Ubuntu Networking :: Windows Cannot See Shares ?
Aug 1, 2010
Simply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
View 9 Replies
ADVERTISEMENT
Jan 31, 2010
I've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
View 8 Replies
View Related
Feb 16, 2010
i have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
View 3 Replies
View Related
Feb 3, 2011
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
View 6 Replies
View Related
Feb 13, 2010
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies
View Related
Feb 27, 2010
I setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
View 7 Replies
View Related
Jul 9, 2010
Been trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
View 9 Replies
View Related
Aug 17, 2010
After running updates earlier today, none of my Ubuntu-based computers can connect to any Windows shares in Nautilus.Samba is running and working fine; I can access the shares via web browser using smb://hostname, so I know it's not an issue with Samba not working.Also, the two Windows-based computers can see each others' shares, including printers.
View 3 Replies
View Related
Nov 9, 2010
when I try to access the shares from a Win98 laptop. The server name shows up in the Network Neighborhood (freaking childish names!) but when I double-click it, Win98 keeps asking me for the password for the \SHOPIPC$ connection. I have deleted the .pwl file on the Win98 and logged in using the same user/pass combination as I do on the Linux. On the Linux, I ran 'smbpasswd -a derek' and supplied my password.Windows XP sees the server just fine, but Windows 98 just does not want to play nice. Is there any thing that I can do to fix this without breaking the connection to the XP box or the Linux laptop?
View 9 Replies
View Related
Dec 20, 2010
I have a machine with Windows 7 Ultimate with several shared folders. Then I have VMWare with Ubuntu 10.10 as guest running. Samba runs in Ubuntu and in Windows, I can see the shared folders of the Ubuntu guest (read and write) as well. This morning I saw the shared folder of the Windows host and I could still open it manually in the Ubuntu guest. After this, I wanted to mount the folders permanently with fixed entries in the /etc/fstab. This failed and now I can't see the folders of the Windows host in the Ubuntu guest..
View 3 Replies
View Related
Mar 3, 2011
My computer running Ubuntu 10.10 cannot see the Samba shares on either of my two Windows XP machines. I have Samba installed and configured, I am on the correct workgroup. However, under "Network", there is only one item - Windows Network, which contains no workgroups. I am hosting a share on this Ubuntu PC, but I haven't had the time lately to see if I can view it from the Windows XP computers. If I click Connect to Server, and enter the IP Address of one of my XP computers, I can connect to them. However, if I enter the computer's name I get "Failed to retrieve share list from server" without a specific share, and with it I get "Failed to mount Windows share."
View 2 Replies
View Related
Jun 13, 2009
I'm just staring with fedora 11 and I want to know how to do the following:
1- Connect to windows shares on another PC.
2- Set these shares to be accessible in the Computer location at all times.
View 2 Replies
View Related
Dec 8, 2010
My question is that I have a handful of servers, Server 1 is a Suse Linux machine and Server 2 is a Windows Server 2003 machine. I can mount and access the files/shares on the Linux machine no problem but when I come to using the Server 2003 shares I encounter problems ... here is a snip of my fstab ...
Code:
//10.0.0.20/applications /myfolder/applications cifs username=user1,password=pass1,auto,uid=user2,gid=group2,0 0
user1 and pass1 is the username and password of a user (local to the remote machine) and user2 and group2 are taken from the machine performing the mount.
Am I doing it right, is that how I should be mounting a share from a (Domain enabled) Windows Server 2003?
View 2 Replies
View Related
Jan 25, 2010
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies
View Related
Jan 3, 2010
This is a bit of a shameless cross-forum bump, as I'm really trying to crack samba in the hope of getting some server action going, and this is the closest I've been to actually understanding what I'm playing with.
"Well, I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED"
If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling"As you'll see in my original fedoraforum post, the workgroup misreport issue mysteriously fixed itself after a few updates, although I'm inclined to blame my mate's Win 7 box...call it force of habit, I've just generally come to mistrust an OS that tries so diligently to shift focus away from its shell.
View 1 Replies
View Related
Oct 23, 2010
When I goto Places->Network sometimes I see the other Windows computers in our house, and sometimes I don't. How do I make this more consistent?
When I double click on the "Windows Network" icon right now, I get "Failed to retrieve share list from server". Sometimes this works and I get to see the shares on the Windows pcs.
View 1 Replies
View Related
Dec 7, 2010
Ok this is a really weird issue because of the way it played it out. I have been researching it off and on for weeks now trying to figure it out and have come up with nothing. Basically when I first installed Ubuntu 10.10 (64 bit) I was able to access the shared files on my Windows 7 (64 bit) computer perfectly once I changed the domain name in Samba. However I wasn't able to access my Ubuntu shares from Windows 7. After researching for a while to figure that out, I found this:[URL]... Boom! Instantly I could access my Ubuntu shares without a problem from Windows 7.
However after I did this something happened where I could no longer access Windows 7 files from Ubuntu. Unfortunately I am not sure if the change happened immediately or some time later. When I go Places > Network I see the name of my Ubuntu computer (Living-Room) and my Windows computer (Nick-PC) as well as a folder called "Windows Network." When I open Nick-PC it brings up a dialog box saying a password is required. There are three text entry fields and a couple option:
Username: Nick
Domain: NRAU
Password: [not filled in]
_ Forget password immediately
_ Remember password until you logout
_ Remember password forever
The password field has to be filled in and I have tried every option. Each time it thinks for a second and then just pops the same dialog box again.
View 9 Replies
View Related
Dec 29, 2010
I just got my Ubuntu 10.10 laptop to finally be able to access my Windows 7 Professional's shares, and I'd like to share how I got it working. Whenever I would go to Places > Network on Ubuntu, and then double click on my Windows computer (sometimes after finding it in Windows Network > {workgroup name}), it would immediately bring up a box saying "Password required for {computer name}". My Windows password wouldn't work here, but I didn't even want to be asked for a password. In Windows, under Network and Sharing Center > Choose homegroup and sharing options > Change advanced sharing settings..., Turn off password protected sharing was already selected.
So, I eventually found out that samba (the program Linux uses to talk with Microsoft's SMB network share protocol) has a bug of sorts. The format of the SMB packets coming from a clean Windows 7 is known by samba. However, if you install Windows Live Sign-In Assistant (which is provided through Microsoft Update) on Windows 7, the packets coming from Windows 7 are modified, and samba can not handle this. A patch has been written for samba, but Ubuntu's repositories (which has samba version 2:3.5.4~dfsg-1ubuntu8.1) does not yet have that patch.
Also, it seems Microsoft has stopped Windows Live Sign-In Assistant from appearing in Programs and Features. It doesn't appear even if you specifically download and install it separately. I did, however, notice that the installer calls itself Windows Live Essentials 2011. So I found that in Programs and Features, and uninstalled it. It asked which components I wanted to uninstall, and I selected all of them. Rebooted Windows, and now I can access the share no problem. I also grabbed the offending packet using Wireshark before and after that uninstall. The packet is indeed different. Specifically, without Windows Live Essentials 2011, there is no mechToken in the packet.
The current version of samba available is 3.5.6. I may try downloading and compiling that later, and see if it deals with the change that Windows Live Essentials 2011 makes OK. Also, it may be possible to get the share working without uninstalling every single Windows Live Essentials 2011 component. You may want to try that if you would like to keep a component.
View 9 Replies
View Related
Mar 2, 2010
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
View 5 Replies
View Related
Jun 3, 2011
After booting, the sda5 and sda8 mounts work fine, but the Windows shares haven't been mounted. If I enter the command: mount -a everything works fine. I don't know if this a timing issue, or something to do with the new systemd stuff, but it has happened in previous Fedora releases from time to time.
View 1 Replies
View Related
Feb 7, 2010
We have an existing Windows 2000 network that I am trying to add an Ubuntu 8.04 server to. I have put links into the windows domain DFS to the linux machine's samba shares.
The shares work fine for local users that are physically on the same network (192.168.0.X). Remote users from other offices or dialing in with a vpn client can not access the these particular folders off the DFS. However, they can map them directly from the ubuntu server.
View 5 Replies
View Related
Oct 8, 2010
I have an Ubuntu Server 9.10 box running Samba 3.4.0. It has 4 shares, one of which is a CIFS connection to an XP machine, another of which is a password protected share. All the shares work fine and well. However, lately the client has called to say that "everything's hanging and freezing" when they browse the shares via Windows Explorer (approximately 30+ PCs on network, variety of XP, Vista and 7 OSes).
Not all users always experience the problem, and I remote in to test when I hear this via an XP machine, and today for the fist time I also experienced this problem - browsing literally sticks and hangs. No entries in PC's eventviewer. They are running on Netgear switches, all the same age, a couple of months old. A simple reboot and and everything's fine again for an indeterminable time, then I get another phonecall and an unhappy client on the end!
View 9 Replies
View Related
Oct 26, 2010
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
View 9 Replies
View Related
Nov 11, 2010
I'st just installed 10.10 on Virtual Box. I'm trying to map some windows drives (On the host) permanently. Using Places->Connect To Server etc I can connect to my windows box no problem and see the directories etc in Nautilus (2.32.0) all ok.But rebooting the system results in my having to log in again - I've looked atis that the only what to get this to work permanently?Also, and more importantly K-Develop (And possibly others) can't see this mapped drive when I want to open a file from it? What would be the problem here?
View 4 Replies
View Related
Feb 16, 2011
I'm using Ubuntu 10.04 and i can browse our network's windows xp shared folders properly using nautilus. The problem is if i double click a file on the network shared folder, (ie. a .doc file) its opened by file-roller and not Openoffice writer. i've tried changing open with in properties to ooo writer but it still opens with file roller. What can I do to open a file properly on the windows shared folder.
View 1 Replies
View Related
Mar 25, 2011
I also am having this problem so any help would be appreciated.
Personally, I don't know if I have anything set up correctly. That would be something I need guidance on if anyone can offer some.
View 3 Replies
View Related
May 4, 2010
I have beating my brains out trying to get Lucid Lynx connected to an SME Server 7.4 to automatically mount windows shares. The winbind stuff seems to work okay after I installed a restart script in /etc/network/if-up.d (kudos to OsGnuru & bobpaul for that) There is a short wait on network up before winbind can validate but that is not a show stopper. I have looked at (what I think) is the correct log for pam_mount and it seems to be running through to the end process okay. It looks like it is either not reading the pam_mount.conf.xml file or I have not configured it correctly as it just reports "No Volumes to Mount". I have appended the log file, pam_mount auth, password, session & common conf files as well as the pam_mount.conf.xml file for review.
View 1 Replies
View Related
Jan 15, 2009
We are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"
View 8 Replies
View Related
Sep 13, 2009
I have a machine acting as a gateway for a private network. While it can ping hosts on that private network, I can't use samba (smbclient or smbmount) to access shares on hosts on the private network from that machine. Other machines on the private network can access shares on other machines - just not the gateway server.
Here's how the gateway is configured:
When I try to connect to ports 139 or 445 (via smbclient or smbmount) the mount() system call times out. As I mentioned above, I can ping those hosts, so UDP packets work but TCP packets seem to get blocked or lost.
View 1 Replies
View Related
Dec 11, 2008
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies
View Related
