Ubuntu Networking :: Cannot Get Windows 98 To Access Linux Shares
Nov 9, 2010
when I try to access the shares from a Win98 laptop. The server name shows up in the Network Neighborhood (freaking childish names!) but when I double-click it, Win98 keeps asking me for the password for the \SHOPIPC$ connection. I have deleted the .pwl file on the Win98 and logged in using the same user/pass combination as I do on the Linux. On the Linux, I ran 'smbpasswd -a derek' and supplied my password.Windows XP sees the server just fine, but Windows 98 just does not want to play nice. Is there any thing that I can do to fix this without breaking the connection to the XP box or the Linux laptop?
View 9 Replies
ADVERTISEMENT
Feb 3, 2011
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
View 6 Replies
View Related
Jan 3, 2010
This is a bit of a shameless cross-forum bump, as I'm really trying to crack samba in the hope of getting some server action going, and this is the closest I've been to actually understanding what I'm playing with.
"Well, I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED"
If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling"As you'll see in my original fedoraforum post, the workgroup misreport issue mysteriously fixed itself after a few updates, although I'm inclined to blame my mate's Win 7 box...call it force of habit, I've just generally come to mistrust an OS that tries so diligently to shift focus away from its shell.
View 1 Replies
View Related
Dec 7, 2010
Ok this is a really weird issue because of the way it played it out. I have been researching it off and on for weeks now trying to figure it out and have come up with nothing. Basically when I first installed Ubuntu 10.10 (64 bit) I was able to access the shared files on my Windows 7 (64 bit) computer perfectly once I changed the domain name in Samba. However I wasn't able to access my Ubuntu shares from Windows 7. After researching for a while to figure that out, I found this:[URL]... Boom! Instantly I could access my Ubuntu shares without a problem from Windows 7.
However after I did this something happened where I could no longer access Windows 7 files from Ubuntu. Unfortunately I am not sure if the change happened immediately or some time later. When I go Places > Network I see the name of my Ubuntu computer (Living-Room) and my Windows computer (Nick-PC) as well as a folder called "Windows Network." When I open Nick-PC it brings up a dialog box saying a password is required. There are three text entry fields and a couple option:
Username: Nick
Domain: NRAU
Password: [not filled in]
_ Forget password immediately
_ Remember password until you logout
_ Remember password forever
The password field has to be filled in and I have tried every option. Each time it thinks for a second and then just pops the same dialog box again.
View 9 Replies
View Related
Oct 26, 2010
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
View 9 Replies
View Related
Jan 9, 2011
I'm trying to network a Ubuntu 10.04 laptop (192.168.0.11) with a VistaHome 64 desktop (192.168.0.10). I have full access to files from Ubuntu either connecting through Network or by Connect to Server. From Vista I can see linux-laptop under the network.I am trying to share /home/john/movies, /home/john/pictures, and /home/john/music. When I open linux-laptop I can see my shares. However when I try to access a folder lets say movies which is actually located at /home/john/movies I get the error "windows can not access \linux-laptopmovies". This stands true all shares. I think the path is defined incorrectly somewhere. To test this theory I created a file called john2 at root and shared it. I placed a nondescript .txt file in there. When I opened linux-laptop from Vista I saw among the other shares john2. When I tried to open that it allowed me and I was able to see the text file. I believe I have an incorrectly set path for shares somewhere on Ubuntu. I'm not sure if Im using samba or nfs or both. I can post smb.conf if needed.Also, sometimes Vista ask for a password. I have only 2 users on both machines with identical usernames and passwords both with admin access. Sometimes I get not allowed access error or i get users can not access more than one share at a time error.
View 5 Replies
View Related
Sep 25, 2010
I am running Linux Ubuntu 10.04 and I currently have this computer and another Windows 7 PC connected together in the same workgroup. When I look at the Network on the Ubuntu File Browser, I can see the windows 7 pc there, but when I try to open it, I get the message Password Required - it wants a username, password and domain (the domain box is filled in with the workgroup name). Whatever set of credentials I try to input, the box just pops up again asking for password. Password protected sharing is disabled on the windows 7 pc and I have even tried disabling Windows firewall to no effect. I am very new to Ubuntu and Linux and am therefore completely stuck - what I really want is to access a shared printer connected to the Windows 7 pc from the Linux machine.
View 9 Replies
View Related
Jan 27, 2011
I have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3
[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]
[code]....
View 16 Replies
View Related
Jul 13, 2011
My first post, having only installed 11.04 at the weekend on one of my old PCs.Everything is up & running pretty well, I have a 100BT home network with 4 Windows XP PCs and a Synology DS211j server.I can see & access these other shares from Ubuntu, but it's so slow to connect, approx. 45 seconds each time, compared to almost instant from any of the XP machines.Could someone suggest how this performance could be improved?
View 2 Replies
View Related
Jun 12, 2009
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
View 1 Replies
View Related
Jul 7, 2010
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
View 5 Replies
View Related
Jul 18, 2009
In the last couple of weeks I was trying to work thru some issues regarding access from my FC11 box to my WinXP box over the local network (Have had no problem using Samba to go the other way). I was trying to use smb4k and couldn't seem to make it work. Maybe that's because I use Gnome as my desktop (tho, I would guess that the install of smb4k would include necessary dependencies for KDE).I went back to this problem today and figured out how to access the window shares using Gnome Connect to Server function (Have tried it in the past but must have been doing something wrong). I now get the icon on my desktop and the appropriate listing in the Place menu.
What I notice is when I click on the icon (or select the share listing on the Place menu) to open the "folder" I get a duplicate of the icon on my desktop and duplicate listing on the Place menu. The window opens with access to the folder without any problem. If I close the window, it does so just fine, but I'm left with the duplicate icon and menu listing. To get rid of these "extraneous" items, I need to unmount the volume. Then the extra icon and Place menu listing are gone. If I already have opened the window and incurred a duplicate icon, etal., even if I close and then open it again, no more duplicates are added.Is this normal or is there a setting I need to change to keep this duplicate from happening.
View 2 Replies
View Related
May 16, 2011
My XBMC box has been working just fine for a few months. I could easily browse to the Windows shares located on a machine running Windows 7 both within XBMC and Nautilus. However, now I can't browse to the shares using either XBMC or Nautilus (via Places - Network). Furthermore, when using smbclient in terminal I get the following error:
Code: smbclient -L fileserver protocol negotiation failed: ERRnomem.I have tried using the IP number as well (the host is entered in the hosts file.I can ping the machine just fine, using either the IP number or the host name, but the ability to browse its shares is impossible. I can access the shares using another Windows 7 machine, so the shares are there.
View 2 Replies
View Related
Dec 19, 2009
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
View 4 Replies
View Related
May 25, 2010
I have a sitution that I am trying to set up.I have 2 email servers that run on Windows: one is for internal purposes, the other is external purposes.The external one will receive e-mail from the outside world, clean it up and forward it to the internal one.There are 2 Windows Vista machines and 2 Unix (OpenSuse Linux) machines.Since there can be only 1 email server per domain, I thought I would:
-> set up a local domain with ALL of the machines in it
-> set up a DNS server for the local domain
-> set up a MX record in the DNS server for the email
For the external machine, just have a Dynamic IP point to the Windows machine holding the external email server.Does this sound plausible? Does this make sense?How can one fix it so that a DNS under Suse is accessible from Windows?
View 1 Replies
View Related
Jul 28, 2010
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
View 9 Replies
View Related
Mar 8, 2010
I have both windows and linux in my system.I want to know how I can access linux files from windows.
View 6 Replies
View Related
May 5, 2010
My university has a central leased line that is split into wired and wireless. While plugged into the wired network i can access all the windows shares. However when on the wireless network, i cant access the wired shares. Windows laptops can however access them, but directly entering the share name ( \share-name)
I am using Ubuntu 10.04.
View 4 Replies
View Related
Aug 4, 2010
I am trying to access a shared printer connected to my Win7 PC from a laptop running Lucid Lynx. I have Samba installed and configured okay (I think) and I can browse the Ubuntu laptop from Windows but when I try to access shares on the Win7 machine I get a message NT_STATUS_UNSUCCESSFUL.
I've reviewed the security settings on the Win7 machine and tried turning off the firewall. I can see the Win7 computer on my network and ping it from the Ubuntu laptop but I cannot access shared folders or the printer.
View 2 Replies
View Related
Jan 13, 2011
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code:
peter@Desktop:~$ ls /net/10.2.1.21/
opt
peter@Desktop:~$ ls /net/10.2.1.21/opt/
sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
View 4 Replies
View Related
May 31, 2011
find that i cant access from my ubuntu box (desktop), now running 11.04 (i was able to access yesterday, when i tested the config). I CAN access from my XP and Win7 virtualboxes.and also from another win7 on the house.. So server is working good aparently.This is all i modified from the default config file:
Code:
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
[code]....
View 1 Replies
View Related
Jun 15, 2010
I had some issues with Wubi installations of Ubuntu, so I figured out how to create a LiveCD and to install from the CD. I am working on Linux now and I am having no issues as far as the Penguin goes. I hash-checked the iso and used older CDs more suited for booting.I chose to install from the CD, and I selected the option which partitions and installs Linux alongside Windows. I was prompted to import some user folders from my Windows Vista, and I agreed. These appeared in Linux and also work fine.
However, after a few hours of messing with my new Linux, I restarted and I realized all I have in my boot menu now are some Linux options, memory test, and a Vista loader & vista recovery. I had intended to have a dual boot system. Did I delete my Windows without meaning to, or can I change the bootloading process somehow to include both Linux and Vista?
Upon selecting the Vista Loader, I was asked if I wanted to recover my files, etc. I refrained because I wasn't sure what the effect would be on Linux. Is there a way to have both Vista and Linux show up normally in my boot menu, or will I have to go back and forth recovering every time I chose to use the other OS?The only reason I still want to use Windows occasionally is because I had Maple software in Windows which was useful for school.
View 9 Replies
View Related
Jul 26, 2011
linux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies
View Related
Nov 22, 2010
I am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
View 5 Replies
View Related
Dec 19, 2010
Everything was working well between my Windows 7 shares and all three of my Ubuntu machines. I just replaced my buggy belkin router with a Netgear one and now none of the Ubuntu machines can open my windows box through Nautilus. All three (one 10.04, 2 10.10) can see the Windows box but when I click on it I get the never ending password prompts. My Mac can access the Windows 7 machine fine, and all three Ubuntu boxes can access the shares with CIFS/autofs. I just can't browse the available shares using Places->Network. I'm lead to believe something on Win 7 reset when I changed the router but after two days I'm at a loss as to what it could be.
View 3 Replies
View Related
Feb 22, 2010
My question is probably very common, but I didn't find an answer.I have several computers, each with different user. Each user has a shared folder in samba. I want all users to access all these shares with a single login/password (not with the login/passw of each particular user)
View 1 Replies
View Related
Jan 6, 2011
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
View 4 Replies
View Related
Oct 9, 2010
I can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies
View Related
Aug 1, 2010
Simply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
View 9 Replies
View Related
Jun 8, 2011
I was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies
View Related
