find that i cant access from my ubuntu box (desktop), now running 11.04 (i was able to access yesterday, when i tested the config). I CAN access from my XP and Win7 virtualboxes.and also from another win7 on the house.. So server is working good aparently.This is all i modified from the default config file:
Code:
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT # from UNKNOWN (>) # Date: 2009/06/12 14:15:15
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares. 2. Scheduling backup of some mount points with rsycn to store data in remote hard disk 3. User and group administration, with sudo access. 4. Creating and Managing Xen Virtual machines and giving access to other project teams. 5. Automating some tasks with Shell Scripting. 6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
I can't access some folders on my samba share. For example I set the Video folder to share and to allow creating or moving files. But inside the video folder I cant access some folders. This only happened after I upgraded my samba client.
it's driving me nuts. Done a few things now, including this last: [URL]that didn't work. All the other comps in the house are windows 7, and I want this box to be my file server, with two 1 TB HDD plugged into it via USB, but I can't get the damn samba to allow access to everyone. Here's the path in the config file:
[data] comment = Test sharing path = /media/Shared
I recently upgraded my ubuntu samba fileserver to 10.04 along with increasing the size of my RAID 1 /home directory.I am using the same smb.conf file setup I have used on intrepid ibis setup and hardy heron setup before that.On my new setup, I can see the ubuntu server on my windows 7 machines, but I can't see the shares and can't access them.In checking the logs (/var/log/samba), one log continues to look for a printer share from one Windows machine that I have not set up on samba yet.
I have found a few people who have reported similar problems online, even a few who have filed bugs, but then they say "my computer started working suddenly. I don't know what happened." so they closed the bug. or "my computer started working after I rebooted my machine." I have rebooted all machines on the network. That doesn't fix it.
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
I have had server running for over a year and have run into my first major issue. I am no longer able to browse to the server by hostname or IP and view all available Samba shares. I receive a windows popup informing me I do not have permissions However I am still able to browse to the shares themselves \hostnameshare.I am currently assuming this is an issue with the config of the samba share module/
First off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..
I recently switched from centos to fedora as my server choice. Probably not the best decision but I like trying new things. Now before I switched I had my samba server setup just they way I wanted it. Now I'm having a hard time getting it back to that way. Here is my smb.conf
Code: [global] workgroup = workgroup netbios name = netbios name server string = Linux Server security = user wins support = yes encrypt passwords = Yes domain logons = yes [homes] comment = Home Directories browseable = yes writable = yes valid users = %S
[me] path = /home/me read only = no public = yes create mask = 0777 directory mask = 0777 browseable = yes writable = yes
Now I did throw away my old smb.conf because it wasn't that complicated and I figured I could reproduce it.. aside from that everything is working except for the fact that I can access any share I want to listed without it requesting a password. I have a username and password setup with smbpasswd and I think everything else is setup correctly involving samba shares but I have no idea why it won't request a password.
i have 3 shares on my samba. i have users - user, manager and boss projects is RW to everyone reference is R to everyone RW to manager and boss Proposals is RW only to boss, no access to others However when boss logs in and creates a directory in projects share, the directory can only be renamed bu users and manager, and directory contents are read only for users and managers, even deletion / rename is denied. How can i make sure that when ever boss creates a directory in projects, it retains base folder permissions and is writable to user this is my samba file... i am using red hat 6.1 with samba 3.5.6 (i think)
i want to access to my samba shares index (or contents) trough http. something like this: [URL] i read something about aliases...i wrote this in the httpd.conf:
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
I have an Ubuntu 9.10 Samba file server. I have set up Ubuntu 10.04 netbook remix in a home network which also has Windows XP home and Vista computers already present in the network. The XP and Vista machines have no problem accessing the file shares.
The server is running mhddfs with FlexRaid. The security is set to share level access. I have a hosts allow line in the smb.conf file to permit access to certain IP addresses and have added the 10.04 netbook remix IP address to this hosts allow line.
I cannot access shares from the 10.04netbook remix machine if the hosts allow line is active, but have no problem from the windows machines. If i comment out the hosts allow line, all machines can access the share, including the netbook remix machine. I am fairly new to Linux and would appreciate any help in solving this problem.
I have setup Samba shares on my Ubuntu 10.10 and assigned different different username and password combination for each share.
The sharing works perfectly fine on all the Windows machines but it does not work on OSX. When I try to connect using OSX, it ends up showing waiting icon (screenshot attached) after entering username and password. (It asks for the login details after selecting the share from the list)
Following is my smb file content:
Code: # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the
I'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
I setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300] path = /media/Secondary Storage available = yes browsable = yes public = yes writable = no
[500] path = /media/New Volume available = yes browsable = yes public = yes writable = no
i have a file server running kubuntu and samba, when i plugged it into a different router, the router assigned it a different IP address (as I expected - its using DHCP) - but the old router was supplying 192.168.1.x type IP's and now the new router is suppliing 10.0.0.x type addresses.I now cannt see the samba shares on the file server.the computers can ping each other and they have working connections to the internet
I use Ubuntu 9.10 on my laptop and Vista Premium on my two desktops. Until recently I was able to view and access my document files on my desktop from within Ubuntu. I can no longer do so.
Been trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
I'm trying to setup two samba shares on ubuntu server 10.04.1 lts x64
The first is a Read-Only share for windows users that doesn't require a password. This i've managed to do so far.
The second is a Password protected Upload share. So far I am able to have both shares (which access the same directory) but am unable to log in to the pass word protected share.
I know i'm not doing things quite right, and would like a little bit of help
The smb.conf file is the default ubuntu file with these added shares:
Just set up Ubuntu 10.4 AMD64 on an old machine. We have an existing Ubuntu machine acting as a SAMBA file sharer. The other machines, windows and ubuntu have no problem in accessing files on the server. This machine reports that it can see the server on the network but instead of the expected data we see what is on the local machine. I admit I am out of my depth with SAMBA.
I have a NAS running Samba. My Samba shares are accessed from a Windows computer, it works very well.
With the kubuntu 10.04 computer, things are different : I can see the Samba shares in Dolphin, and copy files to the local drive, but lots of applications don't allow me to open a file on a Samba share.
Some applications such as OpenOffice let me browse to the share but refuse to open the remote file
Some other applications don't let me browse to shares at all.
What's up with that ? Surely I'm not the only one wanting to access files on a NAS ? How do other people do it ?
PS I chose kubuntu 10.04 because the 10.10 install hangs, the "ui" workaround I saw here and there did not work, the only solution offered was to go back to 10.04
I have some samba shares working where all I did was right click on the folder, enable sharing and enable guest access. These work fine.
However, when I tried to use the manual way:
[URL]
to create samba shares, so that they would be password protected, I cant access them. In windows 7, the shares are visible so I click them, click "use another account" and type in my samba name and password I created, but I can't access them.
Here is smb.conf
Code: # # Sample configuration file for the Samba suite for Debian GNU/Linux. # #
So my brother has a home network that is setup with multiple workgroups (don't ask why - I have no idea and he refuses to change it). Anyways I just installed Mint 9 (Ubuntu 10.04) on my mother's computer and I need it to be able to access the fileserver in her house where her data is stored. The Mint system is part of the default workgroup and can only see one other system in this workgroup.
The workgroup the file server is a part of is called "hobnw", the server's name is "fileserver", and the share I want to connect to is called "TV Shows" How can I connect to this network share on Linux? (I also know the username and password) When I browse the network under nautilus all I see is the default workgroup and no others. All of the Windows systems on the network (Windows XP, Vista, and Win7) all see and can access the file server without issues.
I'm having trouble setting up samba to work with my vista machine. Whenever I try to mount certain shares I'm getting error 13- permission denied. Specifically, I'm trying to mount my entire C: with this command at the console:
The funny thing is that I CAN mount some other shares, but not all. My distro is slack-current. I've been following as many relevant threads on this issue for a while now and have tried as many of the suggestions as I could understand, but it's getting to the point that I've lost track of what I've tried and what I haven't. Things I have tried:
Checking permissions on the shares: seem to be ok enabling encrypted passwords: not sure if I did it right. editing the registry for LmCompatablity
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
