Everything was working well between my Windows 7 shares and all three of my Ubuntu machines. I just replaced my buggy belkin router with a Netgear one and now none of the Ubuntu machines can open my windows box through Nautilus. All three (one 10.04, 2 10.10) can see the Windows box but when I click on it I get the never ending password prompts. My Mac can access the Windows 7 machine fine, and all three Ubuntu boxes can access the shares with CIFS/autofs. I just can't browse the available shares using Places->Network. I'm lead to believe something on Win 7 reset when I changed the router but after two days I'm at a loss as to what it could be.
My question is probably very common, but I didn't find an answer.I have several computers, each with different user. Each user has a shared folder in samba. I want all users to access all these shares with a single login/password (not with the login/passw of each particular user)
Been having trouble connecting to the internet and i am no longer being asked for password/keyring prompt at start-up. Something the prompt comes up 5-15 minutes after start-up.
I even manually set 'password at login' but it doesn't even ask me for that?
ps: over here
HTML Code: https://wiki.ubuntu.com/LucidLynx/ReleaseNotes
i found something about Avahi potentially causing a conflict with network configuration - so i typed the following command and am now online at least:
sudo stop avahi-daemon sudo sed -e '/^start/,+1s/^/#/' /etc/init/avahi-daemon.conf
I recently switched from centos to fedora as my server choice. Probably not the best decision but I like trying new things. Now before I switched I had my samba server setup just they way I wanted it. Now I'm having a hard time getting it back to that way. Here is my smb.conf
Code: [global] workgroup = workgroup netbios name = netbios name server string = Linux Server security = user wins support = yes encrypt passwords = Yes domain logons = yes [homes] comment = Home Directories browseable = yes writable = yes valid users = %S
[me] path = /home/me read only = no public = yes create mask = 0777 directory mask = 0777 browseable = yes writable = yes
Now I did throw away my old smb.conf because it wasn't that complicated and I figured I could reproduce it.. aside from that everything is working except for the fact that I can access any share I want to listed without it requesting a password. I have a username and password setup with smbpasswd and I think everything else is setup correctly involving samba shares but I have no idea why it won't request a password.
I use Ubuntu 9.10 on my laptop and Vista Premium on my two desktops. Until recently I was able to view and access my document files on my desktop from within Ubuntu. I can no longer do so.
Ever since my upgrade to 10.04 I no longer have Samba shares to my WinXP system(s).I have searched the forums high and low and for the life of me cant figure out what I am doing wrong.I am not able to see my XP system from Ubuntu, nor see my Ubuntu system from XP.Attached here is a copy of my smb.conf.
I have been reading guides for a while now and so far have not found an exact solution to my problem.
I want a linux user (dave) to be able to switch to another account (patrol) without a password prompt, but dave must still be denied access to root. Patrol must also be denied root access.
In the sudoers file
Code: User_Alias Patrol=dave,john root ALL=(ALL) ALL Patrol ALL=(patrol) NOPSSWD: ALL
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT # from UNKNOWN (>) # Date: 2009/06/12 14:15:15
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares. 2. Scheduling backup of some mount points with rsycn to store data in remote hard disk 3. User and group administration, with sudo access. 4. Creating and Managing Xen Virtual machines and giving access to other project teams. 5. Automating some tasks with Shell Scripting. 6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I'm trying to do the normal setup of sharing some dir's on my linux machine using samba, to allow a windows laptop to access them.
I've managed to get the printer shared and this is allowing to send print jobs, which come out beautifully! however the actual file shares still aren't accessible
Depending on my settings, if I have security = user then when I access from the windows machine I get a username and password box - I dont want this functionality, I want the system to access right away as it would between two windows shares.
If i change security = share then it simply lists the shares, but tells me they are all inaccessible.
I've googled and searched here, tried various different things but I just can't see why/where its asking me for the username/password combo.
My university has a central leased line that is split into wired and wireless. While plugged into the wired network i can access all the windows shares. However when on the wireless network, i cant access the wired shares. Windows laptops can however access them, but directly entering the share name ( \share-name)
I am trying to access a shared printer connected to my Win7 PC from a laptop running Lucid Lynx. I have Samba installed and configured okay (I think) and I can browse the Ubuntu laptop from Windows but when I try to access shares on the Win7 machine I get a message NT_STATUS_UNSUCCESSFUL.
I've reviewed the security settings on the Win7 machine and tried turning off the firewall. I can see the Win7 computer on my network and ping it from the Ubuntu laptop but I cannot access shared folders or the printer.
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code: peter@Desktop:~$ ls /net/10.2.1.21/ opt peter@Desktop:~$ ls /net/10.2.1.21/opt/ sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
find that i cant access from my ubuntu box (desktop), now running 11.04 (i was able to access yesterday, when i tested the config). I CAN access from my XP and Win7 virtualboxes.and also from another win7 on the house.. So server is working good aparently.This is all i modified from the default config file:
Code: ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account
Has anyone else encountered the really irritating issue of a hidden WPA network not auto connecting, and prompting for the root password when you manually select 'Connect to hidden wireless network'?
It works fine if I enable broadcasting of SSID but a proviso of my broadband is to keep this disabled. Ubuntu does it without any issue, can't figure out why it won't work on FC14.
My Pug Server has worked faithfully for many years just sitting in a closet. It is designed wo that you never need to add a monitor or keyboard as it is administered through a web interface. Recently it had a problem with the motherboard and I had to replace it, but the machine is now working. However, it no longer is visible as a network drive on my Windows machine.Unfortunately I have no idea where to start looking to see what the problem is. I did attach a keyboard and monitor and logged on, but everything looks okay (I can see my files, etc.).
This is an old machine (c. 2003), so has an old version of Linux (I have no idea what version, or even how to find out). Since it is never meant to be used directly it doesn't have any GUI installed, so I have to do everything using command line.Does anyone have any suggestions as to how I can even start to determine what the problem is or how I can go about trying to fix it? At this point I would be happy just to get the files out and replace it with a newer NAS.
when I try to access the shares from a Win98 laptop. The server name shows up in the Network Neighborhood (freaking childish names!) but when I double-click it, Win98 keeps asking me for the password for the \SHOPIPC$ connection. I have deleted the .pwl file on the Win98 and logged in using the same user/pass combination as I do on the Linux. On the Linux, I ran 'smbpasswd -a derek' and supplied my password.Windows XP sees the server just fine, but Windows 98 just does not want to play nice. Is there any thing that I can do to fix this without breaking the connection to the XP box or the Linux laptop?
I am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
hello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
This is a bit of a shameless cross-forum bump, as I'm really trying to crack samba in the hope of getting some server action going, and this is the closest I've been to actually understanding what I'm playing with. "Well, I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED"
If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling"As you'll see in my original fedoraforum post, the workgroup misreport issue mysteriously fixed itself after a few updates, although I'm inclined to blame my mate's Win 7 box...call it force of habit, I've just generally come to mistrust an OS that tries so diligently to shift focus away from its shell.
Ok this is a really weird issue because of the way it played it out. I have been researching it off and on for weeks now trying to figure it out and have come up with nothing. Basically when I first installed Ubuntu 10.10 (64 bit) I was able to access the shared files on my Windows 7 (64 bit) computer perfectly once I changed the domain name in Samba. However I wasn't able to access my Ubuntu shares from Windows 7. After researching for a while to figure that out, I found this:[URL]... Boom! Instantly I could access my Ubuntu shares without a problem from Windows 7.
However after I did this something happened where I could no longer access Windows 7 files from Ubuntu. Unfortunately I am not sure if the change happened immediately or some time later. When I go Places > Network I see the name of my Ubuntu computer (Living-Room) and my Windows computer (Nick-PC) as well as a folder called "Windows Network." When I open Nick-PC it brings up a dialog box saying a password is required. There are three text entry fields and a couple option:
Username: Nick Domain: NRAU Password: [not filled in] _ Forget password immediately _ Remember password until you logout _ Remember password forever
The password field has to be filled in and I have tried every option. Each time it thinks for a second and then just pops the same dialog box again.
A couple days after an update to Ubuntu 10.10's networking stuff I was unable to connect to my wireless network that had a password. Now, I can connect to a different connection that doesn't have a password but when I try to go to mine it doesn't work.
Running on a compaq nc6000
And yes I do know that the password is correct as I am connecting right now on Win7.
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
I have a home network and I use Samba to share files. Now when I am on the network, I can see the shares just fine, but if I use a crossover cable, I cannot see or access the folders or files.My goal is to use a crossover cable from one computer with clonezilla to my server in order to use Samba to make an image of my workstation and save the image on my server.But everytime I try to connect with clonezilla I get a persmissions error and the share will not mount. I tried going to the shell and mounting as root, but that did not work either.
I have another server which is only a console and it works though I am unsure why. The share though is a mounted usb drive while on the one that does not work, it is on the internal hard drive.I was wondering if anyone had any ideas or anything I could try to narrow down the problem. Oh, I can access the share using ssh, but not samba. One other thing, the shares are set to allow read/write access to everyone so I don't see why I can not access it.
can no longer access the internet,Deleted Network Manager thinking I could reinstall it and it would be back to its default settings. Had not been able to get online for days. Offcourse now I can't get Network manager back as I have to be online for that. I think I had stuffed up the proxy settings but can't work out how to get that back to default either. What do I do now and how do I do it?
I am new to using Ubuntu 10.10 that was installed by a friend of mine, but he didn't give me a password for administrator and now when I try to install VLC I am blocked by a password prompt. To make things worse I can't use F1 key, esc key, tab key, 1key (I copy and paste 1 from other pages when I need it). I am at a loss here and all I want is to change the administrator password without validating the current password first.
I have web application running on my server and can access this over the GUI.
This morning I can no longer access the gui interface. The activity LED flickers non stop on my nic card. I cannot ping or ssh into the server. However can access it directly from console and system is responsive when doing that. So i think this is a n/w issue... Any thoughts? How can I troubleshoot this?
