Ubuntu Networking :: D Link Wbr 1310 Not Getting Connected?
Apr 16, 2011
I trying to connect my linux machine( kernal 2.6)with a D-Link WBR-1310 router (Firmware fully updated). Internet was working on the computer when it was connected to other network. DLink is DHCP Server enabled. The XP boxes had no problem connecting to the internet automatically. My linux box was having trouble (absolutely no network detection.) on D link and port of linux lights are green. for the Wired Connection I set the configuration to Automatic Configuration (DHCP). I was unable to ping my router at 192.168.0.1 (Destination Host Unreachable).I'm not sure what to do, but I suspect it may be the DHCP client settings.
View 1 Replies
ADVERTISEMENT
Jul 8, 2010
I had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.
View 6 Replies
View Related
May 20, 2010
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
View 2 Replies
View Related
Apr 17, 2010
My name is Dieter, from Belgium, new here. I installed suse 11.2 from the dvd. I bought a wificard that is supported under linux for this pc. Still my firefox does not connect to the internet. I set up the card in yast to dhcp. I find networks and can connect to them but that's where the story ends. This is some data, sorry for the layout, I have no experience in posting stuff in fora.figure out why i cannot connect to the internet?
[Code]...
View 1 Replies
View Related
Dec 29, 2015
I have a RT8187B wireless card in my notebook. When I turn ON my wifi and connect in a TP-Link router, after -+ 30 min, the notebook power off. It's not like shutdown. It's like the power (battery and power adapter) was removed: everything stops working immediately and erases (like a blackout when we don't have a battery). When I'm using my ethernet all things works pretty good.
View 7 Replies
View Related
Apr 26, 2010
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
View 3 Replies
View Related
Aug 16, 2011
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
View 9 Replies
View Related
Apr 28, 2010
i only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
View 9 Replies
View Related
Sep 6, 2010
In the ordering of files I keep I need links to directories. Sometimes I even need to move directories to new locations. I have tried using symlinks, but they become dead when I move the directory they point to. I have tried hard links, but I haven't found any Linux file system that would support hard linked directories. How can I achieve that a complex structure of directories (currently with symlinks for directories and hard links for files) keep symlinks live when directories are moved?
- is there any utility that updates symlinks when a directory is moved?
- is there any Linux filesystem that supports hard linked directories?
- is there any good Linux interface to the new NTFS (the only file system I know to support automatically updating directory links, called directory junctions)?
View 9 Replies
View Related
Jun 8, 2010
Whenever we insert CD,it creates a shortcut link in desktop.Can we list this link name by using any command? I am using Oracle Enterprise Linux 5.0.
View 10 Replies
View Related
Sep 8, 2010
how can we create soft link and hard link in RHEL5 when am using in command it is giving format error
View 6 Replies
View Related
Jun 20, 2011
I have searched around and am trying to understand the difference between a hard link and symbolic link (soft link). I found this link is quite useful. But I am still not very clear. I understand soft link is not a copy of original file, but is a hard link a copy or not?
View 4 Replies
View Related
May 22, 2011
I've just installed ubuntu 11.04 on my dell inspiron mini 10; dual-booting it with Windows 7.
I've looked at a couple of other threads about problems with the wireless card in the netbook and about problems with the wireless router. However, this problem doesn't seem to be the same; the netbook can see other wireless networks, just not mine, and other people seemed to be able to access their wireless network for a short period of time before they stopped being able to access it.
I can't see the wireless network on the D-link DIR-615 at all in ubuntu, though it still works in windows 7.
I've tried reinstalling the broadcom STA drivers as per this link and reinstalling but this hasn't made any difference.
What things should I consider trying in order to resolve this?
Ps. As a side note, my other ubuntu laptop (a toshiba equium A100) cannot see this network either, but has no problem connecting to other, although oddly it couldn't detect it in windows either before I put in a new harddrive and installed ubuntu on it.
View 9 Replies
View Related
Jan 6, 2011
I have a wireless network that my PC connects to just fine. I did have to change my address to 10.10.10.1 (Cisco router)
How can I do that with Ubuntu?
I will need very specific directions, because I don't normally use Ubuntu.
View 2 Replies
View Related
Sep 27, 2010
I have just built my self a new computer, since it will become a media center its not that powerful so i decided on using ubuntu instead of windows. Only one problem so far, my D-Link dwa-131 is not recognized and i can't connect to the internet except with a Ethernet cable. So how do i make my computer recognize the dwa-131?
View 1 Replies
View Related
Mar 23, 2010
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
View 9 Replies
View Related
Jun 4, 2010
i m trying to get online using prolink phs 100 modem i have been reading forums and tried to configure my system but i cant install USB_MODESWITCH coz its a bz2 file.... i tried downloading .rpm file and tried to convert using alien..i was prompted i didnt had alien..
i downloaded alein .deb file and tried to install i was propmted dependency not satisfied... debhelper(>=3) i downloaded debhelper . deb file and tried installing i was again prompted dependency not satisfied... dpkg-dev(>=1.14.19) i need to get connect ubuntu...
View 1 Replies
View Related
Jun 4, 2010
i'm connected to my 2wire 2701hg-b, but have no internet. when i plug in directly there's no prob, but wireless is a no-go.
View 1 Replies
View Related
Aug 24, 2010
This is my second day with ubuntu on a dell mini 10v with broadcom wireless card. I hooked up to a wired connection and ubuntu installed the drivers for the broadcom card.When I put the cursor over the wireless icon on the desktop it shows the name of my wireless connection,active,and my ip address but when I open firefox I get a "server not found". I'm confused as what to put in the boxes for ssid,mode,bssid,mac address,and mtu under network connections. I've tried pretty much every conceivable method at my disposal,even went on my d-link router settings and nothing has worked.I do not have windows installed,using 10.4
View 1 Replies
View Related
Oct 30, 2010
After being a windows *** all my life I've finally taken the decision to start using Linux for real.
So I bought a entire new laptop for the task and it landed on a Acer eMachine 350.
Trouble here trouble there I finally came down to a ubuntu netbook edition, the latest one for the moment.
I had to use jockey-gtk to install drivers to my broadcom network card which took a while, but it now says I have a driver!
Trouble is, when I connect to my WLAN at home it says connected to Gustafsson(Network name) but my interface eth1 looks like this:
Code:
eth0 Link encap:Ethernet HWaddr 88:ae:1d:5f:e8:b4
inet addr:192.168.1.19 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::8aae:1dff:fe5f:e8b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
code....
View 2 Replies
View Related
Feb 28, 2011
I'm having a problem with my computer connecting to a speficic wifi. The problem seems to be between my computer and this wifi, because I can connect to other networks and other computers can connect to this wifi. I do manage to get a connection, but I can't ping any website, I always get an unknown host error.I have managed to connect to this network only once: it wasn't pinging and then it eventually started working, but I don't recall doing anything that made it work.
[Code]...
View 1 Replies
View Related
Mar 24, 2011
I am running a dual-boot with Ubuntu 10.10 and Windows 7 and I can't stay connected to the internet with Ubuntu, but Windows does. My router is a D-Link GamerLounge DGL-4500. I have wireless internet access for about 10 seconds but then it drops. Access to the router doesn't go away though. Other computers can connect to it just fine, and my computer (Toshiba Satellite A505) has connected to every other one I've tried on. I can still log in to it and change settings and all that, but I can't access the internet through it. I also can't ping the router.
View 1 Replies
View Related
Jun 25, 2011
I can connect to my router but no web pages will load etc... I can connect my phone to the router and USB tether it to my laptop and everything works fine. I can also connect to my neighbors router and everything works fine.
I have tried put my routers IP in /etc/resolve.conf but to no avail. I also tried putting 8.8.8.8.
Edit: Toshiba Sattelite A215 laptop (RS690 wireless card?) and a Linksys router.
View 9 Replies
View Related
Apr 15, 2010
I have managed to get vpn set up on my Debian Sid (I think). I want to use a different server from my default.IBut I am not using the vpn server instead of my usual one. Is there a way to make this happen?
View 14 Replies
View Related
Jan 3, 2010
I feel I am really really close at getting this connected.
The native ath9k driver did not work. I blacklisted this driver and then proceeded to load a windows driver that came with the card through ndiswrapper.
The system sees my wireless router but I could not get connected to the router. I get the circle of death of it trying to connect though.
I then replaced the Network Manager with Wicd.
I try and connect, after setting the preshared key, and it stops at the very end saying it could not obtain an IP address.
I then try to set a static IP, and at the very end it comes back with, "could not contact wireless access point".
I feel I am so close to getting this connected I just don't know if it is a setting on my router I need to change or to look for a different driver. Driver should be fine but I'm no expert.
I have two other computers wireless'ly connected to this router currently and one of them is connected via a dual boot, Ubuntu and Win7, so at the very least these two computers don't have any issues connecting to the router.
Or I am just going to live with WinXP installed on it instead. BTW: I had no problems getting a wireless connection from this laptop when I had WinXP installed, but I have since wiped it off with a clean install of Ubuntu 9.10. Goes to show how much I want to rid myself of Windows on the laptop.
I even installed 8.04 to see if I could make a connection with that version but to no avail I could not. I have since reloaded 9.10.
View 1 Replies
View Related
Mar 21, 2010
I've got an oldish laptop which I've installed 9.10 on. I plugged in a D-Link DWA-140 USB wifi dongle to see if it can connect to my wifi router. It quite happily flashed it's light, and when I click on the wifi icon on the top panel it lists a bunch of wifi networks including my own. However, when I select my network and enter the passphrase it doesn't connect, and just keeps asking for the passphrase/key again
View 1 Replies
View Related
Feb 2, 2011
I am trying to get my wireless card to work in my desktop, which I recently upgraded from 8.04 to 10.04. It worked right out of the box in 8.04, but I'm finding it impossible to kick start in the newer LTS version. My wirless card is: D-link WDA2320 The Ubuntu wireless card Wiki sticky note at the top of this section supports my problems, stating: "Worked out of the box in 7.04, 7.10 and 8.04. WPA worked automatically in 7.10 and 8.04. In 9.04, works out of the box, but system hangs periodically with the ath5k driver; you must instead enable the madwifi driver in the Hardware Drivers dialog to get a stable system. In 9.10, does not work out of the box."
Obviously, it does not give me any information on 10.04, so I'm not sure it is even possible to get working. Assuming it would even work, I tried looking for madwifi in the Hardware drivers dialog (assuming they are referring to the option through System/Administration?), but cannot find it, or figure out how to search for it. Following the rules suggested for resolving wireless problems, here is my info:
2 ) Wireless Brand, Model and Wireless Chipset (via lspci):
[Code]...
View 3 Replies
View Related
Feb 4, 2011
I am running Ubuntu 10.10 on a Toshiba Satellite laptop and need to be able to put a permanent link to my other machine (Windows Vista) on the desktop. At the moment I have to go through the Places - Network - Windows - Network Name - Windows Shares - User rigmarole.
View 1 Replies
View Related
Jun 29, 2011
After compiling the Realtek drivers from their page (ver 8.024), installing the module, blacklisting r8169 and updating the initramfs, I still can't get the network card working.The card is listed in lshw as RTL8111/8168B PCI Express Gigabit Ethernet controller.lsmod shows only r8168.dmesg keeps spitting once and again, every second or so the following:
Code:
[ 1293.452274] r8168: eth0: link up
[ 1294.449785] r8168: eth0: link down
[code]....
View 5 Replies
View Related
Jul 25, 2011
I need to know that how should I install my usb Wireless adaptor , it's a tplink tl-wn422g v 2 , is there any way to install it ?
View 3 Replies
View Related
