CentOS 5 Networking :: Connecting Server 5.3 To DSL Router?
Sep 3, 2009
I want to use centos as a developer server on my desktop before deploying my stuff to the internet.
I have a netgear DG834G router. It's IP address on my local network is 192.168.0.1 and connected to the adsl line. The router is set up to act as an dhcp server too. On the router I have reserved ip address for the nics per their mac addresses.
My server is on a dual boot desktop. The other boot is XP and works fine, picks up dhcp.
I don't know how to connect Centos to the router.
I have tried to play with the network manager but to no avail.
I can ping localhost, interface eth0 is there, but i can't ping to the router.
I have set the manager system/administration/network to get dhcp automatically.
I can't activate the eth0 although the hardware device says it is OK.
I've looked at firewall and iptalbes.
View 2 Replies
ADVERTISEMENT
Jul 13, 2010
I'm having a bizarre problem with FTP transfers from my CentOS 5.3 boxes, All of my CentOS boxes appear to be limited at ~10kb/s when connecting to any FTP server outside of our network. We have no network infrastructure which would cause this, however when I use a windows based machine it is able to connect fine.
I took my laptop running Vista, and rebooted it onto a CentOS 5.3 LiveCD, and same issue.
I have checked our iptables, cleared the rules, removed the kernel modules, checked CBQ/TC it looks like nothing is limiting this. Also, other protocols work fine. Both the windows and linux boxes used passive transfers for it.
Is there anything other than iptables/CBQ which would be on a out of the box install of CentOS I should check? Is there any kernel settings for NAT connections which may cause this?
View 5 Replies
View Related
Jul 30, 2011
1. Need to connect 2 CCTV DVRs and view from remote. 2. Can get a static IP address. But I dont know if this is a secure way since any once can view if the know the ip address. 3. Question is : is it possible to connect the DVR( s) to a linux server which will get user name and password before letting us view the DVR. Currently there is one set as follows: 1. From location X a device is connected to location Y using leased line and static IP (12 kms distance). In location Y a router is placed and port forwarding is configured. From Location Z using internet and remote desktop concept the device at location X is viewed and data captured. Is it possible to use a similar concept but with some sort of security authentication procedure in place.
View 1 Replies
View Related
May 5, 2010
When fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
View 3 Replies
View Related
Mar 11, 2010
I've had my PC connected to my router since I installed Ubuntu. My router has the address and name password for my ISP. I'd like to plug my PC directly into my ISP line, but the network manager won't find the connection, and I don't know how to tell my PC my ISP's address and the name and password to logon with. I set up my router, and I know how to make the connection in XP, but I don't know how to in Linux. I have very limited Terminal experience.
View 9 Replies
View Related
Jun 21, 2010
I have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
View 2 Replies
View Related
Jul 18, 2010
I downloaded wubi, installed ubuntu, and booted it up. Everything went smooth, it finished installing with no problems. It restarts again and I login. Firefox opens.....server not found.
That brings you to where I am now. It says that eth0 is connect. I manually changed the ip address, the netmask and gateway. Still I have no luck.
route reads as follows:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255
[Code].....
View 3 Replies
View Related
Oct 27, 2010
When I start Ubuntu at work it automatically connects to the router every time. At home the router signal is quite weak but manually connecting via NetworkManager Applet 0.8 was successful for a week or so. In the past week, however, although the router appears in the list in Network Manager, it has stopped working and is unable to connect. Nothing has changed with the router or hardware in that time.
This is a new laptop which had Windows 7 pre-installed. Windows 7 connects to the home router successfully every time. I really don't want to use Windows 7 but until I can get this fixed I have no choice.
I don't know if it's relevant, but once I tried deleting the AUTO Home connection from Network Manager and was then able to connect on the next attempt, but this has not worked since.
View 5 Replies
View Related
Jun 29, 2011
Is it possible to connect to a router via a standard phone cord?
View 13 Replies
View Related
Feb 20, 2011
I have an Actiontec GT724WGR and I am having problems with my Ubuntu server. I set up a subdomain on freedns.afraid.org with my main computer's external ip. However whenever I use the link that was made it goes to my router configuration page instead of onto my server. I have already set up a static ip for my server enabled DMZ hosting and under port forwarding applied every single rule that applied to servers.
View 2 Replies
View Related
Jan 5, 2011
I recently installed Fedora 14 on my machine. Ever since I cannot connect to the Internet at home.henever I plugin in the ethernet cable the ADSL router disconnects and all machines connected to the router lose connection to the Internet.
View 9 Replies
View Related
Oct 30, 2010
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies
View Related
May 3, 2011
I am using an HP dm3 1030us laptop. The wireless adapter is and Atheros 5009. I have a fresh and clean install of Ubuntu Natty in it. I am trying to connect to a Linksys WRT54G2 that is in G mode using WPA2 Personal with AES. Router info:
Router Information
Firmware Version: 1.0.01 build 003, Mar. 26, 2008
Current Time: Mon, May 02 2011 20:34:37
MAC Address: 00:22:6B:4A:44:DF
Router Name: WRT54G2
Host Name:
[Code]...
View 4 Replies
View Related
Jan 3, 2010
For several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.
View 3 Replies
View Related
Aug 13, 2010
Need help, ubuntu keeps connecting and disconnecting to my wireless router. whenever i am able to get it to connect for a significant amount of time, i still have no access to the internet.
using ubuntu 10.04
using Linksys router, not sure what model but can find out.
using toshiba satellite laptop
I am able to access my router and internet in Windows without any problem
dont have anything of importance on ubuntu install, so i could reinstall but would rather not so that i could fix this problem in the future.
View 1 Replies
View Related
Dec 8, 2010
I am having some bizarre problems with a 10.10 install which I am hoping someone here can give me a little input on. Some background info: I have a laptop which I had originally put 10.10 on about 4 weeks ago. I was using the Network Manager applet to change the MAC address by entering a valid MAC in the "Cloned MAC Address" field, and then connecting to a network. This suited me fantastically as the applet applies the MAC to any interface that connects - ie. the internal Intel card or the more often used external USB RTL8187L. For reasons which would take a lot of explaining (and now kicking ones self in the head) I had to install Windoze on the machine for a week to get some specific stuff done - but have now come back to 10.10.
The problem: So just as before, I installed 10.10, connected to my router (without changing MAC) installed system updates and other packages such as Macchanger etc and got the system working and customised how I like it. Problem is, now when I enter an address in the Cloned MAC address field and attempt to connect, the applet just sits there with the pulsing waves likes it's trying to connect but it cannot. Whilst this is happening, ifconfig -a shows that the MAC has indeed been changed. Until I remove the Cloned MAC address entry, I cannot hop on my router - or any other for that matter. Before, these steps were enough to ensure correct and functional cloning.
Things to know: This happens whether I am logged in as me or root. There is no MAC address filtering on 3 routers I have tested on (different brands). There is only MAC filtering on a 4th, and in that case, the cloned MAC is in the routers whitelist. This happens whether I specify IP details and if DHCP is used. All 3 routers without MAC control have been reset. All settings to do with wlan0/wlan1 in the network applet have been removed and re-entered. It happens on 2 different wifi cards (Intel and RTL8187L) but they worked before re-installation. I have also tried the usual commands in the terminal such as:
su
ifconfig wlan0 down
macchanger --mac (mac here) wlan0
ifconfig wlan0 up
also tried hwaddress ether 12:34:56:78:90:00 etc - The problem doesn't seem to be in changing the MAC, more the functionality of wlan0/wlan1 afterwards. I have also tried (although, it worked fine without this before) adding lines to /etc/rc.local and /etc/network/interfaces. It would be worth noting that either networking was restarted or the machine was rebooted after each alteration. No avail.
I can't think of anything significantly different that I have done to this re-installation compared to the first time, so I am not sure if perhaps in the time that it took me to reinstall 10.10, a package update has come out which has altered something and it's chucking a spanner in the works. Having said that, I even reinstalled AGAIN without applying any updates and same result. I would consider myself moderately experienced with Linux - so I am pretty sure that I am not making a complete n00b mistake... this situation is just so puzzling. I have been googling for quite some time and can find others with similar problems, but no actual solution.
View 9 Replies
View Related
Dec 15, 2010
I have installed Ubuntu x86 10.04 LTS onto an old Dell machine which is connected to my broadband modem and Netgear Wireless Router (WGR614 v6). The router is encrypted with 64-bit WEP and allows my System76 Pangolin Performance laptop to connect flawlessly out of the box. However, my sister runs Windows XP Professional 32-Bit on a Dell Latitude D830. This machine's wi-fi card is an Intel PROSet Wireless which recognizes the router but can't access it.
What should I do on her laptop in order for her to access the wi-fi router?
View 1 Replies
View Related
Jan 29, 2011
router comtrend CT-536T but now my laptop lenovo r61i is not able to connect to it. like it has a issue with wap/wap1. Is their a possibility to get it to connect. the other router maxG (US robotics) is wep/hex based. any suggestions ? It only made a connection the first time and after the signal wasn't even noticeable .
View 2 Replies
View Related
Jul 12, 2010
I have a Netgear DG834 ADSL router (v3) which I have used for a couple of years. Prior to that I had a v2 of the same router, but upgraded for the one that supports ADSL 2+ (here in the UK).
Recently I have been having problems with the connection often being dropped, and when I access 192.168.0.1 for the router admin page, when it is not working I get no IP address listed for that of the ISP's server, and sometimes as well the upstream and downstream speeds are listed as 0 kbps.
Usually this was resolved by rebooting the router.
However, for the last couple of days, when using Ubuntu 9.04, the page of the router at 192.168.0.1 will not load. I have tried numerous different browsers, and none of them will give the router admin page.
When I tried booting from a live CD of Fedora 13, the router admin page came up just fine, no problems (although still not getting a proper connection to the Internet).
I was going to try to use the older router I had, but so far, as I cannot access the router admin page in Ubuntu, I have not done so (not had the time, and now I am at work posting this).
So there must be a problem in Ubuntu that is preventing it showing the router's admin page. The Network connection details show that the router has given the PC an IP address of 192.168.0.6 and the DNS servers are listed, so I know that Ubuntu is talking to the router, but it is not allowing me to access its settings in any way.
View 1 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
Aug 14, 2010
I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies
View Related
Nov 27, 2009
I want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies
View Related
Nov 16, 2009
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies
View Related
Dec 20, 2009
I'm still learning my way around CentOS and linux in general... Using CentOS 5.4
BUT, I used the scripts from HowTo/Chroot Vsftpd and it did not work with the non-TLS script config, but the with TSL worked great. I wasn't sure where to put the vsftpd_virtualuser_config.tpl file but I copied it over when the script failed to find it... to where it was looking.
So I think it's working but my question is, TLS doesn't use port 21 but the script defaults to that port. I'm using FileZilla from an XP machine at work and I'm forwarding all the ports given in the HowTo. So I'm forcing the client to use TLS on port 21 but it hangs on the connection. If I use non TLS I get in but it tells me it requires TSL. I've had no luck with vsftpd in the past and this is my next attempt.
Quote:anon_world_readable_only=NO
anonymous_enable=NO
chroot_local_user=YES
guest_enable=NO
[Code]....
View 1 Replies
View Related
Dec 1, 2010
Whenever i try to create a account either then the root and login as it i get a error Access is Denied if though the password is correct.
View 3 Replies
View Related
Sep 8, 2009
I follow instruction on how to install ISPConfig2 in CentOS 5.3. CentOS 5.3 ISPConfig 2 At part 10. MySQL(5.0), I stuck with an error. Said that "Host is not allowed to connect to this MySQL server. What is the problem? Why not allowed?
View 1 Replies
View Related
Nov 21, 2010
I am working on a project where I need to connect to a remote MS SQL Server database with PHP from a CentOS 5.5 server. I was able to get it installed and working on my Mac OS X 10.6 laptop with unixODBC and FreeTDS. However, I am unable to get it configured on my CentOS server. unixODBC and FreeTDS were installed, but when I try to connect, I get the following error message:
Connection Failed:[unixODBC][Driver Manager]Can't open lib '/usr/lib/libtdsodbc.so.0' : /usr/lib/libtdsodbc.so.0: wrong ELF class: ELFCLASS32
From what I could find by scouring the internets,it appears that I have 32 bit unixODBC (or FreeTDS, I'm not sure) installed (libtdsodbc.so.0 is symlinked to libtdsodbc.so.0.0.0) and it needs to be 64 bit. However, when I try to install the 64 bit version with
yum install freetds.x86_64
I get a message that it is already installed.Is there something else I need to do to get around this error? I'm a developer and not a server, so I'm not sure where else to go.
View 1 Replies
View Related
Feb 27, 2010
I have a CentOS server that I can connect to over my local network. The computer I'm currently on is on that same network and can access the internet. My server can not connect to the internet. The network card is obviously connecting to the network since I can access the server locally with SSH or HTTP. While in the terminal for the server, I type wget google.com and the server can not find the specified host, so this leaves me to believe it can not access the internet.
View 2 Replies
View Related
Oct 6, 2010
want to connect a linux server using centos 4.8 onto a wireless router. then clients will access mails/internet using the wireless router. how do l go about it. anyone with an example
View 4 Replies
View Related
