I'm trying to connect to an XPpro machine using terminal server, I've been to the microsoft web sight and configured xp as they explain. Which consists of "allow remote desktop connections" and "re configure the fire wall", Done. I've obtained the ip address of the router and the user name and password of the xp machine and still I cannot access it!
View 6 RepliesI have been wanting to switch from my routers VPN to my headless linux box VPN. I have everything setup in the PPTP and then forwarded the ports to it. Heres the kicker. My APPLE Iphone connects to the VPN without a problem at all. Views Intranet pages etc.
My Windoz XP is kicking and screaming and one error after another. This is my setup on XP: I entered Ip Entered exact same credentials as used for connecting with my iphone turned off "use gateway on remote network" Changed type to PPTP VPN connecting my xp machine to this PPTP server on linux?
I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it. This may apply for other Universities with similar setups. It was impossible for me to figure it out on my own, I had to go back to my old 9.04 partition to get the info...
1) Open Terminal Server Client (Applications>Internet>...)
2) Insert as follows:
Code:
Computer: eDesktop.uwf.edu
Protocol: RDP
User Name: YOUR USERNAME
[code]...
3) OPTIONAL BUT RECOMMENDED click Save As and save it as a quick connect so you don't have to refer to this again.
4) Flip through the other tabs and configure as desired, and click Connect!
I am having trouble connecting to VNC server from any machine in my house. The server is running fedora v14.
Previously I was able to connect when i had dsl, but i have since switched to cable and am having a problem
I checked the vnc error log and saw the below error. Note these are excerpts from the file
I have checked
1. VNC server is up and running
2. My username is in the vnc file
3. the port i am trying to connect to is open.
[Code]...
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
How to create some sort of network, which would mean that one computer (Lubuntu in this case) is connecting to internet through second PC (Ubuntu), which is directly connected to cable, so maybe I get some manuals and tips. The computer which is connected to internet have two LAN cards (Realtek 8139 and integrated nVidia MCP65), Realtek card is connected to the internet provider cable (internet is tied to my computer's MAC address and uses static IP).
Second computer have also a Realtek card and it's connected to first computers integrated card. Anyhow - I've put on the first computer eth1 (which is integrated MCP65) IPV4 setting to "Shared to Other Computers" and IPV6 to "Link-Local Computers" and while I was having Windows XP on the second machine, setting on it (the XP machine) DHCP (or how was it correctly called, when system automatically resolves or gets the IP and the rest what it needs?), second computer was receiving Internet signal and I could use both of them in such way.
Now the second computer is with Lubuntu and I thought that I could do the same way as did on XP - just put in Network Manager for the connection (eth0) everything to automatical and there will be internet, but there aren't and the manager shows some kind of "Automatic Ethernet" option, which after activation also doesn't do anything. What do I have to do, to make my Lubuntu machine to recognize Ubuntu's eth1 and to use it as a source for Internet?
Has anyone got experience connecting a linux machine to a Microsoft VPN server using RSA authentication? What puzzles me perhaps most about this topic is the absolute dirth of information. If it is not possible, can anyone tell me why?
View 9 Replies View RelatedI have tripwire enterprise (not open source) agent running on one of my rhel4.8 web servers (I have actually tried with two servers with same results). The agent is a simple install rpm bin file and appears to be running as it should and the server for tripwire enterprise is set up accordingly. A windows tripwire enterprise agent is also on a windows machine that works perfectly well. But I cannot seem to get the tripwire server to talk to the agent on the red hat machine.
I can connect to port 9898 on the server, but the agent who also talks over the same port doesn't appear to be responding to the server on this port. There are no iptables set up to block the requests, there is no firewall set up (disabled) . Network team can see the packet requests being sent over the routers fine... So can't see why there would be a problem. So i reverted to the use of net cat.
Nc -l 9898 (on the agent machine)
Telnet <agent> 9898
But I get connection refused. Is there anything I could be missing here? Redhat is not my Linux of preference and it may be something obvious!
I would like have my client computer be able to boot off of a cd right into a terminal server connection. Not click here, then there, enable wireless....so on.. Just boot into a terminal server connection screen.
View 1 Replies View RelatedI need to reinstall my GUI but all I can access currently is a terminal, I have the encryption key and SSID but have found all the how to's I've read really confusing since following certain steps on them give me error messages, I'm connecting wirelessly to wlan0.
View 9 Replies View Relatedim using minimal ubuntu 10.04 and im having trouble connecting to wifi using the terminal. the wifi worked perfectly on the desktop version. i followed this guide [URL] and looks like then i used '/etc/init.d/networking restart' and get this now it seems ive disabled wlan0 as $ sudo lshw -C shows
i tried to enable it again by using 'sudo ifup wlan0' but i get a few errors i think the 2nd errors may be because i tried to download another driver for the wireless using 'wget [URL] and then 'dpkg -i rt3090-dkms_2.3.1.3-0ubuntu0~ppa1_all.deb'
I recently installed Fedora 14 on my machine. Ever since I cannot connect to the Internet at home.henever I plugin in the ethernet cable the ADSL router disconnects and all machines connected to the router lose connection to the Internet.
View 9 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI have WiFi router at home and connected two computers running ubuntu linux connected to it. One connected through WiFi, second through LAN. So what is the problem: I can't SSH from Gnome terminal to any machine. Be it local computer on the same router or be it distant computer. SSH session hangs just after successful login. I've read a lot about it and it should be related to DNS, MTU or whatever, but not in my case ! PuTTY client works without problem to local or to distant PC. SSH session from Gnome terminal works also just fine if.... I connect two comupers directly by not using router. So it seems SSH installation is ok, configuration is ok, but somehow router is not ok. I looked at packet sniffer of router itself and I see that packets successfully go from one computer to router and then to other computer and returns back. Firewall working ok. And its not about packet forwarding because I have the same problem if I try to SSH to router itself.
So the question. What theoretically might be wrong with router packet management ? Why PuTTY and Gnome terminal SSH packets differs ? What is the difference ? Where should I search for some sollution? I ran SSH in debug mode, but it was no so informative. It successfully logins and hangs on this line: Code: channel 0: open confirm rwindow 0 rmax 32768
I have a home server that I have setup to connect to via SSH. All is working well with that. I would like to have the home server access the internet through a VPN. However, if I do this, I am no longer able to connect to the server via SSH, even though I know what its IP address is.
View 1 Replies View RelatedI am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
I've been experiencing some home web-server slowdown issues lately, and I wanted to see if it's a problem with the server itself. I'm not sure if this might be the problem, but upon checking netstat -tn, I see over 15 instances of the following:
[Code]...
where 192.168.2.9 is the server's local address, the local address port varies, and the foreign address is the server's web address. If anyone knows what might be causing this and/or how to fix i
I have setup an ubuntu gateway server by using four NIC cards.
eth0 :210.212.235.107 is connected to the internet
eth1 :192.168.1.222 is connected to the local network
eth2 :192.168.2.222 is connected to another network
Here 192.168.1.222 is the gateway for 192.168.1.0 network and 192.168.2.222 is the gateway for 192.168.2.0 network.These network configurations are working fine, but i want to block inter network communication ie from 192.168.1.0 network to 192.168.2.0 network,i want to block the communication for securing the local networks more.I know iptable rule is enough for this purpose .But i cant find the apt rule for this purpose.
i have two subnets with different gateways.i am thinking of connecting them via a linux server which would enable them to communicate.but i dont know how to proceed for getting this done.how should the connection be made and what should be the configuration settings on the linux server.
View 2 Replies View RelatedI just installed Ubuntu server edition on to an old Dell desktop. The only problem is that I can't get the Internet to work. I have tried the following and I guess it doesn't work:
Code:
sudo ifconfig eth0 192.168.1.52/24 up
sudo route add default gw 192.168.1.1
Each of those commands don't give me any error and it would seem like everything works fine, until I try to ping google or any website and I get an error that tells me that no host was found. I am using version 10.04 of Ubuntu server.
I'm attempting to get 10.04 to connect to an SBS 2003 pptp vpn server, but for the life of me have been unable to find or implement a working solution. System previously had 8.x and 9.x and had no difficulty connecting to same server, but on a fresh install of 10.04 cannot connect.
tail -f /var/log/syslog shows the following:
Code:
Sep 10 15:19:32 ubuntu NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 10 15:19:32 ubuntu NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
I followed the instructions given in the link below in order to connect to a VPN server from my Ubuntu 10.04 PC.
[URL]
As mentioned in the above link,i had the system setup. I am able to connect to VPN using the default network manager that comes with Ubuntu.
But from command line, using pppd dialing,i am unable to connect to server.I get only the following messages in /var/log/messages always.
Log:
####
Oct 6 15:01:09 hari-desktop pppd[3660]: pppd 2.4.5 started by root, uid 0
Oct 6 15:01:09 hari-desktop pppd[3660]: Using interface ppp0
Oct 6 15:01:09 hari-desktop pppd[3660]: Connect: ppp0 <--> /dev/pts/5
Oct 6 15:01:10 hari-desktop pppd[3660]: Connection terminated.
[Code]....
Is there any specific VPN client using which i can establish a connection with the following information in hand ?
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies View RelatedWe have a mac book connected to our network. It can surf the web and even get into our network files. However, these network files are on linux, and finding the open files (not password protected) is fine. But we need the mac book to get into the protected files to edit our media. When we connect to the linux server, there is a pop-up asking for a login. We enter the correct credentials that work for everyone else to get into our protected files, but these credentials don't work... There is a message that pops up: "This operation cannot be completed because the original file '<file_name_here>' cannot be found." But it found the other open files...? what do we do to get this to work? The macbook is 'os x' and the linux server is 'fedora 10'
View 1 Replies View RelatedI have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
i would like to connect from my home pc to my local machine at the university (fedora 12) behind a main university server(linux) through vnc. specifically,to connect normally through ssh/X to my local pc i have to ssh first to the main university server and then ssh to my local pc. Namelly:
ssh -Y -l loginname main.server.name
and then
ssh -Y my.local.machine.
On my local machine there is a vnc server running that I would like to access it from home (linux machine). Actually linux is running everywhere.
I want to use centos as a developer server on my desktop before deploying my stuff to the internet.
I have a netgear DG834G router. It's IP address on my local network is 192.168.0.1 and connected to the adsl line. The router is set up to act as an dhcp server too. On the router I have reserved ip address for the nics per their mac addresses.
My server is on a dual boot desktop. The other boot is XP and works fine, picks up dhcp.
I don't know how to connect Centos to the router.
I have tried to play with the network manager but to no avail.
I can ping localhost, interface eth0 is there, but i can't ping to the router.
I have set the manager system/administration/network to get dhcp automatically.
I can't activate the eth0 although the hardware device says it is OK.
I've looked at firewall and iptalbes.
I have ubuntu 10.10 with all current updates. and I have virtualbox installed I have xppro running through virtualbox. I am unable to use my printer with linux, (lexmark) so I want to hook up my printer to my xp that is running in virtualbox. but the xp does not see any usb devices.
View 3 Replies View RelatedIn fedora 10 I want to browse the share files in our windows network. When I want to use 'connect to server' with user name and password. It says:
"Cannot display location smb://servername/"
"No application is registered as handling this file".