CentOS 5 :: Using Eeepc 1000 There Is Random Sustained SSD Access
Nov 18, 2010After about an hour of using my Eeepc 1000 there is random sustained SSD access. How can i check what is accessing the SSD so much?
View 3 Replies
ADVERTISEMENT
Ubuntu Networking :: EeePC 1000 HE Wireless Not Working / Why Is So?
May 2, 2010I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
CentOS 5 Hardware :: Disk Write Performance Sustained (200 MBs)
Oct 27, 2010I am experiencing disk write performance issues and I cannot find the cause. I have LSI-9211-8i SAS 2 controller (latest firmware), Centos 5.5 latest x86_64 kernel (2.6.18-194.17.4.el5 #1 SMP with latest LSI driver v. 7.00 datet Jul 27) and Seagate Cheetah ST3600057SS drives. These drives have a std write performance (sustained) of > 200MB/s (and read as well); with Fedora core 13 (same machine), issuing a dd if=/dev/zero of=/dev/sdo bs=1024k count=16384 (16 GB direct device write), gets normally to 213 MB/s (repeated retries). On Centos 5.5 I am getting speeds around 110/113 MB/s.
iostat does not show anything specific (just 1.3 % wait, CPU 99.7 idle).
There are 14 drives: tried with several of them, same figures. Reads go around 200 MB/s.
General :: How To Access TrackPad Device In Eeepc
May 24, 2011I am on an Eeepc running Ubuntu and I am trying to store the raw data from the Eeepc's inbuilt track pad in a file.To do this with the keyboard (as root) I wentcat /dev/input/event7 > ~/raw-keyboard-out.dataThe result was the whole bunch of random-looking data I was hoping for.Now I want to do this for my mouse, and I tried all of the 'files' in this folder in an analogous operation and none of them seem to stream the input into a file.Does anybody know what the name of the TrackPad/mouse device is called in the /dev folder for an Asus Eeepc 1001p?
View 1 Replies View RelatedUbuntu Installation :: Files Owned By User 1000 - No Access
May 25, 2010Running 9.10 now, I'd like to do a clean install of 10.04 on my dual-boot (with XP) Compaq notebook. As a test, I burned an ISO image onto a 1-GB stick and booted to 10.04 from it. It works just fine, except that the directories in the Documents folder on my hard drive are owned by "user 1000", and "he" grants me access to only about half of them.
Is this problem likely to persist if I actually install 10.04 rather than just running it from the stick? If so, what can I do about it? Second question: am I correct in understanding that if I still need to access my Ubuntu partition from XP, I'd better stick with ext3 for this install rather than going to ext4?
Ubuntu Networking :: Cannot Access Internet With Asus Eeepc 1015p
Nov 18, 2010i've just installed ubuntu netbook remix 10.10 on my asus eeepc 1015p. whether i use an ethernet cable or wireless, i can establish a connection, but i can't access any websites through firefox or get software via the software manager.
i've attached some terminal screenshots from my attempts at troubleshooting, which i think contain all the relevant hardware info.
i've already searched the forums and see a lot of problems similar to mine, but none seem to involve the same combination of hardware / ubuntu version as me. since i have no experience, i'm hesitant to try to apply solutions that i don't understand and in which i'm not totally confident.
CentOS 5 Hardware :: Hp Photosmart 1000 - Where To Get The Printer Drivers
Feb 26, 2010I want to install hp photosmart 1000 printer on my centos 5.4 but i dunno where to start. where I can get the printer drivers and how to install it and possibly share the printer?
View 1 Replies View RelatedUbuntu :: Sustained HDD Writes After Formatting?
Jun 7, 2011I'm seeing sustained disk writes of about 2 MB/s in the indicator-multiload indicator in Unity. I determined that it is writes on my 500GB HDD on /dev/sdb. This behaviour started after I used Gparted to create a single 500GB ext4 partition and also selected that it should be formatted to ext4 in Gparted.
Is this usual? It also survived a reboot.. I assume that it is the full formatting taking place in the background?
I saw no activity using pidstat or iotop. Only using vmstat -d revealed the writes.
General :: Configure 1000 Base T Ethernet Card To Send At 1000 Base T?
Sep 22, 2009I have a router that is 1000 Base T and two computers each with ethernet cards that support 1000 Base T. All are equipped with Cat 5e cable. Before I had a router that only went up to 100 Base T and I would setup one box with linux running proftpd. On the other box,I would use win xp pro and use firefox to ftp into the other box and download a file. Download speeds went up to 11.2 MB/sec. Now when I switched routers, I expected something like 120 MB/sec but I'm only getting 5.3 MB/sec. What do I need to change?
View 12 Replies View RelatedUbuntu Security :: Random Outside IP Trying To Access Remote Desktop
Jun 5, 2011I was sitting watching a TV show on the internet (streaming from channel 4) and all of a sudden I get a request from an unknown IP address, outside of my local network attempting to access my ubuntu desktop, I obviously declined straight away and stupidly didn't take note of the IP I've checked my firewall settings and no ports are being forwarded, everything is as it should be. I am running Ubuntu 11.04, and a little bit concerned. As of now I have completely disabled remote desktop on my laptop.
View 1 Replies View RelatedCentOS 5 Hardware :: Wireless - Intel Corporation Centrino Wireless-N 1000?
Jul 12, 2011I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
CentOS 5 :: 5.3 Random Restarts ?
Apr 19, 2010Where a CentOS 5.3 installation on a server randomly restarts. The problem is that I am not able to find a viable solution. I have updated the system to the latest available kernel, but to no avail...
The output I see in /var/log/messages when the restart occurs is very similar everytime:
...remainder of system boot logs
CentOS 5 :: Random Kernel Panics / Correct It?
Jul 8, 2009I'm running CentOS 5.3 x86_64 on my laptop (dell vostro 1400, core2duo, 3GB RAM, intel 3945ABG wireless, nvidia video and LAN). The problem is that some times (like 15-20% of times) I shutdown the laptop, I get a kernel panic related always to the wireless kernel module (I haven't been able to get screenshot or anything). I'm using the latest centosplus kernel. I never get these panics with the standard CentOS kernel, however the standard kernel doesn't light the wireless led, and that annoys me a lot. Therefore I'm forced to use centosplus kernel. The question is not how to solve this (i know I've not given enough details) but what to do to diagnose better the cause of the panic and then correct it.
View 3 Replies View RelatedCentOS 5 :: Getting Error Message And Random Hangs / Fix This?
Oct 2, 2009I recently installed CentOS 5.3 on a Dell PowerEdge 1800 server that used to have Microsoft Windows SBS 2003 on it. Everything seemed to be going fine until a few days ago. Here's the sum of it all...
- System seems to randomly hang, at which it becomes unavailable on the network (can't be pinged, monitor won't come back on, and you can't wake it up... have to reboot, the scroll lock and caps lock keys flash at the same time)
- Received this error message...
Uhhuh. NMI received for unknown reason a0.
You probably have a hardware problem with your RAM chips.
Dazed and confused, but trying to continue.
...it doesn't crash at this point though. I ran memtest86 twice and did not experience any problems. I updated the BIOS to the newest version, which contained a few bug fixes, but still experienced the same problems
CentOS 5 Server :: Postfix Random Delivery ?
Apr 13, 2011I configured a Postfix Server to relay the messages to an Exchange Server. To keep it simple I configured all my users locally and I setup local .forward files in their home folders, specifying their local Exchange address.
Everything seemed to work fine (for years now), until I upgraded postfix in October, 23rd 2010.
Alas, lately I noticed that, since then, even if I just realized it now, sometimes the server seems not to use the .forward file and tries to use the local delivery using cyrus, which does not find a local mail folder (obviously, since I never created them as I didn�t want to) and replies to the sender with a "550-Mailbox unknown" error. Today I enabled the "-v" mode for "local" in master.cf the debugging the problem a bit better, to see what's the problem.
If I was sure about the problem being the postfix version (2.3.3, which is way too old now!), I'd give it a try and substitute it with the latest 2.8.2 (even if the server is a production server and is almost untouchable).
Following the error and my main.cf and master.cf setup files:
CentOS 5 :: Unable To GCC Compile Any Stuff - Random Errors
Jan 24, 2009I am new to CENTOS (5.2) and more importantly new to linux. Any time I try to gcc compile something, it always throws random errors. I yum installed development-tools which is what I have seen other threads suggest but that did not solve the issue. I still get the same errors. I cannot find a common error among the many things I have attempted to compile.
Here is my most recent file for an example made when trying to compile up-imapproxy :
gcc -g -O2 -I. -I./include -c -o src/icc.o src/icc.c
gcc -g -O2 -I. -I./include -c -o src/main.o src/main.c
src/main.c: In function "int main(int, char**)":
src/main.c:618: error: invalid conversion from *void* to *void* (*)(void*)
src/main.c:618: error: initializing argument 3 of int pthread_create(pthread_t*, const pthread_attr_t*, void* (*)(void*), void*)
src/main.c:646: error: invalid conversion from int* to socklen_t*
src/main.c:646: error: initializing argument 3 of int accept(int, sockaddr*,socklen_t*)
src/main.c:675: error: invalid conversion from void* to void* (*)(void*)
src/main.c:675: error: initializing argument 3 of int pthread_create(pthread_t*, const pthread_attr_t*, void* (*)(void*), void*)
make: *** [src/main.o] Error 1
CentOS 5 Server :: Random Auto Rebuild Of Software Raid ?
Jan 16, 2010I have set up a software raid 5 and a software raid 1 on the same 3 disks.
But my problem is, every couple of days the software raid starts automatically resyncing. This resync is always succesful.
I do not know why this happens, any ideas to troubleshoot this further? I can not see an error in /var/log/messages
Ubuntu Multimedia :: Copy Random Jpg From Random Folder
Jan 19, 2010I'm looking for a script that copies a random .jpg from a random folder in my ~/Pictures folder to my ~/temp folder with a standard filename. This file will then be displayed in Conky. I can fix the last part, but I cannot find a way to do the first part.
View 3 Replies View RelatedCentOS 5 Networking :: Reboots Causes Unpredictable Enumeration Of Ethernet Drivers Causes Eth0 To Be Random?
Mar 20, 2009I have several systems experiencing this issue, but the "worst case" system at the moment is a system where there are 2 dual-port PCI-X e1000 cards, and two on-board e1000e PCI-express card.What happens is maddening. If the /etc/sysconfig/hwconf is removed, and kudzu is not run, and the 6 interfaces each have a corresponding script:
/etc/sysconfig/network-script/ifcfg-eth0
/etc/sysconfig/network-script/ifcfg-eth1
/etc/sysconfig/network-script/ifcfg-eth2[code]...
Now what happens defies explanation. The only way I can be sure to make the e1000e first-listed-in-pci-order e1000e device always eth0 is to remake the initrd and add e1000e to the initrd.If I do not do that, eth0 might be the onboard night, it can also be the first port on either of the dual port cards.So eth0, eth2 and eth4 all take turns being eth0. This was not an issue in the EL-5.1 timeframe. This is certainly new to the EL-5.2 timeframe and thus far is not possible to control because the system does not load eth0's driver alias in order, and the enumeration of the PCI devices causes what seems to be random labeling of the first interface.
This is a particular problem in that identical hardware systems will come up with different eth0 interfaces , and on a single system, without the /etc/sysconfig/hwconf (which calls "eth0" something different from what was originally in the /etc/sysconfig/network-scripts/ifcfg-eth0 HWADDR directive).I need as little auto-magic as possible, I can live with PCI-bus order and driver load order is the order ethernet devices appear in, I cannot use the software in a state where what is "eth0" is randomly determined and the only way I can nail it down is to run kudzu, generate a hwconf AND brand the network interfaces in the network-scripts with HWADDR. I've been using EL since 6.2 and this is the first time I've ever encountered a situation where the enumeration rules (which are ancient at this point) over-ridden by something.
Version-Release number of selected component (if applicable): EL-5.2 series.The random enumeration of PCI devices and the subsequent assigning of eth0 to a random NIC is not on every reboot, and does not seem tied to a power off scenario vs a simple reset or warm reboot. Over the course of 0 reboots , eth0 should have moved between 2-3 times.Packages that seem relevant.
CentOS 5 Server :: Named And Access Rights / SELinux - Access Denied
Aug 24, 2010I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedCentOS 5 Server :: Cannot Access VMware Via Infrastructure Web Access
May 9, 2011I've recently installed CentOS 5, because I needed a good OS to run VMware Server. Just a heads up, I'm not very familiar with RH/CentOS distros, I usually use Arch Linux. My VMware install went fine, config is standard settings. Now I'm trying to access the VMware Infrastructure Web Access using port 8222 (http) and 8333 (https), but it's a no go. I'm connecting from another machine on the LAN, as the CentOS box is headless. I restarted the vmware services, and they seem to be launching fine. I don't know much about VMware though. I verified with netstat and ports 8222 and 8333 are listening.
View 3 Replies View RelatedCentOS 5 Server :: Mysql.X86_64 V5.0.77 On CentOS 5.3 ERROR 1045 (28000): Access Denied
Oct 21, 2009This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
CentOS 5 :: Installing CentOS-DS - Cannot Get To The Extras Repo Due To Lack Of Wired Sans Internet Access
Dec 9, 2009I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies View RelatedCentOS 5 Networking :: Internet Access Slow In CentOS 5.3?
Sep 9, 2009I have an MSI K9A2 Platinum mobo, which has a 10/100/1000 Fast Ethernet Realtek 8111B built-in, a D-Link DIR-655 Router and a DSL modem. Compared to Windows Visya and other Linux distros ( Fedora 11, Suse 11.1, Mandriva 2009.1 ) access to the internet is much slower. It seems there is a noticeable delay when running CentOS 5.3. before internet access kicks in each time I am surfing the web or updating my system.
Is there any way I can speed things up, or determine why CentOS 5.3 seems much slower ?
Fedora :: Using 11 On The Eee PC 901/1000
Jun 23, 2009With the official release of Fedora 11, I decided to make an updated tutorial on how to install it and configure it on the Eee PC 901/1000. You can find the tutorial and packages on the fedora-eee website. I just started this thread for Eee PC-specific F11 troubleshooting and any questions or remarks regarding the procedure or packages.
View 14 Replies View RelatedNetworking :: Install A PCI-E 10/100/1000 NIC?
Jun 19, 2010I'm operating a server running Slackware 12.1 and I need to install a PCI-E 10/100/1000 NIC, im just wondering if anyone has any recommendations for a card that has solid support under linux or is otherwise known working.
View 1 Replies View RelatedFedora :: F12 On Asus EEE 1000 SSD Netbook?
Nov 28, 2009Fedora 12 is nearly turnkey on my Asus EEE 1000 SSD netbook. I just needed a few tweaks to get the wireless and touchpad seutp. All of this info is scattered in various places including right here on the FedoraForum, but I thought if it would help just one more person to have it all in one place, then so be it.
1) I used the Fedora 12 i686 Live iso.
2) I installed it on a 1GB thumbdrive using my desktop Fedora 11 system:
sudo livecd-iso-to-disk Fedora-12-i686-Live.iso /dev/sdg1
3) While booting the EEE, hit the Esc key and select the USB device of the thumbdrive. Make sure a wired ethernet is plugged in. We will restore the wireless later.
4) Pick the defaults, except when it comes to the disk partitioning. I have the pair of SSD drives, one 8GB and the other 32GB. I reduced the swap volume size to 2GB to match the memory in the device rather than using the 4GB default (2x memory) and increased the / volume size to the max. I planned on turning off swapping and only intended to use the swap space for the sleep/hibernate functionality. Otherwise, I let the installation setup the layout. a /boot with 200MB of space, 2gb swap volume, and the rest under LVM covering both SSDs.
5) Finish the installation. Reboot and create your user.
6) Apply any patches that are available using SoftwareUpdate. Reboot if necessary.
7) Now time for setting up the wireless. We need the rt2860 driver. This is available in the rpmfusion.org repro. First we need to set it up. Bring up FF and use this url:
[Code]...
Ubuntu Networking :: WPA Wireless On Eee PC 1000?
Jun 24, 2010I am having trouble establishing a connection with my WPA wireless network at home. Other laptops at home can connect to this network and even the Eee PC can join free wifi networks. The problem seems to be only with WPA networks. When I enter the password for the WPA network, it tries to connect for a while and then shows me the password dialog box again. I don't get any IP during this time, its always 0.0.0.0 I reinstalled my Ubuntu netbook remix but that didn't help. This problem was occurring in the standard Ubuntu 10.04 too.
View 2 Replies View RelatedNetworking :: Intel Pro/1000 Can Not Go Online?
Feb 20, 2010env: debian kernel 2.6.31/ gcc 4.x/ hp6910p I encounter a problem whilst trying to connect online using Intel PRO/1000 nic, but fail. It seems the problem of nic (Intel PRO/1000 'e1000e').
dmesg | grep e10001 shows
Code:
Intel(R) PRO/1000 Network Driver - 1.0.2-k2
PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci_enable_pcie_error_reporting failed 0xfffffffb
irq 29 for MSI/MSI-X
dmesg | grep eth0 shows
[Code]...
What should I do so that I am able to solve this issue or does any resource/ doc tell how to configure e1000e to enable Intel PRO/1000 nic?
General :: Telnet 192.168.0.4 1000 Failed?
Jul 20, 2010I have a temlnet problem -telnet 192.168.0.4 1004 failed.
At 192.168.0.2, "telnet 192.168.0.4" make connection successfully at port 23, however "telnet 192.168.0.4 1000" does not make connection at port 1000.
