Ubuntu Networking :: Connecting Xp Machine To PPTP Server
Jul 8, 2011
I have been wanting to switch from my routers VPN to my headless linux box VPN. I have everything setup in the PPTP and then forwarded the ports to it. Heres the kicker. My APPLE Iphone connects to the VPN without a problem at all. Views Intranet pages etc.
My Windoz XP is kicking and screaming and one error after another. This is my setup on XP: I entered Ip Entered exact same credentials as used for connecting with my iphone turned off "use gateway on remote network" Changed type to PPTP VPN connecting my xp machine to this PPTP server on linux?
View 3 Replies
ADVERTISEMENT
Sep 10, 2010
I'm attempting to get 10.04 to connect to an SBS 2003 pptp vpn server, but for the life of me have been unable to find or implement a working solution. System previously had 8.x and 9.x and had no difficulty connecting to same server, but on a fresh install of 10.04 cannot connect.
tail -f /var/log/syslog shows the following:
Code:
Sep 10 15:19:32 ubuntu NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 10 15:19:32 ubuntu NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
View 1 Replies
View Related
Sep 17, 2009
I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
View 1 Replies
View Related
Sep 7, 2010
Having problems connecting to a work's VPN server.syslog output pasted here:
Code:
Sep 7 22:45:31 localhost NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 1771
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
View 2 Replies
View Related
Jun 29, 2011
I am trying to connect my pptp client Linux to a pptp Linux server using modem but no success. I can only tweak ppp linux side Observing the following log I found it�s due to MPPE Support configuration mismatch in pppd, pppd (linux client) is refusing to accept MPPE encryption.
pppd[24545]: pppd 2.4.5 started by root, uid 0
chat[24547]: abort on (NO CARRIER)
chat[24547]: abort on (NO DIALTONE)
chat[24547]: abort on (ERROR)
chat[24547]: abort on (NO ANSWER)
chat[24547]: abort on (BUSY)
[Code]....
View 1 Replies
View Related
Feb 2, 2010
I'm trying to connect to an XPpro machine using terminal server, I've been to the microsoft web sight and configured xp as they explain. Which consists of "allow remote desktop connections" and "re configure the fire wall", Done. I've obtained the ip address of the router and the user name and password of the xp machine and still I cannot access it!
View 6 Replies
View Related
Oct 6, 2009
I am a newcommer to Centos. I should connect to internet via a pptp vpn connection. I created the connection in "network connections". In other distrows I could connect to created pptp vpn connection simply by clicking on network-manager-applet and selecting the connection, but there is no network-manager-applet in Centos. Is there any way to connect to the vpn connection I created or I should go to do it by manually editing config files?
View 3 Replies
View Related
Jan 7, 2011
I am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
View 9 Replies
View Related
Mar 13, 2010
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
View 1 Replies
View Related
Aug 15, 2010
Im using 10.04 with network manager applet. This is the output i get code...
Why cant ubuntu connect me to a pptp vpn?
View 9 Replies
View Related
Jun 12, 2011
I am having trouble connecting to VNC server from any machine in my house. The server is running fedora v14.
Previously I was able to connect when i had dsl, but i have since switched to cable and am having a problem
I checked the vnc error log and saw the below error. Note these are excerpts from the file
I have checked
1. VNC server is up and running
2. My username is in the vnc file
3. the port i am trying to connect to is open.
[Code]...
View 1 Replies
View Related
Jul 7, 2011
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
View 2 Replies
View Related
Apr 29, 2010
How to create some sort of network, which would mean that one computer (Lubuntu in this case) is connecting to internet through second PC (Ubuntu), which is directly connected to cable, so maybe I get some manuals and tips. The computer which is connected to internet have two LAN cards (Realtek 8139 and integrated nVidia MCP65), Realtek card is connected to the internet provider cable (internet is tied to my computer's MAC address and uses static IP).
Second computer have also a Realtek card and it's connected to first computers integrated card. Anyhow - I've put on the first computer eth1 (which is integrated MCP65) IPV4 setting to "Shared to Other Computers" and IPV6 to "Link-Local Computers" and while I was having Windows XP on the second machine, setting on it (the XP machine) DHCP (or how was it correctly called, when system automatically resolves or gets the IP and the rest what it needs?), second computer was receiving Internet signal and I could use both of them in such way.
Now the second computer is with Lubuntu and I thought that I could do the same way as did on XP - just put in Network Manager for the connection (eth0) everything to automatical and there will be internet, but there aren't and the manager shows some kind of "Automatic Ethernet" option, which after activation also doesn't do anything. What do I have to do, to make my Lubuntu machine to recognize Ubuntu's eth1 and to use it as a source for Internet?
View 12 Replies
View Related
Jul 28, 2011
Has anyone got experience connecting a linux machine to a Microsoft VPN server using RSA authentication? What puzzles me perhaps most about this topic is the absolute dirth of information. If it is not possible, can anyone tell me why?
View 9 Replies
View Related
Dec 7, 2010
I have tripwire enterprise (not open source) agent running on one of my rhel4.8 web servers (I have actually tried with two servers with same results). The agent is a simple install rpm bin file and appears to be running as it should and the server for tripwire enterprise is set up accordingly. A windows tripwire enterprise agent is also on a windows machine that works perfectly well. But I cannot seem to get the tripwire server to talk to the agent on the red hat machine.
I can connect to port 9898 on the server, but the agent who also talks over the same port doesn't appear to be responding to the server on this port. There are no iptables set up to block the requests, there is no firewall set up (disabled) . Network team can see the packet requests being sent over the routers fine... So can't see why there would be a problem. So i reverted to the use of net cat.
Nc -l 9898 (on the agent machine)
Telnet <agent> 9898
But I get connection refused. Is there anything I could be missing here? Redhat is not my Linux of preference and it may be something obvious!
View 4 Replies
View Related
May 9, 2010
Tried to install pptp vpn server via webmin, and I tried connecting remotely from my laptop, but it keeps failing on the verify username and password - I get a error 778 it was not possible to verify the identity of the server. Not sure what could be wrong with the config..
View 1 Replies
View Related
Jun 24, 2011
Running Ubuntu 11.04 Server 32bit fresh install
I did this walk-through trying both iptables and ufw
I am able to connect to my VPN server using both windows 7 and Ubuntu desktop just fine, and using wireshark verify that all packets are being compressed and sent through the VPN tunnel.
Many sites work but there are several that will not load while using the VPN, one of them is ubuntu forums also sourceforge.
I can ping the servers while connected but the websites just will not load, and time out. The second I disconnect from the VPN they load instantly.
View 1 Replies
View Related
Jan 5, 2011
I recently installed Fedora 14 on my machine. Ever since I cannot connect to the Internet at home.henever I plugin in the ethernet cable the ADSL router disconnects and all machines connected to the router lose connection to the Internet.
View 9 Replies
View Related
May 8, 2010
I've got a FC PPTP server up and running but can't connect to it using VPN. I'm using NetworkManager but the connection fails each time. On the server, I'm seeing the following in the /var/log/messages:
Quote:
May 8 16:37:05 li99-23 pppd[2113]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
May 8 16:37:05 li99-23 pptpd[2112]: GRE: read(fd=6,buffer=8059780,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
[Code].....
Ive checked that the name,passwords all match, which they do. Has anybody seen this before ?
View 1 Replies
View Related
Dec 30, 2010
I'm trying to get a pptp server up and running. The server starts just fine, but encounters errors when a client tries to connect.
Code:
CTRL: I wrote 32 bytes to the client.
Dec 29 23:27:48 frankenstein pptpd[9402]: CTRL: Sent packet to client
Dec 29 23:27:48 frankenstein pptpd[9403]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd
[code]....
I assume the failed read line is the culprit. I am currently running on a test machine. There is no firewall. I read on this error points to a firewall misconfiguration, but there isn't one.
View 1 Replies
View Related
Apr 16, 2010
I'm trying to use a vpn server which uses pptp. I've set up pptp as per the Debian Howto and it seems to be working, but I'm not actually acessing the net via the server.Not sure what info would be useful but here are route -n and ifconfig.Can anyone suggest what is wrong here, and how to test if the vpn link is actually working?
View 6 Replies
View Related
Jan 24, 2010
I'm running an own PPTP Server, but I can't get it to access the internet. All my PCs at home run in the 192.168.0.0/24 net, the PPTP Server has local IP192.168.0.5 and remote IP 192.168.0.80-99. The router to the internet is at 192.168.0.1, and the IP of eth0 on the machine where the pptpd runs is 192.168.0.4. I want to be able to connect to the internet trough that VPN and access my local LAN servers (which works fine so far). I can ping internet and local IPs successfully, but can not access them with a browser, or connect to them in any other way. I have 'accepted' all in/output and forwards.
I am running a Squid proxy on the same machine, and if I do:
iptables -t nat -A PREROUTING -j REDIRECT -i ppp0 -s 192.168.0.0/24 -p tcp --dport 80 --to-port 3128
I can access the internet through Squid, but of course Jabber/ICQ etc. Won't work then because it just refers port 80. But I want the PPTP Clients to connect to the internet directly, if I don't use that rule it's not possible to load any pages. But pinging works all the time. DNS is also working fine, but I can't even access webpages via IP directly. How can I allow the PPTP IPs 192.168.0.80-99 to get direct access to the Internet with Iptables?
View 3 Replies
View Related
May 10, 2010
I am trying to connect to a windows 2000 VPN server at work, with my current settings in DOES connect to the VPN and i can ping the domain server which is 10.1.1.2 but the first issue is i cannot ping the other computers on the network(via hostnames) can't remember the ip address of the other machines . second issue is when the connection is established and i RDP into 10.1.1.2 ok great i am connected to the server but any interaction in the RDP session even moving the mouse on the screen kills the session and the VPN connection fails.
Running Ubuntu 10.04 LTS 64Bit
Image of current settings in network manager:
Syslog:
Code:
May 11 12:08:04 oliver-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
May 11 12:08:04 oliver-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code].....
View 1 Replies
View Related
Nov 11, 2009
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
View 2 Replies
View Related
Apr 2, 2010
recently i rent a xen vps intended to setup a PPTPD vpn server for me and my friends. so we can by-pass the great firewall in china and get back on ....., facebook and stuff. i have already setup the server and i can connect to it without any problem. but i still want to do some further configuration the server:
1. i want to limit the bandwidth to 400k/s per connection.
2. i also want to limit the max connection per user a/c
i have some thoughts on the 2nd requirement. in the user configuration file of /etc/ppp/chap-secret, you can specify the range of ip the user can get, does it limit the max connection per user a/c? or they can connect anyway, just every now and then a box pop up says conflict in IP address?
View 1 Replies
View Related
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
View Related
Jun 3, 2011
I have a home server that I have setup to connect to via SSH. All is working well with that. I would like to have the home server access the internet through a VPN. However, if I do this, I am no longer able to connect to the server via SSH, even though I know what its IP address is.
View 1 Replies
View Related
Jul 3, 2011
I am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
View 5 Replies
View Related
Jul 14, 2011
I've been experiencing some home web-server slowdown issues lately, and I wanted to see if it's a problem with the server itself. I'm not sure if this might be the problem, but upon checking netstat -tn, I see over 15 instances of the following:
[Code]...
where 192.168.2.9 is the server's local address, the local address port varies, and the foreign address is the server's web address. If anyone knows what might be causing this and/or how to fix i
View 1 Replies
View Related
Mar 26, 2009
I have setup an ubuntu gateway server by using four NIC cards.
eth0 :210.212.235.107 is connected to the internet
eth1 :192.168.1.222 is connected to the local network
eth2 :192.168.2.222 is connected to another network
Here 192.168.1.222 is the gateway for 192.168.1.0 network and 192.168.2.222 is the gateway for 192.168.2.0 network.These network configurations are working fine, but i want to block inter network communication ie from 192.168.1.0 network to 192.168.2.0 network,i want to block the communication for securing the local networks more.I know iptable rule is enough for this purpose .But i cant find the apt rule for this purpose.
View 1 Replies
View Related
