If you install Wicd (it is in the repositories) any network-manager will be automatically de-installed.But eventually, Wicd will still not work properly.Solution:Open your package manager and type in: network-managerIf Wicd is installed, EVERYTHING related to network-manager must be thrown out, sorry: removed!
View 3 Replies
I have a Lenovo IdeaPad s10 which worked flawlessly with wired, I could never get it to so much as search for a wireless network, so I gave up on it long ago.
I'm using UNR 9.10 on it and today, after updating Wicd Network Manager stopped working making it impossible for me to go online with the netbook even when using a wired connection.
I restarted the computer after the update and once UNR booted up wicd wanted root access to use my computer's network cards, I entered my password, this never happened before but whatever, unfortunately after I entered my password wicd didn't show up in the tray and sure enough there was no internet connection whatsoever.
I tried running wicd manually, UNR says opening, but nothing comes up, no tray icon no nothing.
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies View RelatedBrand new to this world. Trying to figure out how to roll-back an app (Wicd). Specifically trying to do this: "edit /etc/apt/sources.list and added links to the karmic repositories for the universe group."
how do I find the karmic repositories links?
I just updated my system to a new kernel with the update manager and now my WICD no longer obtains an IP address. Everytime I try it says "Connection Failed: Unable to get IP address".It was working fine before and even when I reboot into an older kernel it still doesn't work.I'm using a Belking Wireless G adapter.I would have tried downloading another network manager but since I can't even access the internet I'm stuck with changing current settings and nothing seems to work.
View 4 Replies View RelatedWell it seems like every 5 min the update manager is barging in telling me to update so I did last night and then this morning I turn on my computer and a window pops up that says "wicd needs your password" or something to that effect so I put it in. Then I notice wicd is not running. So I click on it in the menu and it pops up in awn for a second then disappears. As I have said before I am fairly new to linux so Im having trouble figuring this out. I don't know any commands i should run or where to start even. My computer is not much use to me without the internet so I would really like to get this fixed.
View 2 Replies View RelatedI have a Dell Mini with Unbuntu Hardy 8.04 with a Broadcom STA wireless card BCM4312 802.11b/g. In April the Network Manager stopped working.After trying various fixes, based on advice and instructions posted for others who had the same issue, today I decided to completely uninstall the Network Manager and install wicd- which seems like a working alternative. I uninstalled the Network Manager and used the installation instructions for wicd (URL...). While connected to the internet with a wired connection, in my Synaptic Package Manager I entered the new address deb URL... hardy extras. Then I opened a terminal and entered.It looks like an argument is needed, but I have no idea how to add that to the command. I've found the key file (I think) here URL...but I don't know what to do next.
View 7 Replies View RelatedBefore I changed the faulty wifi card I installed Wicd. Incidentally it didn't remove Network Manager, a bug that's reported in Launchpad. With the new wifi working well enough with Network Manager, I used Synaptic to remove Wicid, or so I thought.I happen to be checking .xsession-errors and there's an error reported about wicid tray desktop. I removed it and no more errors appear.
After looking for advice here and on the web I used apt-get remove and purge yet a file search of wicd still finds 25 entries, in /etc/, /usr/ and /var/.Some are archives and some are logs but some aren't, why are they still there and can I clean things up?
I removed network manager on my laptop via sudo apt-get remove --purge network manager network-manager-gnome but now I can't install wicd because I don't have Internet.
View 8 Replies View RelatedI am running Natty on a Lenovo T410. I can connect to wireless with no problem using the panel applet but not using wicd. syslog shows it trying to get a DHCP address and finally timing out with no lease offers. I think a big clue is that if I monitor wlan0 using wireshark I get no traffic at all when it tries to connect, whereas with the applet I see the dhcp traffic. It seems as though wicd is connecting to the wrong wlan0. Running "dhclient wlan0" directly gives the same behavior as wicd. I need to use wicd because I typically run enlightenment so can't use the ubuntu applet.
View 5 Replies View RelatedI seem to be having "disconnects" from my wireless network where I stay connected but am unable to ping any hosts, including my router.
I would like to make a simple cron script that checks for this and reconnects.
Is there a clean way to tell wicd to reconnect?
How about sudo /etc/init.d/wicd restart?
I am on Ubuntu 8.04 amd64
misha@misha-d630:~$ dpkg -l | grep wicd
ii wicd 1.6.2.2-1 wired and wireless network manager
misha@misha-d630:~$
I have just installed Ubuntu 9.10 (64 Bit) and I'm trying my best to get this Linksys WMP300N wireless adapter to work.I have searched and gone through a number of threads here with some level of progress but I still can not get this to work.Adapter info is BCM43XG [14e4:4329] rev 01I have installed driver bcmwl5.inf using ndiswrapper and ndisgtk.I had absolutely no success trying to use network manager applet so uninstalled it and went with Wicd instead which at least sees my SSID network with a strong signal.My network is encrypted using WPA and I entered the passphrase which seems to pass authentication but it keeps trying to get an IP address until finally it just tosses a failed message.I feel as though I'm really close but it just won't connect.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
I've installed ubuntu 9.10 using a minimal install and started from there installing the rest of the things I needed.
I'm running KDE4.4 and Wicd 1.6.1.
Problem is, wicd worked fine, but I don't know what happened before I got this annoying problem.
After logging into KDE, wicd asks me for my password in order to connect to the network-device. After filling that in, I get the message code...
As you can see in the logging, internet is working fine. I manually have to start wicd-client and I get an extra wicd-icon in the taskbar showing me the signal strength as it should do.
I've been searching a lot, but can't find anything about this, except a lot of people having the same errormessage, but they have some errors in the wicd.log too.
i just installed ubuntu 9.10 netbook remix on my acer aspireone ao532h netbook, and so far, it's been working beautifully. much better than the windows 7 starter edition that came with the machine. the only problem i've experienced so far had to do with the wireless connection. initially, the connection would drop during certain types of activities (e.g. downloading updates or programs, or even streaming videos videos) and the network manager would freeze so completely that i'd have to hard reboot. that seems to have been fixed by installing wicd (following a suggestion here: http://ubuntuforums.org/showthread.php?t=1135723&page=2), meaning that it hasn't disconnected in the several hours since i've been using it. however, wicd has a different problem: it disconnects after a suspend / resume cycle. this requires a reboot to fix also, as not only does it disconnect, but it looses awareness of the network altogether. obviously, this could be a real headache on a netbook that gets closed and opened frequently.
View 2 Replies View RelatedI had no luck with network manager and i was surfing the net and it said wicd was better so i installed that and installed 1.6.1 But it was not obtaining an ip address
So i searched again and ppl said that its a problem with 1.6.1 and they said 1.5.9 was better. So i installed wicd 1.5.9 and its still not obtaining an ip address.
The router is unencrypted no security, ppl suggested trying to set a security on it so i tried WEP and when i do that it gets stuck on trying to authenticate the key phrase.code...
Trying this on a Lenovo with 10.04. but after a few updates and some basic software (restricted extras) the network manager is missing. I tried installing WICD but that doesn't show up either. Going to the startup applications, it is listed and checked, and dragging it to the panel works, but clicking it does nothing.
View 2 Replies View RelatedI'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
I installed Enlightenment into my machine and, in the course of the installation, Network Manager was removed. I now have no internet connection. I've searched and tried a couple of possible solutions here but I cannot get them to work. When I try to use a downloaded deb file Gdebi cannot install it. It seems that if I re-install Network Manager I'll lose a lot of my Enlightenment installation. What I'd like to do is install Wicd. I dual boot with Win 7 so all is not lost. I understand that there's a way to istall Wicd from the command line without an internet connection but I cannot figure out how to do it.
View 3 Replies View RelatedI have an hp compaq 6720s laptop dualboot vista/ubuntu lucyd.My wireless card is Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02), controlled by wicd 1.7.0 (gnome network manager connects/disconects the net continuously).The problem is, any time I do a scanning with wicd or from command line to see the wifi nets around,my wireless is disconnected, then it connects again because is set to automatic reconnection
View 2 Replies View RelatedBecause of some glitches I've experienced with Knetwork Manager as of recent versions of Kubuntu I want to use WICD but I know they can get a bit botched juggling them around. I remember getting it right once using a wired connection ot install but would like ot be clear in advance of doing this tomorrow.
View 1 Replies View RelatedI use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies View RelatedI installed Ubuntu 11.04 and then I installed WICD using Synaptic and then uninstalled Network Manager. WICD worked fine until I rebooted. Then I could not connect at all. Wicd displayed the wireless lans and even authenticated OK. But wicd was not able to obtain an IP address.
View 1 Replies View RelatedI am getting "No wireless networks found" using Wicd manager. Below is some info that might help:
iwconfig
Code:
root@root:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code].....
I was using wicd on a spotty network, the house blocked a lot of the signal from moving around, so wicd was having major issues with that AP. Later I was trying to connect to another AP but wicd couldn't connect plus it was saying the spotty network's name was the one it was connecting to. Although I didn't try before I left/gave up I'm sure a restart of the wicd daemon would have solved it.
But why is this even the case? is there something I could add to the scripts that would clear this issue up? (I also submitted a bug on wicd's launchpad project but haven't gotten any response... I hope this isn't a 'feature')
Running kubuntu karmic, kernel 2.6.31-19, on Asus EEE PC 1000.
WICD 1.7.0. hangs on "wired connection: obtaining ip address...". I have downgraded to 1.6.2 and 1.5.9, but this did not solve the issue.
WICD does work under other circumstances, e.g. wireless connection. (But at home I don't have wireless, but just the modem and ethernet.)
Same wired connection ethernet connection works flawlessly on laptop running Windows XP SP2.
I'm actually running Debian Lenny and using WICD. Sometimes when I wake the system up from standby it reconnects me to my wireless connection, but sometimes it wont. (Same thing for hibernate). On the times that it wont work it just hangs at obtaining IP address.
View 1 Replies View RelatedI have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
View 1 Replies View RelatedI had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
View 1 Replies View Related
