In fedora 10 I want to browse the share files in our windows network. When I want to use 'connect to server' with user name and password. It says:
"Cannot display location smb://servername/"
"No application is registered as handling this file".
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
I connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies View RelatedWe have a mac book connected to our network. It can surf the web and even get into our network files. However, these network files are on linux, and finding the open files (not password protected) is fine. But we need the mac book to get into the protected files to edit our media. When we connect to the linux server, there is a pop-up asking for a login. We enter the correct credentials that work for everyone else to get into our protected files, but these credentials don't work... There is a message that pops up: "This operation cannot be completed because the original file '<file_name_here>' cannot be found." But it found the other open files...? what do we do to get this to work? The macbook is 'os x' and the linux server is 'fedora 10'
View 1 Replies View RelatedMy network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies View RelatedProblem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:
"/usr/sbin/vpnc: no response from target"
No problem when connecting with ubuntu or windows.
I ran a yum update this morning on my Fedora 10 box (i386), which updated the 'nfs-utils' package from 1.1.4-4.fc10 to 1.1.4-6.fc10. Before the update I was able to connect to the fedora NFS exports just fine from my Macbook Pro running latest version of Leopard on a simple home network. After the update, when I try to connect to the NFS export it waits for a while at leopard's "Connecting to Server" dialog box, and after about a minute I get a message saying "Could not connect to the server because the name or password is not correct" (though my UID's are the same on both systems). My /etc/exports and /etc/sysconfig/nfs files were unchanged by the update. I tried restarting the nfs services as well as shutting down iptables and setting SELinux to permissive, etc. with no success.
I get the following in /var/log/messages (192.168.1.102 is the address of my macbook):
I was able to download the RPM for the older version of nfs-utils and then do a 'yum localinstall' to revert to the older version. This fixed my issues completely and my setup works as it did before. However I am curious to know why the latest version of nfs-utils breaks my setup, and whether it is a problem with my setup or if I should just wait for the next version to come out and see if the same thing happens.
Here is my /etc/exports file. If I understand this correctly it should allow connections from anyone with an IP address on my local network.
Do all ISP have DNS server?
View 4 Replies View RelatedOn Ubuntu (as with 99% of other Linux distros), CTRL-ALT-F7 brings you to your X display on tty7 (:0)...is there any way for me to get the display to appear on tty2 or tty3 instead of 7?
I ask because my ubuntu box is a media server running XBMC. XBMC has some 'flaws'...one of which is screen refreshing during certain tasks (other than watching a video)...the easiest way to get it to kick back into gear is to switch to a terminal, then back to the X display...not that big of a deal really..but the problem lies in the fact that the remote I use for the computer (simple USB IR Remote grabbed off of eBay) has buttons programmed for CTRL-ALT-F[1,2,3,4]. So, if I could get X to appear in CTRL-ALT-F2 for instance, I could easily switch back and forth without having to get up to walk to the keyboard.
Recently we have deployed a new server with ubuntu 10.4 64 bit, but I am now scp files to the server, the server is located in a another location the it says scp connect stalled and Idea about this.
View 2 Replies View RelatedI have a openvpn server configured and users are using from remote location. I got some errors in the /var/log/messages file as:PHP Code:
Dec 18 16:09:37system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Dec 18 16:09:37 system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS handshake fai
[code]....
I am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
I keep getting this, ever time I try to map a shared drive on other systems with my small network. 'unable to mount location failed to retrieve list from server'. This used to work.
Main System UNBUNTU 10.10, GNOME ver. 2.32
Sys2 Windows XP Pro, SP3
Sys3 Windows XP Home SP3
[code]....
Mine is used as a server for the above, and also for me to work on. For some reason, I keep getting permission failure. Setting up a share on sys2. sys3, sys4, sys5 can see and read it. My main sys cannot. None of the systems can see the Main one & the main one cannot read any of the others.
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
[code]....
i have two subnets with different gateways.i am thinking of connecting them via a linux server which would enable them to communicate.but i dont know how to proceed for getting this done.how should the connection be made and what should be the configuration settings on the linux server.
View 2 Replies View RelatedMy network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop.
THE REASON:I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
THE PROBLEM: After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message: Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
It seems this is a common problem. I used Samba to configure and connect the computer running Ubuntu 11.04 with my Windows Visa workgroup. This is a wired, not wireless, connection.
In Ubuntu, under Network, I can see the name of the other computer (NOVA_MORAI), but when I click, I get the error:
Unable to mount location - Failed to retrieve share list from server
I tried the nmblookup command, here is the output:
eleos@Planet-Morai:~$ nmblookup NOVA_MORAI
querying NOVA_MORAI on 192.168.1.255
192.168.1.2 NOVA_MORAI<00>
And:
eleos@Planet-Morai:~$ nmblookup -A 192.168.1.2
[Code]....
There it it. But when I try the findsmb command, it does not show up.
The error message seems common, but I have been trying solutions all day, and I am still not getting a connection.
I have a home server that I have setup to connect to via SSH. All is working well with that. I would like to have the home server access the internet through a VPN. However, if I do this, I am no longer able to connect to the server via SSH, even though I know what its IP address is.
View 1 Replies View RelatedI have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
i would like to connect from my home pc to my local machine at the university (fedora 12) behind a main university server(linux) through vnc. specifically,to connect normally through ssh/X to my local pc i have to ssh first to the main university server and then ssh to my local pc. Namelly:
ssh -Y -l loginname main.server.name
and then
ssh -Y my.local.machine.
On my local machine there is a vnc server running that I would like to access it from home (linux machine). Actually linux is running everywhere.
I want to use centos as a developer server on my desktop before deploying my stuff to the internet.
I have a netgear DG834G router. It's IP address on my local network is 192.168.0.1 and connected to the adsl line. The router is set up to act as an dhcp server too. On the router I have reserved ip address for the nics per their mac addresses.
My server is on a dual boot desktop. The other boot is XP and works fine, picks up dhcp.
I don't know how to connect Centos to the router.
I have tried to play with the network manager but to no avail.
I can ping localhost, interface eth0 is there, but i can't ping to the router.
I have set the manager system/administration/network to get dhcp automatically.
I can't activate the eth0 although the hardware device says it is OK.
I've looked at firewall and iptalbes.
I'm trying to connect to an XPpro machine using terminal server, I've been to the microsoft web sight and configured xp as they explain. Which consists of "allow remote desktop connections" and "re configure the fire wall", Done. I've obtained the ip address of the router and the user name and password of the xp machine and still I cannot access it!
View 6 Replies View RelatedI have been wanting to switch from my routers VPN to my headless linux box VPN. I have everything setup in the PPTP and then forwarded the ports to it. Heres the kicker. My APPLE Iphone connects to the VPN without a problem at all. Views Intranet pages etc.
My Windoz XP is kicking and screaming and one error after another. This is my setup on XP: I entered Ip Entered exact same credentials as used for connecting with my iphone turned off "use gateway on remote network" Changed type to PPTP VPN connecting my xp machine to this PPTP server on linux?
I've been experiencing some home web-server slowdown issues lately, and I wanted to see if it's a problem with the server itself. I'm not sure if this might be the problem, but upon checking netstat -tn, I see over 15 instances of the following:
[Code]...
where 192.168.2.9 is the server's local address, the local address port varies, and the foreign address is the server's web address. If anyone knows what might be causing this and/or how to fix i
I want to connect my linux laptop (Mandriva 2008.1 x86_64) to my windows small business server. My issue is that I am not sure what I can and can't do in terms of any windows config changes. Can linux (I assume using Samba) connect normally?
View 2 Replies View RelatedI'm trying to connect to a data server (basically a big hard drive) in my lab with my computer. On the Mac that's at the workbench next to me, you enter Go -> Connect to Server. From there, enter the IP address that I have (I can't find a server name--just the IP.). It asks you which subsystem you want, queries you for a user name & password, and then opens a window with all the files. Meanwhile, on my Ubuntu machine, I have a "Connect to Server" option under "Places" on my main menu. But when I choose that, I need to select what kind of server it is, from several options that don't seem right. (It's not FTP, it's not SSH, it's not a form of HTTP, and that leaves "Windows share?") I've tried several things, but usually get back 'Cannot display location "smb://<IP-ADDRESS>/" The specified location is not mounted'. I've tried many ways of mounting this drive, but it usually gives me permission denied errors (even though I *know* I have the right login and password--I've logged in using the aforementioned Mac).
View 13 Replies View RelatedI have setup an ubuntu gateway server by using four NIC cards.
eth0 :210.212.235.107 is connected to the internet
eth1 :192.168.1.222 is connected to the local network
eth2 :192.168.2.222 is connected to another network
Here 192.168.1.222 is the gateway for 192.168.1.0 network and 192.168.2.222 is the gateway for 192.168.2.0 network.These network configurations are working fine, but i want to block inter network communication ie from 192.168.1.0 network to 192.168.2.0 network,i want to block the communication for securing the local networks more.I know iptable rule is enough for this purpose .But i cant find the apt rule for this purpose.
I'm having a problem when browsing shares on other machines. If I hit alt+f2 and enter "smb://server" I get an error saying:
Could not open location 'smb://server/'
No application is registered as handling this file
If I enter "smb://server/share1" everything works fine. Typing the server name without the share name worked fine in Fedora 8, which is what this machine was running before I did a clean install of Fedora 10.
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI just installed Ubuntu server edition on to an old Dell desktop. The only problem is that I can't get the Internet to work. I have tried the following and I guess it doesn't work:
Code:
sudo ifconfig eth0 192.168.1.52/24 up
sudo route add default gw 192.168.1.1
Each of those commands don't give me any error and it would seem like everything works fine, until I try to ping google or any website and I get an error that tells me that no host was found. I am using version 10.04 of Ubuntu server.
I'm attempting to get 10.04 to connect to an SBS 2003 pptp vpn server, but for the life of me have been unable to find or implement a working solution. System previously had 8.x and 9.x and had no difficulty connecting to same server, but on a fresh install of 10.04 cannot connect.
tail -f /var/log/syslog shows the following:
Code:
Sep 10 15:19:32 ubuntu NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 10 15:19:32 ubuntu NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
