I can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card
BCM4322
When I enter /sbin/lspci -nnk
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
So the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
abhishek:/ # sudo /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
I am running SLED 11 and My Networkcard is Intel PRO/Wireless 5300. In short, it is not there anymore! I mean I was connected and everything and the next time I restarted It could not detect any wireless network. I deleted the wireless network card in hopes that the OS will automatically detect it on startup and set it right but NOPE. When I check the hardware information in YAST, it is listed there and it is also working under Windows.
i've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code: zypper in broadcom-wl broadcom-wl-kmp-desktop So now, the networkmanager detects all the networks around, but i cannot (or i don't know
i'm run'n knoppix 6.5 (i think) from a usb stick. under 'ifconfig' it finds 'eth0', but when i put in 'iwconfig eth0' it says: 'eth0 no wireless extensions'. i've tried other linux live cd's but to no avail...interestinly enough, when i run a linux (ubuntu) live cd on my virtual pc it hooks up(?..i figure bcuz its reading from da virtual ethernet?) further more, i researched it to the conclusion that the driver is not being detected. i tried ndiswrapper (under 'puppy') but tht didnt work either ( i've downloaded the lastes version of ndiswrapper and i plan on trying it again w/ the installation disk of the wireless card). however, even in my research i've seen there seem to be a difficulty in getting this particular driver to work? (netgear wg311v3 - wireless g pci adapter) how i can over come this problem? i'm kinda new @ linux, but i like the challenge. it doesnt matter wat linux system (the responder) i'll download it. but i'm really trying to get 1 online cuz i have to learn how to work the packaging systems.
I have a dwa-125 dlink wireless card which will not work. This is my first time using OpenSuse 11.2 (Well OpenSuse period). I had the same problem with Ubuntu 9.10 as well. If it will help the solution I used with Ubuntu is here: [ubuntu] Dlink DWA-125 Wireless Card Issue - Page 4 - Ubuntu Forums. I'd rather use OpenSuse than Ubuntu.
So decided to try a fresh install as ubuntu was having issues every update for me. Regardless i can't seem to get my wireless working and i'd really appreciate some help as i have no idea what i'm doing.
Using a hp pavilion dv5 1235dx.So my network card does show up it's a broadcom 4312 pci id 4315.Installed the b43 & wl drivers but it didn't help. The hardware switch is stuck at orange but in ubuntu it would function despite this(sometimes ).
How do i get debian to recognize my wireless card? i have one built right into my laptop after some messing around on the terminal i believe it is a code...
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
Today I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
I just did a new install of slack 13.1 and i cant seem to be able to get my wireless card up. my system is a new ish dell laptop,a vostro 3700 to be honest im not even really sure where to start here. if i ifconfig i only get my ethernet and my loopback and if i "iwconfig" i just get told that i have no wireless extensions. yeah not sure what else to add.
I have a AR928X wireless card and everything I have tried has failed. The default driver ath9k scans and connects to my router but cant connect to any site or ping anything , same with the madwifi driver lspci prints 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
I have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
Well this my first time working with linux and openSUSE, and I love it. But one problem I can't overcome is my network card is not working. I went to bestbuy and bought the dynex enchanced wireless G card. Model # dx-ebnbc ver. 1011
I installed wine to run the .exe but that did nothing and gave me that the dll is not registered. openSUSE detects that the card is plugged in but the card does not light up or activate in anyway. The only way I can connect to the net is through an Ethernet cable.
I had Karmic a while back, but i got rid of it becasue of my Bcm4312 Wireless Card would not recognize the STA driver, or bcm43xx.In that time i learned a bit of command line stuff. anyways now that I have my internet working, I was just wondering What I could do with ubuntu. I am interested in the command line and Programming. Where could I learn more about the 2 subjects?
I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Also, here is the more complete output of /usr/sbin/iwlist scan: Code: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. pan0 Interface doesn't support scanning.
Just put Ubuntu 10.10 on my Fujitsu Amilo Li1818 and it does not seem to recognise the wireless card. If I click on the network icon in the top bar there is no mention of wireless.
I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
