Networking :: Access A Windows Server 2000 Machine Using A Machine Via KDE?
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
ADVERTISEMENT
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Feb 22, 2011
Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies
View Related
Aug 3, 2010
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies
View Related
Mar 1, 2011
I've run into a weird problem. Two of my linux machines (A and B, both running CentOS 5.5) are connected to the same wall ethernet socket via a hub. Bothf them are configured for static IPs. The trouble is that when machine B goes offline or hits a kernel panic, machine 1 goes offline too. What I've noticed is that in this condition the "route" output from machine A does not show any entry for the default gateway either The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 for machine A are:
Code:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0
[code]...
View 3 Replies
View Related
Aug 28, 2010
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
View 3 Replies
View Related
Jul 6, 2010
I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies
View Related
Jan 11, 2011
Just installed Ubuntu the newest release on my laptop . Im dual booting on my laptop. Vista or Ubuntu. I gotta say I love Ubuntu more than vista. I would much rather use ubuntu. My question is I cannot for the life of me connect to my main PC running Windows 7. Reason I want to do this is my PC running windows 7 has all my music which is rather large over 100gigs worth. Looks like it recognizes my PC but I cannot access anything.
Now In windows 7 I have disabled password and made it pretty easy to access files on there. When I boot into vista on my laptop no problem at all getting onto the network to access my main Windows 7 Pc. Any Ideas why Ubuntu can't get into my Windows 7 pc Through my network. Would love to do this that way I don't ever have to boot into vista. Ubuntu is great otherwise.
View 1 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Jul 30, 2010
I need to deploy Windows Server 2008 R2 onto a server that is currently running Linux. Effectively, I want to restore a Windows disk image onto the Linux system hard disk.I don't have physical access to the machine, so I need to find a way to do everything remotely, using SSH (no KVM). And the Linux machine only has one hard disk - the one containing the OS. However, I might be able to create a partition in free space at the end of the hard disk to store the image (I might need some help with the Linux commands). Or perhaps the image file can be pulled via FTP.
I tried Acronis but was disappointed to find that it doesn't seem to allow me to overwrite the system partition (unlike the Windows version of Acronis, which is capable of doing this with a restart).
View 1 Replies
View Related
Nov 2, 2009
he moved in a new place and there is a huge share on the network machine which runs windows... however he has fedora 10 installed on a desktop pc with a big screen and asked me to configure it so it can access the share... i have almost no experience with fedora and i've been trying to do this for two days now... i installed the samba package, but now what? how to do this because the exact commands are unknown to me... i have the root password and everything else on the network... so i just need to know what ot write in order to be able to mount all the TBs of information on the server...
View 4 Replies
View Related
Aug 18, 2009
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
View 5 Replies
View Related
Apr 26, 2010
For some time now, I have been backing up a windows box (data files only) to a ubuntu machine using the following:
mount -t cifs -o user=xxx,password=xxx //windowsshare/ /mnt/
For the first time I needed to restore some files and found I did not have the correct rights to write to the windows machine.
I had already wasted a whole day trying to map the ubuntu machine from windows and failed so this is not an option.
I have tried adding write rights to several accounts on the windows machine, also tried adding write rights to "everyone", checked both the share permissions, as well as the folder permissions.
I read about chmod, and tried to use the command gksudo to do something but this fails with DISPLAY error. Tried several things to fix this which didn't work and I was just going off on a tangent.
In the end I used a CD ROM to copy the files from one machine to another.
So for next time I need to restore a file, how can I give myself rights to do so?
View 4 Replies
View Related
Oct 8, 2010
I am running Ubuntu 9.10 on my desktop right now. I have an external western digital terabyte drive plugged into it. I am able to see it and view it fine. Let's work with my music folder for example. I want to be able to access this music from my Windows 7 laptop so that I may add it to my itunes. However, when I enter the \servershare from the windows 7 laptop it says that the "server" is found but the "share" seems to be invalid. I've checked this 20 times and setting the share name to "music". I've rebooted 2 times on each computer yet to no avail. If I make a share on the Ubuntu desktop I can access it from the laptop. So it seems like it just gets lost when looking inside the external. This was just working last week, then I had to blow away they win 7 lappy and now it just won't work!
View 2 Replies
View Related
Jul 15, 2011
I am unable to access samba share from my windows machine. I am getting the following error
View 9 Replies
View Related
May 31, 2011
I have a weird issue where all of the machines in my office can all connect to our web server, either via DNS or using the server IP directly. However, on my machine, which is using the same network IP as the rest of the office and I know it's not being blacklisted, I can't access the server at all via SSH or web or mail. I'm the only machine running Linux, I've flushed the network cache using nscd, but this made no difference. Can anyone think of what might be going on here?
View 10 Replies
View Related
Jun 8, 2011
I was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies
View Related
Mar 8, 2011
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
View 5 Replies
View Related
Jun 19, 2011
I have been learning about P2P networks and have been experimenting with all kinds of operating systems. I figured out how to share and access Windows shared files on other Windows computers.
Now I'm trying to access Windows shared folders from Linux operating systems.
Here's the deal. I created a shared folder on Windows 2000 Professional. I want to open it from Kubuntu 10.04.
I am not running Virtualbox. These are separate operating systems on separate computers.
View 2 Replies
View Related
Feb 23, 2009
i have been using samba to gain access into windows computer through my pc which has fedora 8 ..can i access the unix machine from another unix machine? is yes then what is the procedures ?
View 4 Replies
View Related
Aug 9, 2010
I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
View 4 Replies
View Related
Dec 9, 2010
I am trying to share files between my Windows XP machine and ubuntu server. I set up and configured samba following the instructions in the Online Ubuntu Server Guide. [URL] This is the abbreviated version of my smb.conf file here.
[global]
workgroup = HOME
server string = %h server
interfaces = 127.0.0.0/8, 192.168.1.101/24
# map to guest = Bad User
[code]....
View 15 Replies
View Related
Apr 16, 2011
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
View 5 Replies
View Related
Jul 23, 2010
I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies
View Related
Apr 8, 2010
So I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies
View Related
Feb 8, 2010
I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n
alias_maps = hash:/etc/aliases
biff = no
[code]....
View 1 Replies
View Related
Apr 26, 2011
When ever i access a windows machine through VNC from ubuntu. The icon changes and notifies the user that someone is logged into the system.Is it possible to hide that notification?
View 1 Replies
View Related
Mar 12, 2010
I want to access the Linux desktop from a Windows machine. I am able to get a terminal window with the TightVNC Windows client, but I only get a terminal window. Does anyone know how to get the entire desktop?
Also, from other discussions, it seems that I am supposed to be able to get a web session going, but I'm not sure how to do that. Does anyone know how to get a web session going through VNC? Do I need to run something other that vncserver?
View 3 Replies
View Related
Feb 24, 2010
I have installed Oracle Enterprise Linux Server 5 as host OS and Windows XPP(Guest OS) as virtual Machine by VMWare Player on standalone Desktop PC.Now I want to run all commands of Linux from Windows XPP.How should I proceed?
View 2 Replies
View Related
Feb 23, 2011
I've been told to setup a first ubuntu sw development pc in my office. Our network domain server is Windows 2000 Advanced. Are there any issues or limitations that would prevent this marriage? Will it be apparent when I crack open ubuntu? Maybe a link to this procedure? Is joining a workgroup equally simple?
View 2 Replies
View Related
