Hardware :: RT2860 In Fedora 12 With EEEPC 100H Not Working?
Jan 1, 2010
Target : to make wifi card working on EEPC 1000H
Problem : RT2860 card is not working
Question : how to make it works? what are the next steps ?
Steps :
1. Fresh installation of Fedora 12 from USB keys + remote FTP server : installation is ok
2. Update the system :
Code:
yum update
3. Add repository :
Code:
[URL]
4. Add the RT2860 :
Code:
yum install rt2860
[code].....
View 3 Replies
ADVERTISEMENT
Feb 2, 2010
I had a problem with using ndiswrapper to install Windows driver on Netgear WN511TA wireless adapter card. Problem solved by replacing Netgear WN511TA with Airlink101 AWLC6080 PCMCIA wireless adapter to work in my triple-boot XP Pro/Ubuntu Karmic/openSUSE 11.2 Toshiba laptop and using the latest Linux driver version 2.3.0.0 dated January 29, 2010 from Ralinktech site. I followed driver instruction in a Ubuntuforums tutorial (Howto: Ralink RT2860(m) PCI(e) RT2860...on Intrepid).
I am wondering if I can use the same Linux driver (RT2860sta) for openSUSE 11.2 on my triple-boot XP Pro/Karmic/openSUSE laptop, ie. copying over instead of building and compiling driver from source again, because I don't quite understand the build instruction given in the README file of Ralink's Linux driver file. Specifically, I don't know how to "define the GCC and LD (?) of the target machine, and define the compiler flags CFLAGS(?), modify your need (?)", etc. I already have gcc, cpp and make installed on the Ubuntu and openSUSE parts of my machine. I did try ndiswrapper in openSUSE but it doesn't work for the Windows version of the latest Ralink driver (error: invalid driver rt2860.inf).
View 9 Replies
View Related
Aug 10, 2010
Desktop PC with Trendnet TEW-642 PCI wireless N adapter (Ralink 2860 STA driver). Running openSUSE 11.3 X8_64 with KDE 4.4.4. Software Management and KNetwork Manager both identified rt2860STA as installed. However, KNetwork Manager's authentication window keeps popping up every few seconds and I cannot get wireless.
1) uname -r:
Code:
2.6.34-12-desktop
2) /sbin/lspci -nnk:
Code:
03:06.0 Network controller [0280]: RaLink RT2800 802.11n PCI [1814:0601]
Subsystem: RaLink Device [1814:2860]
Kernel driver in use: rt2860
3) dmesg:
Code:
[ 6.270671] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.275290] alloc irq_desc for 21 on node 0
[ 6.275294] alloc kstat_irqs on node 0
[code].....
I have downloaded and extracted the latest rt2860.bin file from the Ralinktech website to Desktop but even as root I cannot copy it to /lib/firmware or replace the existing rt2860.bin file in /lib/firmware.
View 9 Replies
View Related
Feb 20, 2011
ubuntu --> debian --> ubuntu --> debian --> fedora --> ubuntu netbook remix --> kubuntu --> lubuntu --> arch --> debian testing --> ubuntu --> debian testing (with different GUI LXDE, GNOME, KDE, ENLIGHTENMENT) --> Linux Mint LMDE --> PCLINUXOS --> ubuntu (different GUI's again) --> Debian testing --> Debian Sid with APT pinning.
I still consider myself a linux newbie so if there is anything that seems misleading or incorrect please let me know.
Some history: Normally my wireless worked out of the box with ubuntu (2.6.35) with minor hiccups and few disconnect issues.
In debian testing (2.6.32) all i needed to do was install the firmware-ralink_0.27_all.deb package and it would work properly.Today I noticed that there was a kernel upgrade from 2.6.32-5 to 2.6.37-1 available in Sid. I upgraded the kernel everything works properly but my wireless would not connect. I use gnome with network manager. Network manager would list all available wireless networks but not be able to connect with wpa/wpa2 security. I noticed that network manager was using the rt2800 driver which does not work properly with my wireless card. It also seems that kernel 2.6.37 removed the rt2860sta driver reference from its "source".
When i was using Ubuntu Maverick with kernel 2.6.35 i noticed that network manager would use the rt2800 driver. Normally I would be able to connect but every so often or after the computer would "sleep" I would not be able to reconnect to a wireless network without rebooting. I found this post on the Ubuntu forums that describes how to compile the driver from source and problem solved: http://ubuntuforums.org/showthread.php?t=1476007 I will for the most part, copy the steps that Sven6210 describes and modify for the debian kernel 2.6.37-1
Things needed before proceeding :
1.Gedit text editor program or alternative
2.Have gcc (The GNU C compiler) installed
3.These steps assume the system is configured with sudo, please make appropriate modifications tailored to your system.
4.Be not afraid of the command line.
[code]....
View 3 Replies
View Related
Jun 1, 2011
I just installed Debian after I became fed up with Ubuntu. I'm trying to get my wireless card to work so I can move my computer back to it's proper place. Right now I have to put it right next to the router so the Ethernet cable can reach. Anyways, I've had trouble with this card before, so I did a quick google search. I found this: [URL]. I followed the instructions, and the thing at the top of the panel shows a list of wireless networks. When I try to connect to mine, it asks me for authentication. When I give it authentication, it idles for a while before asking me again.
Here's some system information:
uname -a
Linux max-pc 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux
lsmod | grep rt2860sta
rt2860sta 454573 1
crc_ccitt 1323 1 rt2860sta .....
From what I recall, when I used Ubuntu it was called ra0. Could this have something to do with it?
View 3 Replies
View Related
May 2, 2010
I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
View 4 Replies
View Related
May 30, 2010
I have a problem with my RT2860 in my Eee PC 901 running F13. It connected fine in F12 when I installed the akmod-rt2860 driver. I enter my WPA key, then it tries to connect, but the WPA key screen appears again saying that I may have typed in my WPA key incorrectly. However, I checked and it is the right WPA key.
View 5 Replies
View Related
Jan 27, 2011
I've been through a few versions of Slackware on my Asus EeePC and I must, despite that fact that every has been having lots of trouble (or so I've heard) configuring Linux on it, it hasn't been all that bad for me. One problem that continues to persist is that the brightness setting is weird. It doesn't like to display on full brightness most the time, and when I try to change the brightness (function keys or OS function), it goes through 3 'mini-cycles'.
I've tried the Alien eeepc-acpi-scripts slackbuild a while back and it didn't work for me before. While searching for another solution, I found this thread on the Ubuntu forums: [URL]. But the major fix that seems to be working for them involves editing GRUB (which I don't have). Another post suggests simply updating the BIOS, but the BIOS updater is a Windows executable, and I'm not quite sure how he pulled it off in Linux.
View 1 Replies
View Related
Jan 16, 2011
I recently installed F14 on my EEEPC 1000H. Fedora is the distro that fully supports it, at least F13 (with the wireless drivers installed seperately). I noticed that F14 worked totally out of the box, without even having to install wireless drivers. However, there is a problem: If I turn off the wireless (using Fn + F2, I haven't tried any other ways) I then can't turn it back on. I mean, the lights indicating the wireless is working are on, Fedroa still says "Device is not ready".
View 1 Replies
View Related
Nov 19, 2010
Installed on a FC13 PC and FC14 EEEpc.The Patch as outline below.I used the Terminal and su - to install in Root and Dolphin Filemanager to install in /home/.bashrc.I can't get over how I can play TV over the Internet on a EEEpc with very little or no hesitation.
View 1 Replies
View Related
Dec 31, 2010
F13 on a EEEPC 1000HD.I have big problems with my wireless card. lspci says:
Code:
01.00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
I can't use Network Manager (it continue to ask me for the WPA password9. So I stopped it and I use command line, following this: [URL]
From the log I can see that it tried to associate to AP and after a lot of tries: it connects BUT the connection is really SLOW and UNSTABLE! (pinging hosts on the same network gives me about 50% packets loss) I am worried about this entry in the log:
Code:
ath5k phy0: unsupported jumbo
I am going to try to install madwifi, but before that I'd like to have your opinion and listen your experience! I see a lot on infos about ath5k, but I'd like to be pointed to the right direction!
View 6 Replies
View Related
Mar 12, 2011
On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
View 3 Replies
View Related
May 13, 2010
I can't use my wireless card in slack 13.1 (slack64-current). Looking at the dmesg output I saw that the firmware was missing, so I download it from ralink website.After this I was able to up it with ifconfig. I also was able to see my network with wicd, but after connection I can only transfer very few packets and network becomes unresponsive, no traffic.In slack64 13.0 this same card works fine. I don't even need to install a firmware. how I can make this work in slackware64-current?
View 6 Replies
View Related
Sep 4, 2010
I use a Ralink rt2860 wireless PCI-Card Debian Squeeze. It worked properly til the last update, since that I can not use any commands with iwpriv: biaaas:/home/biaaas# iwpriv wlan0 driverV wlan0 no private ioctls.
I reinstalled the firmware package und unloaded/loaded the rt2860sta module, but that didn't help. Also the settings in /etc/Wireless/RT2860STA are ignored. The card somehow works I can see neigboring WLan-networks (all at 2.4GHz), but I use 5GHz because there are too much networks around.
View 5 Replies
View Related
Jul 2, 2011
I've been snooping around on the forums for a couple of hours now looking for a straightforward guide to installing custom wireless drivers. I have a new Airlink101 AWLH6075 wireless card (and no ethernet connectivity.) The Linux drivers are the RT2860 Ralink drivers in a .tar, which I have on a different computer.
So -- I'm on Server (command-line only), 64-bit, no working internet. Btw, the wifi card works fine on my alternate boot of Windows. wlan0 (wlan1?) is not detected during installation.
So, I know I need to:
1. mount the usb drive I'm storing the file(s) on
2. put those files in my local Linux directory
3. somehow install them
4. (disable my old ethernet connection?)
5. enable my new wlan0 and set up dhcp and the WEP login.
[Code]...
I would greatly appreciate any help I can get with any of these things. I don't even know how to mount a USB stick in command-line... but obviously the internet connectivity (and thus driver installation) is the major issue here and I can find out most of the other stuff on my own.
View 9 Replies
View Related
Feb 1, 2011
I went out and purchased a Sabrent PCI wireless 802.11n card with the RT2860 chipset because it was on the ubunutu compatibility list and has linux driver available from the manufacturer. I was impressed that the card worked in wireless G mode out of the box, which is a great start....
However, I can't find any wireless N networks. Dual booting I can find/use my N network, but in ubuntu I can only find my G network. This is somewhat frustrating because I bought this card and a new (read: expensive) Linksys E3000 router specifically to run a nice new N network...
I have downloaded, made, and installed (reboot) the latest driver from the manufacturer, but it still won't find any N networks. I found a few posts by searching here and google that alluded to changing this line: "HT_OpMode=1" (from 0 to 1) in the config file RT2860STA.dat located in /etc/Wireless/RT2860STA/ and a reboot. It didn't work for me.
Frankly all this rebooting is starting to **** me off ... I have spent most of last night trying to setup my 180$ wireless network and its still no better than the freebie DDWRT54g based wifi it replaced. I am frustrated, perhaps someone wiser in the ways of ubuntu and wireless N can shed some light on the situation....
I forgot to mention I am on Karmic Kola, amd64 with the standard gnome.
View 3 Replies
View Related
Feb 5, 2011
Just built a new computer and I think I somehow need to activate my wireless card to get it working.The hardware seems to show up. I get "Wireless Networks" in my network manager but it is grayed out and says disconnected. I think it is an easy fix I just cannot find it.
[Code]...
View 4 Replies
View Related
Jun 26, 2010
I have a WS- something or other by gigabyte, it has the "ralink rt2860" chipset according to lspci.
It works well the only problem is in kismet or airodump-ng the power always shows as 0.
In the kismet.conf i had to set the source to rt2500, it does not seem to like rt2860 or rt2x00.
In airodump-ng it always says "chipset: ralink 2560pci" and "driver:rt2500"
Is there any way i can use the rt2x00 drivers, would they allow for more things ?
Whats funny is that network manager can see the signal strenght of all the sources.
View 2 Replies
View Related
May 8, 2010
After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.
After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?
View 9 Replies
View Related
Mar 8, 2011
In order to get my Wireless card working Add-on: [URL]..The wlan card is working fine except I have a huge amount of logging info in dmesg/syslog
[Code]...
View 1 Replies
View Related
May 16, 2011
I recently upgraded my Zepto laptop to Natty (11.04), and unfortunately the wifi no longer worked. I have a WPA net, and the combination with a Ralink chip seems unfortunate - judging from the number of internet posts.After browsing loads of threads on the 'net I think I have found a solution for 11.04 - it will work out of the box in 11.10 !
1) Add "blacklist rt2800pci" to /etc/modprobe.d/blacklist.conf
I think this makes the wifi stuff work as I can then do "iwlist wlan0 scan" and get reasonable output. But there is no integration with the Network Manager. So I have also done this (again, with inspiration from a few threads):
2) Edit /etc/NetworkManager/NetworkManager.conf - change the "managed=false" under "[ifupdown]" to "managed=true".
You may have to do a "service network-manager restart", restart or similar to get it going.It also seems I can suspend and get a wifi net connection upon wakeup.
View 1 Replies
View Related
Jun 30, 2011
My wireless download rate is absurdly low (0.3 mbps) compared to a faster upload rate (1.5 mbps). My girlfriend's laptop running windows gets much higher download rate (20+ mbps).
View 8 Replies
View Related
May 6, 2011
I've been happily using this lappie with LTS but wanted to try out 11.04. It looks great but wireless has been an issue:
1. No wireless during install
2. Had to manually blacklist the rt2860pci etc modules
3. Wireless still not resuming after suspend
05:00.0 Network controller: Ralink corp. RT2860
Subsystem: Ralink corp. Device 2790
Physical Slot: 0-2
Flags: bus master, fast devsel, latency 0, IRQ 18
[code]...
The latter manual mod improved things slightly but still no cigar
View 7 Replies
View Related
Dec 11, 2010
Heres the background: Im running 10.10 desktop on an Asus EeePC. Ive managed to rectify most common problems, but it will not mount a USB. It does not come up in the places menu - I have to manually mount it in the terminal.
However, i can only READ the documents, i cannot edit or save documents to the USB disk - it opens ion read only mode. (Im using open office 3.2 by the way).
I have tried doing this with a new document. It will not save, it is saying the location does not exist and cannot mount the USB. I know this is a mounting USB problem exclusively as it will save documents and allow me to edit them from the home folder, the desktop and the documents folder.
View 5 Replies
View Related
Sep 28, 2010
i just installed debian on my base unit and now i would like to install debian on my eeepc 1005ha.
what debian supports the ath9k wireless?
also can i down load an installer iso and unetbootin the usb to intstall from the stick?
View 9 Replies
View Related
Aug 6, 2010
I'm trying to recover a lost partition from a faulty SSD . I've used Linux last time, hence I'm a bit rusty. Still I'm trying to recover a damaged SSD filesystem on a eeePC 900 of a friend of mine ...Here are the details.
Asus eeePC 900
- 4GB primary SSD (OS is installed in here and works fine)
- 16GB secondary SSD (this one is faulty; after a few weeks of problems this friend of mine made some sort of system restore, but Linux couldn't use it correctly and trashed it away with all of it's data ... he couldn't explain it better to me. I'd like to recover the files from within this SSD)
Here's what I did on the eeePC:
1) fdisk -l
Disk /dev/sdb: 16.1GB, 16139354112 bytes
...
/dev/sdb 1 1962 15759733+ 83 Linux
[code]......
I'm trying to find out the right words without generating any inflammatory answers from the community ... I currently kinda have only a Windows Seven installation available to work with ...
If you're still with me I add a few more details. That's all been done on the Win machine.I've managed to load the sdb.img file with Gizmo (it's a little software that mounts img files). Gizmo couldn't load the sdb1 partition inside of it but ... another program called PhotoRec managed to access the mounted disk, found the ext3 partition inside of it (gave me a few errors though) and successfully recover a lot of files :-) Well, a lot, not all of them, and not every recovered file was good That's a first improvement, that tells me sdb.img actually contains valid data even if only partially valid. I don't know if PhotoRec is to be blamed for the failed ones or the SSD image file did not contain enough valid data to let PhotoRec do a good job.
Now I would go back to Linux. I'm well aware that Linux has more potentials than Windows when it comes to handling disk images, loopback devices and so on; but, as I already said earlier, I'm a bit rusty.I'm willing to make a fresh installation of Linux (maybe Ubuntu) on a spare harddisk in order to get full advantage of that and dig deeper but I need directions when it comes to recover that lost partition. I'd like to try and recover the entire partition (not only a few files), maybe rebuilding the ext3 superblock or whatever.Here I'm lost, I don't know what has been developed in the last years regarding partition recovery in Linux, what tools are available, which forums deal with such techniques, I'd like to be pointed in the right direction.
View 6 Replies
View Related
Jul 23, 2010
I have recently bought an ASUS Eeepc 4g and i am having trouble trying to run/open jar. files. As i am only 14 Years of age i am having quite a time trying to sort out this problem.. i have opened the command console and tried all the codes to try open or create shortcuts to try open and run a jar.file but i am not succeeding, if you can help me please write back on this post giving me a step-step plan on how to fix this! and if so then great would make my life alot easier on this laptop. and by the way i need to try open this file called rsbot v1.23 as it is a jar.file i am unable to run or open it by saving to the disk.
View 14 Replies
View Related
Jan 26, 2010
I have an EeePC 701SD running Linux that I use for Uni assignments mostly. Recently, there were some issues with it so under advisement I reset the EeePC to its factory settings and reinstalled everything. Since then, I have been having problems with my documents through openoffice and was wondering if this was an openoffice problem or something else entirely.
If I save documents, I cannot open them again. I get a little pop up box if I open openoffice and go file/open that asks me to put it in Unicode. If I choose the file from my documents, it opens in texteditor, telling me it is a binary file and to save it will corrupt it. Neither option actually gets me my file; openoffice gives me lovely little squares, and texteditor gives me the # symbol.I cannot open the documents on Windows either.
a) what is going on,
b) how I can resolve it, and
c) how I can fix my documents (important, uni documents!!)
View 7 Replies
View Related
Aug 23, 2010
I am running Debian on my eeepc, and whenever I move the display while my computer is on, it often restarts. It turns off at a specific place on the hinge.
View 4 Replies
View Related
Jul 6, 2010
For a long time, on my netbook Asus EEE pc1000 working fine with my wireless (connecting WEP, WPA). Running with kernel 2.6.29 + rta2860sta v2.2 (package downloaded from the software repository , a user repository)
After somes updates (kernel mainly), all stop working. So I recompile the module v2.2 but don't work. I download from the ralink site the last version , recompile and installed , and appear work fine, but I don't know why the opensuse like to be very annoying and the knetworkmanager don't recognize the device. So , again I download a package from a user repository with the version 2.3 , what appear starts working again. Knetworkmanager recognize the device, but isn't cappable to connect in a WEP network. With WPA works fine.
If I disable the device in knetworkmanager and try configure manually , sometimes work. Probably have some sequence of command what I don't figure out what is. To configure WEP network before this problems I always use only the "iwconfig" command. But I try with "iwconfig" and "iwpriv" and don't work. So , afiter trying a lot of sequence, now I got connected to WEP network, but is very weird how they show this connection,
[Code]...
View 2 Replies
View Related