I have a server running Ubuntu Server (Natty), originally I ran Ubuntu Desktop (Natty) and that worked fine especially since it already had the drivers for my Netgear WG111v2 wireless dongle. The server does not have this feature, I was wondering if their is a repo somewhere that has all the drivers included with Ubuntu Desktop for Ubuntu Server?
View 1 RepliesI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View RelatedI've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies View RelatedWhat I am trying to achieve is a similar system to how windows networks.I have a folder on my server (/var/www) and I would like to share it via NFS so that when the server is on a folder appears in the network folder of my desktop and I am able to add, edit and delete folders and files as my non-root user (ryan). So far I have managed to install the NFS server and client and configured /etc/exports as so
Code:
/var/www/ *(rw,sync,no_root_squash)
I have then been able to mount the folder to my client using:
/etc/auto.master
Code:
/home/server /etc/auto.server --ghost --timeout=60
/etc/auto.server
Code:
www 192.168.2.80:/var/www
This isn't what I want and I was still unable to add, edit or delete folders and files.
I'd like to put my new Dell desktop (Ubuntu 10.04 Desktop) on my home network in place of an old PC running Windows XP and acting as host for the network and server for printers, etc. Is the Server version required for this, and if so, can it install easily over the Desktop version?
View 2 Replies View RelatedI have been running 10.10 server with no GUI for a few months without issue. I decided to install ubuntu desktop (GUI), because I want to turn it into a media server, and I'm finding that my Internet browsing fails intermittently. i.e. I can get [URL] sometimes and sometimes not. I have tried traceroute and found that I do not reach my local router on addresses that fail, and yet I get a full trace on addresses that are ok. Ping tests too.I remember from some time ago that the GUI may cause a network problem but I'm not sure.
By the way, other computers on the network can access this host through Samba so the NIC is working fine.
I've noticed something strange in the behavior of how Ubuntu server obtains it's IP address versus Ubuntu desktop and other versions of linux and Windows. When Ubuntu desktop obtains an IP address from my router that address is retained from one bootup to the next, same behavior as Windows, SuSE, and pretty much any other OS. Ubuntu server on the other hand grabs a different IP address everytime it boots. At first I guessed it was a difference in /etc/dhcp3/dhclient.conf so I replaced it with the dhclient.conf from Ubuntu desktop but no dice, it still grabs a new address every time.
In /etc/network/interfaces Ubuntu server defines the loopback interface and primary network interface, just as it should but Ubuntu desktop does not define the network interface, only the loopback interface. I'm guessing something else controls does this. Desktop appears to be storing previous IP lease information in /var/lib/dhcp3/dhclient.eth0.leases but server doesn't, /var/lib/dhcp3/dhclient.leases is always empty and there's no other files in /var/lib/dhcp3/.
Apparently something isn't writing old lease info there. Without setting a static IP address, how can Ubuntu server be configured to retain the same IP address between boots like Ubuntu desktop?I'm using Ubuntu server 8.04LTS, Ubuntu desktop 9.10 & 9.04, SuSE 11.0, Linux Mint, Windows XP, pfSense 1.2.2 as router.
How to connect my newly installed ubuntu on my desktop at work to the company's server that is windows based. I have my user name and password given to me by my it office but they could not help me set up linux.
View 8 Replies View RelatedI had to do quite a lot of digging before I managed to work out how to do this. It turns out to be reasonably straight forward, and so here is my howto all in one place.
Objective: Connect to my Ubuntu (Lucid Lynx) Desktop machine (which does not have a screen or keyboard) using a remote desktop viewer and get my usual GNOME desktop interface. And have the desktop persist while I am not disconnected.
I have recently discovered one niggly issue with some of the keys being messed up. 'm' and 's' in particular? I am looking into it and will update this post when I have resolved it.
The following steps were performed on a freshly installed version of Ubuntu 10.04-desktop. Just for clarity:
Code:
Install a VNC server. There is a choice of servers I chose the "tight" one.
Code:
Setup your VNC password. This password isn't very important as my setup will only allow for connections via SSH, so 123456 is what I used. One can possibly disable it?
Code:
At this point or the first time you run 'vncserver' (I forgot to check) the all important and much discussed ~/.vnc/xstartup file is auto generated. This is the make or break place where you can either get GNOME over VNC or not. My xstartup which required NO changes was:
Code:
Give the VNC server a test, by running it from the command line.
Code:
Try connecting to the VNC server:
Code:
Ok if that all worked then great! It all did for me and my machine was fresh from the CD.
Now we setup the VNC server to run all the time. There are a variety of ways of doing this. Since this howto requires the use of a SSH shell one could quite easily run the vncserver (as we did above to test it) and then disown (haven't tested if this is actually required) commands the first time you connect. This would leave the VNC server running until you used the vncserver --kill command. This would be a suitable approach if you had many different users wanting to have VNC GNOME desktops.
For convenience in a single user setup we can get the VNC server to be started at boot time:
Code:
Make the contents of 'vncserver.user' (credits to some smart guy on some blog out there that I couldn't find again. and then I made a few improvements):
Code:
Well I guess the topic says it all. I've recently upgraded to Maverick from Lucid all went smoothly until i restarted and realized that the remote desktop server included stopped functioning all of a sudden. tried other vnc servers with no luck.
View 9 Replies View RelatedI am trying to set up a remote server on an old desktop that i have and i am running into problems. I have the packet installed but i can not get it to run. When ever I enter /sbin/service sshd start
I get Generating SSH1 RSA host key:[FAILED] and i can not for the life of me figure it out. Running fedora 12
For more than a year I was happily using my Fedora 11 remotely through VNC over ssh. I was using desktop 0 on port 5900 so people at the office can see what I am doing.
Yesterday I upgraded to Fedora 12, then 13 and then 14. I installed all updates of F14. All went well until I came to use this server from home as usual. The server was not responding.
I brought up /etc/X11/xorg.conf from a backup tape because I discovered that it is there that screen 0 is set and not in /etc/sysconfig/vncservers and rebooted. No success!
At the command lsof | grep LISTEN, I could not see a listener on port 5900
I activated screen 1 on port 5901 and I could log in OK and with lsof I could see listeners for ports 5901 and 6001 but I need screen 0!
During the day I tried many things including removing the vncserver packages with yum and re-installing them, removing the .vnc folder in the user home folder and starting from scratch. The server is still refusing connection!
I have followed the official instructions here to setup VNC service initially and was able to get it working.
However, during the course of setting up my BIND service, I have done the following:
1) Turned on SELinux
2) Used system-config-security to add the ports TCP:53 and UDP:53
When I tried to save the settings from 2) above, my GNOME desktop delivered via VNC got frozen.
Now when I tried to restart vncserver with "service vncserver restart", I see the following. I am also unable to connect via [url] anymore.
Code:
I'm trying to enable the Nvidia drivers so I can use the Desktop effects and play games but when I go to Systen -->Administration-->Hardware drivers It say that There are no proprietary drivers in use. install the Nvidia driver?
View 2 Replies View RelatedI have a Sapphire HD4850 X2 1G GDDR3 PCI-E graphis card, and presently I ruin a Windows 7 OS, but am moving to Ubuntu GUI Desktop, and was wandering where I could get Linux drivers for this card (and they are NOT available from the Sapphire site), or how I could get Windows drivers to work with this card, I do have 4 monitors using this card so I need the drivers and ability to use 4 monitors.
View 2 Replies View RelatedI created a lab of 15 PCs connected to a server using samba. Everything works fine, but it's possible put a link on the desktop that points directly to the shared folder on the server?
View 2 Replies View RelatedI just remotely updated my uncle's Ubuntu 10.10 desktop to 11.04. My uncle has no computer skills, so it is very important that I troubleshoot his problems using VNC. After completing the 11.04 upgrade, I was not able to connect to him via VNC. After some fiddling around I was able to connect by turning off the confirmation option in the Security section. We are now using the password security option. The problem is that my uncle does not have any security against my peering eyes.
I tried reinstalling Vinagre, but that didn't help. Is it possible to get the confirmation option working again somehow?
Is there a download link for Vinagre 3.01 (deb)?
Well the Screenie explains most of it.I had trouble update my drivers but i finally did but now I cant use my compiz effects like I did Before I enabled the drivers.
View 9 Replies View RelatedI just installed Ubuntu 10.04, it was all working like a charm until y tried to install nvidia's propietary drivers using the integrated hardware drivers manager. Now ubuntu just boots into a non graphical tty. How can i fix Xorg?I have an AMD Athlon X2 5200+, the chipset is a nForce 430 with an integrated Geforce 6150.
View 1 Replies View RelatedI am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:
1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation
[code]....
When I activate the nvidia and restart, the desktop disappears. I have tried re-installing Ubuntu and mint and it keep happening. The computer is has a single core amd athlon 64, 1.5gb's of ram and a nvidia 7300gs card.
View 9 Replies View RelatedI just got a free Ubuntu 9.04 desktop cd in the mail today, but I'm already having a problem.
I'm using Ubuntu 9.04 Desktop 32 bit. I need graphics drivers for playing video games such as Nexuiz. My graphics hardware is in ATI Radeon X1200 series. The fglrx driver I downloaded from ATI does not install.
When I use code...
I am not certain of the cause (it may have been after I updated my ATI video drivers, or instructed my system to use a dual-head configuration, which in hindsight was perfectly dumb) but regardless of the reason--now when I "startx" my monitor freezes with a few stray motionless pixels. Nothing I've done helps: tried "sax2 -r -m 0=fglrx"; tried "aticonfig --initial"; tried to revert to an earlier xorg.conf; but I don't really know what I'm doing, so I hope someone who far surpasses my knowledge of SuSE on the command line can help me out.
How do I get my desktop back?
Well, wouldn't you just know it? I encountered problems when upgrading from 9.10 to 10.04 with update-manager. What a surprise. Anyway, here are the problems:1. Cannot enable desktop effects. Error appears after searching for drivers.
2. 2-3 minute boot times. Used to be 40 seconds. It spends 2 *minutes* in the BIOS before actually starting Ubuntu.
3. The volume controls on my laptop's keyboard now control PCM rather than Master, so everything is horrifically loud past three clicks, and two quiet under that.
4. The bootsplash displays at 1280x800, my monitor's resolution, and looks pretty. The log in screen, however, switches to what looks like 1024x768. When I log in it changes back to 1280x800.
5. Cannot boot into Windows from grub. When I select Windows, a blinking cursor appears in the top left corner and stays there. Nothing happens
I am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.
When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!
I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.
What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?
After installing ubuntu 64 bit, I installed all my updates and installed the current nvidia driver for my 9800 GTX+ from the additional drivers page. After restarting my computer, ubuntu boots into text mode. I used google and found out a couple of commands like:
After i hit control+alt+f7 it hangs on checking battery state with NO ok to the right of it. after running sudo apt-get --purge remove nvidia -current and restarting the computer, the boot hangs on the ubuntu screen everytime.
My specs are:
Core i7 860
4 GB of ram
Nvidia 9800 GTX+
I have a nVidia GeForce4 MX 4000 graphics card. How do I install the updated nVidia drivers so I can use the desktop effects in KDE?
View 5 Replies View RelatedI didn't post this thread in the hardware section because I got my ATI propitiatory drivers installed successfully and my problem seems to be with KDE. I'm trying to enable Desktop Effects for KDE.
The story is that ATI drivers installed correctly but when I go to "Application Launcher" => "System Settings" => "Desktop Effects" I can't enable Desktop effects and it has the following message:
"Desktop effects are not available on this system due to the following technical issues:
Required X extensions (XComposite and XDamage) are not available."
First of all I don't really know what this means. I have done some Googling around and have found a few places suggesting that I should enable the "Damage" and "Composite" extensions in my xorg.conf. I have done that, as you can see in the attached Xorg.conf file. It still doesn't work.
I'm new to OpenSuse. Just installed it in my laptop.. Overall a great distro, I'm just getting trouble with some video aspects. I'm currently using the open-source radeon drivers. However, I can't activate desktop effects (ok..) and video playback looks choppy (sucks, I get like 3 fps). I've already tried some solutions, like installing fglrx driver (which makes my X system buggy) and trying to manually enabling DRI in xorg.conf (which didn't work).
My laptop GPU is an ATI Mobility HD5650.
Currently running OpenSuse 11.3 using KDE Desktop and radeon drivers.
Here's some of the result from my glxinfo (using auto-configured xorg, i.e., no xorg.conf):
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.4
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 1.4 (2.1 Mesa 7.8.2)
I have been trying to install Linux on a olsish computer for a long time now, with no luck :[ Everything goes fine until Ubuntu/mint asks me to activate the nvidia drivers. When I do it and restart and login the there is no desktop. The computer has a single core amd athlon 64, 1.5gb's of ram and a nvidia 7300gs card.
View 3 Replies View Related