Ubuntu Networking :: 10.04 Server Not Connecting To Internet (Wired Network)
Jun 10, 2010
I just installed Ubuntu server edition on to an old Dell desktop. The only problem is that I can't get the Internet to work. I have tried the following and I guess it doesn't work:
Code:
sudo ifconfig eth0 192.168.1.52/24 up
sudo route add default gw 192.168.1.1
Each of those commands don't give me any error and it would seem like everything works fine, until I try to ping google or any website and I get an error that tells me that no host was found. I am using version 10.04 of Ubuntu server.
View 7 Replies
ADVERTISEMENT
Feb 21, 2010
I have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
View 9 Replies
View Related
Jun 8, 2010
I have never seen this before but to connect to the internet either wired or wireless I have to connect to a broadband connection as well. I am currently using wireless; I connect to ISP with wireless but in order to access the internet I have connect to the wireless connection through my broadband connection(This is where I enter a user name and password.). I'm not sure why this is, I have always just plugged an Ethernet cable in and the computer just knew I guess.
I am using ubuntu-10.04-netbook-i386.iso that I had put onto a USB drive. It booted fine, but when I tried accessing the internet I couldn't. I was able to connect to the ISP, but I couldn't find any settings for a broadband connection. My computer is a Acer Aspire One Netbook 250
Intel Atom
CPU N270 @ 1.60GHz
1.60 GHz 1.99 GB of RAM
Network Adapters
Atheros AR 5B95 Wireless Network Adapter
Atheros AR8132 PCI-E Fast Ethernet Controller
View 3 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Mar 24, 2010
Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
View 2 Replies
View Related
Sep 21, 2010
I'm having trouble getting onto the internet with ubuntu 9.04. I have just moved house and have just got the internet set up here (typing this on windows laptop with wireless). My ubuntu desktop is plugged in to the network, but in the top right hand corner when I click on the network icon I get: "Wired network device not managed"
In my old house I had a static IP. Is this anything to do with it?
View 9 Replies
View Related
Mar 28, 2011
Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.
On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.
View 8 Replies
View Related
Aug 5, 2009
A few days ago my wireless windows vista computer internet was running slow so i reset the modem. Then I went on the internet on my ubuntu machine machine and went to www.google.com and couldn't connect to the server so i tried linuxquestions and i couldn't connect but i could ping sites. My wired and wireless windows computers worked fine. So I called Comcast (my ISP) and said it was a router issue. So I looked online and it said to disable IPv6 on firefox so I did but that still didn't work.
View 12 Replies
View Related
May 2, 2010
My friend has 2 pcs, one connected to the internet and the other one used to connect (when he had windows installed) to the internet through the first one using internet sharing, now i installed ubuntu on both and the network between them has been created but it wont connect, the internet icons just animates for like a minute then says "wired internet disconnected" in other words it failed to connect.
View 1 Replies
View Related
Jul 20, 2010
I have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies
View Related
Nov 13, 2010
I setup a network bridge on pc A, with windows 7 installed on it, using windows default bridging tool. I connected computer B to computer A and Im trying to connect to the internet through the network bridge on computer A. Computer B (client) has two OS's installed, win XP and linux(tried with different distributions, didnt work). On windows XP everything is working, when i try to ping the router (after computer A) it also responds. On linux system nothing is working, and im not quite sure why.
I set up linux to receive IP adress from DHCP, which is router in this case (behind computer A), same way windows XP was configured. I decided to ask here, because I couldn't find anything on the net. My guess is windows-made bridge supports only windows-OS's but that would be kind of strange (its just a software bridge).
View 2 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
May 15, 2011
I have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
View 2 Replies
View Related
Jul 9, 2011
I have a wireless router, but my desktop computer is connecting to it, or maybe to the modem, by an Ethernet cable. It has a built-in wireless card, so just as an experiment, I tried to connect to my network wirelessly. It didn't work. And not only did I not get any internet connection, I can't get any internet through the wired connection either. The internet works fine with Windows Vista (I'm dual-booting), as well as when I boot up Backtrack off of a Live DVD. I can still access my router's config page by going to 192.168.2.1 on a web browser, but I can't access anything else.
View 1 Replies
View Related
Nov 17, 2009
I`ve got a network (192.168.1.0/24)with common internet gateway (gw 192.168.1.253).Everything works good and i have access to i-net through 192.168.1.253 from all loacl machines. Then I tried to make and internal server as a firewall for local subnetwork. It is CentOS 5.3 based.
Code:
[root@router etc]# uname -a
Linux router 2.6.9-89.0.16.EL #1 Tue Nov 3 17:15:02 EST 2009 i686 i686 i386 GNU/Linux
[code]...
View 4 Replies
View Related
Nov 3, 2015
As a random thought I purged the firmware-realtek package and rebooted. Ethernet works fine now??
Fresh Jessie installed this morning with KDE. Wired worked fine during installation and initial boot. Reboot after package installation and only wireless is working right now. I did install the realtek firmware as part of my normal package list.
This is /var/log/syslog when it stopped working, and hasn't reconnected since. Cable is fine as it was working perfectly with a live Ubuntu shortly before I installed the system with Debian.
Code: Select alllspci | grep Ethernet
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
Code: Select alldmesg | grep eth0
[ 0.882603] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90000c7e000, e0:db:55:b8:d6:a0, XID 1c800880 IRQ 56
[ 0.882605] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.958631] r8169 0000:03:00.1 eth0: link down
[ 2.958658] r8169 0000:03:00.1 eth0: link down
[ 2.958686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Code] ....
View 2 Replies
View Related
May 16, 2010
Situation: I can access Ubuntu from Windows XP but not XP from Ubuntu. When I try to access XP from Ubuntu I get message "Unable to mount location Failed to retrieve share list from server"
In System/Administration/Network Tools using Network device: Loopback Interface (lo) I can ping the IP address of the XP machine. Also, using Network device: Ethernet Interface (eth0) I can ping the XP by using its computer name.
In System/Preferences/Network Connections it shows under the Wired tab: Auto eth0 never used
Below are the settings in my smb.conf file.
## Browsing/Identification ###
workgroup = MSHOME
wins support = no
wins server = w.x.y.z
dns proxy = no
[Code]....
View 1 Replies
View Related
May 16, 2010
I installed a fresh Ubuntu 10.04 system. After first boot no wired network was found and no access to internet. However, in network connections there is eth0 present. All settings are as should be - IPv4 is in automatic mode and IPv6 - Ignore. I tested internet from another machine with Windows on it and internet connections is ok. I checked etc/network/interfaces and there is as follows: auto lo iface lo inet loopback
View 9 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
Sep 11, 2010
My father has configured his network and the computer has connected to the wired network. The problem is firefox says the server cant be found at the given address. The wired router says its connected to the network and yet firefox doesn't see the router admin page or network.
View 3 Replies
View Related
Apr 1, 2010
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!
View 3 Replies
View Related
Jan 11, 2010
I have the latest version of ubuntu on an HP dv4000 laptop fully updated. wireless worked out of the box. but the wired connection wont start. Problem is with the ubuntu install not the network. But i dont know how to configure it to work.
command: ifconfig
eth0 Link encap:Ethernet HWaddr 00:**:**:**:**:**
inet6 addr: fe80::***:****:***:****/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
[Code].....
View 1 Replies
View Related
Feb 16, 2011
I'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
View 3 Replies
View Related
Jul 1, 2010
I'm trying to connect to a data server (basically a big hard drive) in my lab with my computer. On the Mac that's at the workbench next to me, you enter Go -> Connect to Server. From there, enter the IP address that I have (I can't find a server name--just the IP.). It asks you which subsystem you want, queries you for a user name & password, and then opens a window with all the files. Meanwhile, on my Ubuntu machine, I have a "Connect to Server" option under "Places" on my main menu. But when I choose that, I need to select what kind of server it is, from several options that don't seem right. (It's not FTP, it's not SSH, it's not a form of HTTP, and that leaves "Windows share?") I've tried several things, but usually get back 'Cannot display location "smb://<IP-ADDRESS>/" The specified location is not mounted'. I've tried many ways of mounting this drive, but it usually gives me permission denied errors (even though I *know* I have the right login and password--I've logged in using the aforementioned Mac).
View 13 Replies
View Related
Jul 20, 2011
Just had an issue crop up where connecting wired network seems to stop wireless connections from getting an IP (happens on multiple networks both while the cable is plugged in and once it's been unplugged; also persists across reboots). Machine is a Dell Latitude 2120n with UnionFS running. Connection was working fine prior to the wired connection
View 3 Replies
View Related
Jul 13, 2010
I'm having a bizarre problem with FTP transfers from my CentOS 5.3 boxes, All of my CentOS boxes appear to be limited at ~10kb/s when connecting to any FTP server outside of our network. We have no network infrastructure which would cause this, however when I use a windows based machine it is able to connect fine.
I took my laptop running Vista, and rebooted it onto a CentOS 5.3 LiveCD, and same issue.
I have checked our iptables, cleared the rules, removed the kernel modules, checked CBQ/TC it looks like nothing is limiting this. Also, other protocols work fine. Both the windows and linux boxes used passive transfers for it.
Is there anything other than iptables/CBQ which would be on a out of the box install of CentOS I should check? Is there any kernel settings for NAT connections which may cause this?
View 5 Replies
View Related
Mar 6, 2010
my problem is that the wired internet is working on and off, or not even that, only when it wants too. I have googled and googled, which by the way is not loading at all at the moment, and have not found anything. And i really don't know what's wrong. Some more details: 1) Finished installing suse 11.2 with gnome, yesterday. Internet, and google worked fine right off the bat. I have a laptop and so i suspended it to see if everything was working. 2) Bring back the laptop, no internet. I reboot, internet works (google included). 3) I leave the laptop alone, it goes to sleep mode (or what comes after screensaver).
I bring it back, no internet, i reboot, no internet. So i go to windows. 4) Came back to suse, now, and i have internet and google does not load! This is all with wired internet, i haven't had a chance to try the wireless (there isn't a signal for me to try). However, i am positive it won't work with the luck i've been having. Also, a few days ago i had suse with kde and the internet worked continously. I know it can't be related to the GUI, but it's peculiar.
View 9 Replies
View Related
Apr 4, 2010
I'm new to OpenSuSE and have just booted up an Acer Aspire 4736z laptop with the 11.2 livecd. All of the specs (gathered from lspci -n) are available here: Debian HCL - Acer / Aspire 4736Z. Wired internet does not work. I have tried `modprobe atl1e` then `service network restart`to no effect. NetworkManager says nothing is plugged in (perhaps a hotplugging issue?). eth0 is listed in ifconfig.
View 3 Replies
View Related
May 26, 2011
Figured out a straight shot at connecting to the Internet in Fedora 15. Follow these commands.
1.)****** SWITCH TO ROOT USER if you don't have privileges*******
2.) cd /etc/sysconfig/network-scripts
3.) rm ifcfg-XXXXX (DO NOT REMOVE THE IFCFG-LO)
4.) system-config-network
-> Once in this screen, press the enter key on "Device configuration"
-> Configure your network statically. ( I did the following.) Name: leave as default Device: Leave as default DESELECT "Use DHCP" Set Static IP as 192.168.2.117 (or 192.168.1.117) Set NetMask as 255.255.255.0 Set "Default Gateway IP" AND "Primary DNS Server" to 192.168.2.1 (or 192.168.1.1)
[Code]..
View 4 Replies
View Related
Dec 26, 2009
Opensuse 11.2 - wired internet connection
I keep losing internet connectivity from within OpenSuse. I've had ubuntu/kubuntu beforeand never had a problem. I installed opensuse and now after a few minutes of browsing I'll lose my internet connection.I also dual boot into winXP without any problems.I noticed that when the connection is lost I can't even reach my router - which is where I'm getting the wired connection from.So it's not just the outside internet but the local network too. It only happens within opensuse.
View 9 Replies
View Related
