my Netgear wireless USB adapter, and it'll recognize it right away. I'll type in my WEP key, and then it will say configuring. It will then bring up a "Secrets for [router]", with a ASCII key, and I'll check the pass phrase I entered, which is the correct WEP key. I then hit okay, and it says "setting up network address", and then brings up the Secrets page over again.
This particular wireless card works fine on Ubuntu, and worked fine on Zenix, but for some reason, won't work with Kubuntu.
View 1 Replies
View Related
Feb 3, 2011
Is there anyway for me to access the internet with a Netgear WPN111 usb adapter
View 1 Replies
View Related
Sep 1, 2011
I am trying to get a NetGear WNDA3100 working on another computer with ubuntu. I've searched and searched, but all the threads and answers say to install some ndiswrapper thing. One problem with that though- the desktop doesn't have any adapters at all, I'm trying to install the WNDA3100 just to get internet in the first place. I have no internet, cannot download and install anything, and I can't use any apps or commands that don't come with the default Ubuntu 10.04. Please help me out here!
View 3 Replies
View Related
Apr 27, 2010
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
View 3 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Jan 15, 2010
Ive spent the last couple of days looking for a way to set this up and cant find the solution anywhere. Right from what iv read so far i understand i have to set the card to master mode but when i try
Code:
sudo iwconfig wlan0 mode master
i get the error
Code:
Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument.I read somewhere that the madwifi driver is up to the task but im still quite new to linux and not really sure how to change the drivers. this is what iv done so far
Code:
wget http://snapshots.madwifi-project.org/madwifi-trunk-current.tar.gz
tar xvxf madwifi-trunk-current.tar.gz
cd madwifi-trunk-r4108-20100115/
sudo make
[code].....
View 9 Replies
View Related
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
Jul 25, 2010
I installed xubunto 10.4 on my pc the other day and every thing was working fine and then the next day my wired network card went down. So I restarted it and it say Wired Network Disconnected. I tried doing sudo ifconfig eht0 up to try and bring the card back online but nothing happens. I also tried reinstalling xubuntu on my computer. Again my internet works then starts freezing up so I restart it and my ethernet card goes down again. I have tried also plugging it into the second ether net port on my computer but that does not seem to work. Also I went into my dhclient-script and went to the bottom to look at my network card stuff.
It reads
#Changed from 'ifconfig $interface inet 0 down' - see Debian bug #144666 ifconfig $interface inet 0
exit_with_hooks 2 "$@"
fi
View 2 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Feb 7, 2011
I installed Debian 6.0 on my hp dv400 laptop, Ive been using linux ubuntu for a while now and my wireless card has always been picked up but after isntalling Debian its not working. This is what I have. Also I cant seem to install awn for some reason.
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 3 Replies
View Related
Jan 8, 2010
I just got a new power supply in my old desktop, and installed ubuntu on it. I've got three NICs in there (for a later project), and when I connect my cable modem to any one of the NICs, then little connection triangle-spinny-thing in the upper-right tries to connect. But it never gets all the way connected.
View 5 Replies
View Related
Feb 21, 2010
I have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
View 9 Replies
View Related
May 4, 2010
I recently did a fresh install of 10.04 from 9.04 and since then I am unable to use Internet. However my ethernet connection is working fine, as I am able to login to modem and check configuration. I reinstalled twice, downloaded fresh 64-bit & 32-bit and also followed kernel update steps as in few forum posts, but no joy. The firefox is throwing an error "The connection has timed out". My internet connection is working fine as I am able to use my Windows Laptop to post this message. I checked system > administration > hardware drivers and couldn't find any unsupported hardwares.I had similar issue when upgrading to 9.10, hence stayed on 9.04. When I looked at LTS image, I couldn't resist and cleaned up 9.04.
View 5 Replies
View Related
Jun 1, 2010
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies
View Related
Oct 18, 2010
I have been using lucid ubuntu 64 bit on this pc for months with no problem till yesterday. I noticed yesterday that eth0 was no longer being set up on boot and so internet is not there now. I am currently on the internet using karmic ubuntu.
I'm thinking an update with aptitude? What can I do in lucid to get my networking working? I tried booting into recovery mode and repairing packages but my pc could not get on the net to check the packages.
View 9 Replies
View Related
Nov 10, 2010
I just installed Ubuntu 10.10 tonight on my Acer Aspire One D250 and have no internet at all. I know both the wireless and wired internet work, as I am dual booting WinXP as well.
View 3 Replies
View Related
Mar 26, 2011
I am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
View 9 Replies
View Related
Apr 3, 2011
I no longer have a Auto eth0 connection. I am running 10.04 and have not done any major changes. Here is my ifconfig -a:
Link encap:Ethernet HWaddr 00:1a:a0:97:65:a9
BROADCAST MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]....
View 1 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Jan 31, 2010
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies
View Related
Mar 6, 2010
I installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies
View Related
Mar 20, 2010
I've been running ubuntu for about 6 months, so i'm still abit of a newbie at linux but heres what im having issues with:I'm having troubles connecting to the internet on ubuntu, i have no problems connecting on xubuntu on the same machine. I can connect to my network but i cant access the internet on firefox or snaptic or any of that, but the weird thing is i can successfully ping address' in the terminal. I can also connect to my router config page in firefox using 192.168.0.1.
My internet worked perfectly about a month ago on this ubuntu install, so i cant figure out what i did to make it stop working. I think it may have something to do with the/etc/resolv.conf file because it only exists as /etc/resolv.conf.tmp and when i run "sudo dhclient wlan0" (or eth0) it says:
ubuntu@ubuntu:~$ sudo dhclient wlan0
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
[code]....
View 8 Replies
View Related
May 24, 2010
I installed Ubuntu 10.04 into my compaq notebook. The problem is that I am not able to connect to my wired broadband internet.
Here are the details of my attempts so far:
1)"ifconfig -a" gave 2 devices eth0 and wlan0.
2)"pppoeconf" was unable to detect any ethernet cards.
3)Each time I plug in the LAN cable , the network icon would say "connecting" and ultimately result in "disconnected.Now in offline mode".My ethernet device is Realtek PCIe RT8101E/RTL102E (rev 02).
I also tried to install the realtek driver though I was not confident whether I did it correct.
View 2 Replies
View Related
Jun 2, 2010
I have BIG troubles trying to set up wired internet connection in Ubuntu! To be able to connect to the internet I have to enter my MAC address, 2 IPs, netmask and 2 DNS address. When I try to edit the default internet connection eth0 with my correct information, the minute I enter my MAC address and save the changes the network manager creates new internet connection with wrong data and use it instead! I can't select the correct internet connection from the top bar where the internet icon is, because it is just not there. The only connection that I can choice is the new default one with the wrong data! If I try to create new separate internet connection with my correct data the same thing happens! The moment I enter my MAC address and save it, the internet connection disapears from the list of internet connections in the internet area in the top bar and I can't select it. I tried googling it, but with no luck I think that if I set up my connection trough the terminal everything will be ok
View 2 Replies
View Related
Jul 3, 2010
Hardware: 5 year old Compaq laptop: Presario V4000. - Intel Celeron M Processor 1.3 GHz System: Ubuntu release 10.04 lucid - Kernel Linux 2.6.32-23 - generic - GNOME 2.30.0 Uses a wired connection through a router SEQUENCE OF EVENTS Friday evening - June 2, 2010 Sytem was working OK. Downloaded Ubuntu updates. Put laptop into Suspend mode. Turned off master power at surge protector. about 4 hours later tried to Unsuspend. Could not Unsuspend Pressed power button on laptop for several seconds to shutdown laptop. Saturday morning - June 3, 2010 After Ubunto booted up, launched Firefox. No internet access. File-> showed "Work Offline" checked. Unchecked it, but that didn't fix the problem. Rebooted, and still no internet. Tried an alternate cable (which was working with a desktop Winows XP computer) between router and laptop. Still no internet. Used terminal to ping the IP address of the router - ping unsuccessful.
View 4 Replies
View Related
Aug 14, 2010
I have had the exact same set up 10.04 on the same machine connecting to the net with no problems. I had upgraded from an earlier version.
This time with a fresh install from disk the network manager does not see any connections. How can I get the manager to recognise the network and connect to the net?
I realise that it would help if I posted up the output of some commands in a terminal but I am writing this on my phone and can not cut and paste large chunks of text. I can only hope for some advice until I can get to a computer with a working connection.
Ubuntu 10.04 AMD dual core 64 bit with wired 10 meg broadband.
How can I get the network manager to see the connection
How can I find the MAC address?
View 9 Replies
View Related
