Ubuntu Networking :: Connecting To Wifi Using Terminal
May 3, 2011
im using minimal ubuntu 10.04 and im having trouble connecting to wifi using the terminal. the wifi worked perfectly on the desktop version. i followed this guide [URL] and looks like then i used '/etc/init.d/networking restart' and get this now it seems ive disabled wlan0 as $ sudo lshw -C shows
i tried to enable it again by using 'sudo ifup wlan0' but i get a few errors i think the 2nd errors may be because i tried to download another driver for the wireless using 'wget [URL] and then 'dpkg -i rt3090-dkms_2.3.1.3-0ubuntu0~ppa1_all.deb'
View 9 Replies
ADVERTISEMENT
Mar 29, 2010
I've happened across a wireless router that has a gateway address of 192.168.0.1 and allots IPs from 192.168.0.64-255. My laptop wouldn't connect to it automatically, so I was playing around and found that it needed 0.x instead of 1.x. I thought the network manager on ubuntu would have figured that out?! Now its a separate story that the router happens to have no admin password
View 4 Replies
View Related
Apr 1, 2010
I just installed ubuntu 9.10 in my freinds laptop and it has a realtek 81878 wireless card...it detects the wireless networks but when i connect it just keeps on asking for the authentication key again and again.
View 8 Replies
View Related
May 6, 2010
I updated successfully to 10.04 via wireless, then I downloadsynthesizer via wireless. The next day, today that is, can't get wireless to work. It keeps prompting mor the passphrase, I enter everything correctly, all the other computers in the house have no problem.
View 9 Replies
View Related
Dec 13, 2010
I am working with ubuntu (gnome) 10.10 maverick 64 bit on a HP pavilion 2713ca. I have installed the Broadcom sta driver for a BCM4328 wifi driver. After setting wpa security with my password, the wifi network worked for many weeks. However, in the last few days it does not connect no more. I have tried to reinstall SSID. And I have checked to see if eth1 was still there:
root@max-HP-Pavilion-dv2700-Notebook-PC:/home/max# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11abgn ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:14 Mb/s Tx-Powerff
Retry min limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
View 1 Replies
View Related
Dec 30, 2010
I'm using a HP mini netbook, and I recently installed Ubuntu on it. I updated and did the whole proprietary drivers activation and it now scans and sees networks but I am having trouble actually using them now. It says that it is connected to a wireless network but it never loads any pages.
View 7 Replies
View Related
Jan 8, 2010
I am a newbie trying to setup wifi using 9.10 on a compaq nx9010 . The driver is activated for the broadcom 4320 rev 2 chipset. the wifi light is on.I can connect to my neighbors's unsecured network, but not mine which is using personal WPA2 security.
I am using a lynksys Wireless-N Broadband Router WRT160Nv2 I have installed WICD and removed the gnome network manager WICD tries to validate authentication which fails. then it tries to obtain an ip address which fails. finally it says: CONNECTION FAILED: UNABLE TO GET IP ADDRESS". meanwhile it is showing the wireless network at 100% signal.
last nite tried changing wifi channel, changing to WEP, installed and tried WPASUPPLICANT and WPA_GUI. Unfortunately , nothing worked. The wifi controller was able to assosciate with the network but could not authenticate. I'm wondering if the passphrase that I type in on the computer is somehow being turned into a hexidecimal or something so that it does not match what the router has as the pass phrase.
View 6 Replies
View Related
May 27, 2010
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies
View Related
Oct 16, 2010
I am connecting from my WinXP laptop to my Ubuntu Server desktop using PUTTY. The laptop is using Wifi and the desktop is on a wire. I have a D-Link DI-524 wireless router. My session works fine for a while, and then freezes, sometimes after only a few seconds, and sometimes after many minutes. The same thing happens when I use VMWare Server Console to connect from the laptop to the desktop's virtual machines. Other connections between these machines under this setup (RDP, samba, SVN) do not experience problems. I usually do not experience problems establishing the SSH and VMWare connections.I have ended up using Windows Remote Desktop to connect to a Windows XP virtual machine on the desktop, and opening a PUTTY session on that machine. That's a nice workaround, but it makes it so that I have to have that VM running in order to have a reliable SSH session to the box
View 5 Replies
View Related
Jan 27, 2011
I've noticed that switching to Ubuntu about 6 months ago has made it noticeably more difficult to use the free wifi at my school. When I had Windows 7 on the same laptop, it was much easier to establish and maintain a connection. I know it's not the hardware. My question is: is there some security setting that makes it difficult to use public wifi on Ubuntu? Also, I don't have this problem at home on my WPA2 home wifi network.
View 1 Replies
View Related
Apr 28, 2011
Just installed ubuntu 11.04 and it all works fine. However, I got a big problem. When I unplug my ethernet cable and turn on my wifi my pc freezes?
All updates are done and there are no drivers. I'm using die eeepc 1001px.
A netbook isn't usefull without a wifi connection
View 9 Replies
View Related
Jun 5, 2011
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
View 8 Replies
View Related
Jul 22, 2011
I am using Ubuntu 11.04 desktop. I a, using my internet through wifi and it was working fine but suddenly it start strange activities... like when I restart ubuntu it work for few clicks but then suddenly stopp even wifi is showing connected but I cant use internet.
View 5 Replies
View Related
Apr 29, 2011
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
View 3 Replies
View Related
Apr 27, 2011
I need to reinstall my GUI but all I can access currently is a terminal, I have the encryption key and SSID but have found all the how to's I've read really confusing since following certain steps on them give me error messages, I'm connecting wirelessly to wlan0.
View 9 Replies
View Related
Oct 4, 2009
moved to Fedora 11 but can't figure out how to get my wireless working. I have the broadcom driver installed and the Network Manager Applet shows the available wireless networks, but when I click on them they just don't connect.I get the following output on lspci regarding the wireless adapter:03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
View 14 Replies
View Related
Feb 2, 2010
I'm trying to connect to an XPpro machine using terminal server, I've been to the microsoft web sight and configured xp as they explain. Which consists of "allow remote desktop connections" and "re configure the fire wall", Done. I've obtained the ip address of the router and the user name and password of the xp machine and still I cannot access it!
View 6 Replies
View Related
Apr 27, 2011
I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it. This may apply for other Universities with similar setups. It was impossible for me to figure it out on my own, I had to go back to my old 9.04 partition to get the info...
1) Open Terminal Server Client (Applications>Internet>...)
2) Insert as follows:
Code:
Computer: eDesktop.uwf.edu
Protocol: RDP
User Name: YOUR USERNAME
[code]...
3) OPTIONAL BUT RECOMMENDED click Save As and save it as a quick connect so you don't have to refer to this again.
4) Flip through the other tabs and configure as desired, and click Connect!
View 7 Replies
View Related
Mar 26, 2010
Is there a simple way to connect to wifi with terminal?
View 2 Replies
View Related
Jun 26, 2011
I am using an Asus R2 G32 Wifi Router. The CD's and the manual that comes along with the Router does not support Linux . Now the wifi connection was installed in Windows 6 months back with a password and but it got reset to default somehow. Now i want to set password again. Whenever i try to log in 192.168.1.1 in my browser, and Change the password and select Apply . Nothing happens to the page, as if it is static. No Submit Buttons work in this. Um a bit in mess ryt now as my wifi is vulnerable to any1 ryt now.
View 3 Replies
View Related
Feb 17, 2011
What would be the commands I'd use to connect to aWireless access point, enter the password and delete the wireless name I am connected to through terminal.I do know that the command nm-tool lists all wifi connection ports even my IP address field, just want to take it a step further...
View 2 Replies
View Related
Nov 16, 2010
Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.
View 2 Replies
View Related
Jan 13, 2010
I was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
[Code]...
View 9 Replies
View Related
Apr 15, 2011
I am having a bit of a problem connecting to a dynamic WEP WiFi network.
Code:
Apr 15 11:39:31 MyComputer NetworkManager[943]: <info> Activation (wlan0/wireless): access point 'MyUniversityWifiSSID' has security, but secrets are required.
Apr 15 11:39:31 MyComputer wpa_supplicant[1002]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
[Code]....
I have googeled that specific error about the WEP line, and it *was* a bug at one time, but according to the bug tracker, it has been fixed. Not so, me thinks.
So, does the specific error above look familiar and does anybody know of a way to fix it?
View 3 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
May 12, 2011
Just upgraded to Natty on both my desktop and netbook. Desktop upgrade was a breeze, and I'm liking the changes.Netbook isn't having such a good time however.First login after upgrade (using default gnome settings) played the login sound and froze. No mouse movement/keyboard response. I tried again with Ubuntu Classic - nothing. Finally Ubuntu Classic No Effects did correctly boot/login. I allowed it to perform a proper shutdown (was doing a power flip beforehand), and it was able to boot into normal Ubuntu Unity.
I enabled the wifi module using the laptop's keyboard shortcut, and Ubuntu searched for nearby networks. After finding my prefered network, it started to connect and threw the system into a command console abyss and froze. Tried again on the Ubuntu Class no effects, and it freezes on connecting to a wifi network. If the laptop crashes and I have to perform a power cycle, I can't boot into normal Ubuntu mode. I have to go back into Classic no effects.
Details
OS: Ubuntu 11.04
Previous OS: 10.04 Ubuntu Desktop Edition
Laptop: Asus Eee 1001P
Wifi Network: WPA2/AES/PSK
View 3 Replies
View Related
Jun 14, 2010
I have seen tons of threads on the internet about Ubuntu 10.04 having wireless issues but none of them have lead to me fixing the problem so I decided to come here. I have been able to connect to access points before but sometimes I have to reboot or reboot twice just to be able to see the wireless points and the enable wireless is always greyed out. And if I am connected to an AP or hardwire the connection drops frequently.
View 1 Replies
View Related
Oct 23, 2015
just installed Debian 8.2 on my ThinkPad X230 laptop using netinst. I installed only basic system and then install packages I need manually. Now I stuck with NetworkManager and Wi-Fi. NetworkManager and its applet (package network-manager-gnome) installed, I can connect to my Wi-Fi network, but after reboot a dialog asking for passphrase for keys appeared and even after entering correct passphrase NetworkManager does not connect to the Wi-Fi, so I need to connect it manually.
View 4 Replies
View Related
Jun 19, 2010
I have a Skytex SX-E700 netbook with a Linux system and I cannot connect to my Time Warner home wireless system. It will connect but the IP address is invalid. Time Warner has no idea how to fix it. Has anyone had this problem and figured out how to fix it? By the way -- I can't find any system info on this little netbook and can't seen to get into anything that tells me what it contains.
View 3 Replies
View Related
Apr 24, 2011
I've recently acquired an old HP Pavilion ZT3000 and have decided to install Slackware, but I'm having trouble with the whole rc.inet1 configuration stuff. I've been able to connect to the internet manually with the following command:
Code: iwconfig eth0 essid [access-point-name] key restricted [my-wep-key]
(...and then use "dhcpcd" to get an ip address.)
As you can see, eth0 is my wireless interface. Not exactly sure why (the comp has a IR port,wifi and Ethernet.) I'm using a shared WEP key (I know the security implications of WEP). The key being shared is the reason restricted is a parameter in the iwconfig command. I've been trying to get it working through /etc/rc.d/rc.inet1 but I can't seem to setup rc.inet1.config correctly I'm not sure where to set the key to "shared"
I've searched the forums and I could use the working iwconfig command with ./bash_profile as a startup script. This has the problem I need sudo (ie setup /etc/sudoer), which seems like a lot of work, when rc.inet should work. And it also has the problem of having to enter my password THREE times (login, sudo iwconfig and for sudo dhcpcd) which is horrible (and I don't even know how it would work when I set X to begin on startup again). I probably could also install "wicd" but having to ferry across files and trying to setup things without the internet is a pain.
View 4 Replies
View Related
