Ubuntu Networking :: Im Connected With Wired Connection But No Browseing Or Download?
Apr 21, 2011i see that im connected to internet but when i start browseing or downloadate no connection or very low speed
View 2 Repliesi see that im connected to internet but when i start browseing or downloadate no connection or very low speed
View 2 Repliesi m connected it with wired bb airtel connection but its not working i have one more operating system windows 7 thats working nicely with that connection.
View 2 Replies View RelatedI just got a new power supply in my old desktop, and installed ubuntu on it. I've got three NICs in there (for a later project), and when I connect my cable modem to any one of the NICs, then little connection triangle-spinny-thing in the upper-right tries to connect. But it never gets all the way connected.
View 5 Replies View RelatedI have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies View RelatedBackground infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.
[Code]...
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedWould it be possible to insert another wired network card into the router-connected computer, share the internet connection and be able to transfer files between the two?
View 1 Replies View RelatedI have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
I have a dual-boot Compaq CQ60-420US laptop. It can connect wirelessly in Vista without a problem. I have not yet figured out how to connect it wirelessly in Ubuntu (10.04, Lucid), but that's not the problem here. The problem here is on the wired side. Whether I boot in Vista or Ubuntu, I cannot get it to go online. Ubuntu says that the Auto eth2 connection is established; I am able to disconnect and reconnect it normally; but I can't download updates and Firefox can't connect to CNN.com. Likewise, in Vista, diagnostics find no problem; everything seems to be fine; but no connection.
I thought the problem might be the laptop's ethernet port, so I bought a Trendnet TU2-ET100 USB-to-Ethernet adapter. It comes highly recommended; it seems to have installed successfully in Vista; it appears properly in Vista's Network Connections; its lights are blinking appropriately; and Ubuntu tells me that my Auto eth2 connection is established when I connect through that adapter. And yet still no connection to CNN.com and no downloads of updates in either OS.
I wondered if some other circuitry might be at issue, so I sent the laptop back to HP. They claim to have replaced the mobo. The symptoms remain unchanged before and after. I went through an extensive tech support call with HP. The last thing their technician could advise was to power cycle the laptop and router. The ethernet connection itself is good. I can unplug the cable from the laptop's ethernet port or the Trendnet unit, plug it into the desktop computer on which I am typing this note, and I'm connected with no problem.
I thought, well, maybe I have to have the laptop's wireless button on, even when I want to connect via wire, but that hasn't made a difference. I tried installing Windows drivers from the Trendnet website instead of from the CD; no joy. I suspect you will be as stumped as I am. I have gone through a lot of other people's comments. At this point, I am just interested in general possibilities. What, in theory, could be causing this?
I had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.
View 6 Replies View RelatedI just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
I have two PCs one has Windows XP the other has Ubuntu 9.10 on it, the Windows PC has no problems getting on the Internet (I'm posting this with it) and getting an IP address from the wired router. The wired router I have is ONLY wired it does not have wireless at all, it is currently setup to hand out IP addresses between 192.168.1.2 and 192.168.1.254.
The Ubunutu 9.10 PC worked great last night surfed all over the place for hours, then finally shut it down last night when I went to bed, shut down appeared to be normal like it always does when it shuts down, then this morning when I booted it up it gave error: "WIRED NETWORK - disconnected you are now offline".
I am using ubuntu in my new office, and I can't get the network working. The "official" OS installed was a Windows, and it has a special "dial-up" app for the LAN connection (not wireless). My network admin is apparently not helpful, since he actually knows nothing about the internals for the "dial-up" app (he did not even ever heard of TTLS, PEAP, MD5, etc), and claimed that no OS except for Windows can work...
Well, I have tested various configurations with my Mac laptop, and apparently the LAN connection requires 802.1X authentication, and it's using a very weird combination "TTLS+PEAP+MD5" (if I check these options in Mac OS X, the connection works). However, in NetworkManager, I can't select both TTLS and PEAP, and moreover, TTLS does not work with MD5. So, is there anything I could try?
Fresh install of UbuntuStudio 10.04. This is really bizarre.
I can't seem to connect to the wired connection mainly because there is no connections tab (pic attached).
Here's some printouts:
dmesg:
Code:
lshw -C network:
Code:
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies View RelatedI've had a computer running Ubuntu connected to my TV for a few weeks now, but as of yesterday, I can't get it to keep a connection to the Internet. Everything works well for an hour or so after a reboot, but then no WAN connections work. When this happens, no sites load in Firefox or Chrome, I can't ping Google, I can't SSH to the box from work, and none of the pages I have running on apache load from remote computers. However, all local area connections seem to work fine. SSH from within my LAN takes much longer than usual, but it does still connect.
View 2 Replies View RelatedThe situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
I have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies View Relatedinstalled Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
I recently did a whole system wipe and got rid of windows all together!! Unfortunately, that means I have to start over with the whole networking thing. I know I have a bcm4311, but I have no idea what I have for a wired adapter. I know that I could search through everything to find what I need, but there is so much info for all the different versions. I have ubuntu studio. Can someone tell me the commands to type into the terminal to find out what I have for the wired network card and recommend a place to get the proper "drivers" to get my computer working again?
View 5 Replies View RelatedRunning a wired connection through a Linksys router that suddenly stopped working today.I thought this was a ipv6 issue sinced I enabled some of those settings to share a connection with my PS3.I have since disabled IPv6 in Firefox and through the grub. The RealTek adapter will not even show a connection through the network manager when connected.The onboard adapter will show a connection, give me a ip address and MAC but still will not load the internet. I've tried uninstalling and reinstalling both adapters through the network connections, as well as reinstalling Firefox to no avail.I've also tried using Open DNS servers.I cannot ping through the network tools either. Hard for me to paste a ifconfig since I'm on my laptop.I'm running Ubuntu 10.10 (not dual booting).I did some updates this morning but it worked fine for a little while after that, until I tried to connect to my PS3.
View 3 Replies View Relatedi got wired connection using Ubuntu 10.10 and im new using ubuntu pls tell me where i must write the words not to write codes and i don't where i must do it.what is the best version of Ubuntu didn't had that problems?as i saw that Ubuntu 10.10 had same problem for all people.
View 3 Replies View Relatedi can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
A while ago i attempted to use ubuntu as my default operating system and it failed, i could not get the shares to work properly and i gave up. Yes i know, may be i should have kept going.
Any way, my problem is, Im attempting to use ubuntu 11.04 now, and this time i am realy keen on going through with this, however... for some reason when i connect my wired connection cable ubuntu keeps failing to connect. this is with the auto eth0.
Can any one help me with this problem? This is one of the major things that i will need to do if i want to switch over to ubuntu.
So I had 11.04 beta and after the official release I updated,rebooted and lost all wifi and wired connectivity.
On an Inspiron 9300
lshw -C network gives
*-network:0 UNCLAIMED
For my Broadcom BCM4401-B0 100Base-TX and *-network:1 DISABLED For my wirless interface Intel PRO/Wireless 2200BG
I'm running 11.04 on a Toshiba Satellite L350, and recently (well, for the past couple of weeks or so), I've been unable to connect to my network via a cable, only with wifi.
It isn't that it's unable to connect, it just doesn't show up in Network Manager.
My housemates, who run Windows, have no problems, so it's obviously something on my end...
Edit: I also tried connecting using wicd, but that doesn't detect it either.
I recently installed 11.04 on my PC (was running 9.04), and beforehand "tried it out" and networking was fine. I could access the internet no problem.I then ran the install, and fully formatted my HDD (i have 1 HDD for the OS and another for storage)It crashed halfway thorough, so no problem, i just re-formatted the hardrive and installed.However, It didnt connect to the internet, I literally tried every single forum looking for the solution, including editing the Network interface file.After a bit of diggingfound my user privileges did not allow me to connect to ethernet, and randomly use audio devices.SO, no problem I checked the boxes, but it still wont connect to the ethernet now, and it was fine before, tried re-installing twice with full format, but still doesnt work.
View 9 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.