This is the issue, and I have had this happen with a few card readers. I have a Alfa Usb Wifi adapter model number AWUS036H using the rtl8187 Chipset. It works fine, unless I plug in my flash card reader directly to the board. If I plug it in to a hub it works fine until I put a card in, I was also having the same issues using a USB Video Capture unit by the name of EASYCAP. This was also happening in XP. Must be some driver conflict of sorts.
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
Ubuntu 9.04 running on a Dell C640 with a Dell TrueMobile 1150 wireless card. Works perfectly under XP. Ubuntu can't find it. Wired networking finds the internet perfectly (though I'm still working on getting samba set up correctly for file/print sharing on my XP LAN).
I'm thinking I need a driver, maybe? Can't seem to locate one.
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
I've just installed Ubuntu 10.04 on my old X30 alongside my fully working 8.04 and have strange wifi problems under 10.04 (under 8.04 it worked out of the box): - no available networks are shown - running "sudo iwlist scanning" results in "eth1 Interface doesn't support scanning : Device or resource busy" - without any wireless configuration from my side I get this: sudo iwconfig eth1 eth1 IEEE 802.11b ESSID:"gxC6isQxFFJxEC)xCDxBAxAB xF2xFBxE3F|xC2TxF8x1BxE8xE7x8DvZ.c3x9FxC 9x9A" Mode:Managed Frequency:2.467 GHz Access Point: None Bit Rate:11 Mb/s Sensitivity:1/0 Retry short limit:8 RTS thrff Fragment thrff Encryption keyff Power Managementff Link Quality=90/70 Signal level=-8 dBm Noise level=-147 dBm Rx invalid nwid:0 Rx invalid crypt:63 Rx invalid frag:0 Tx excessive retries:1 Invalid misc:0 Missed beacon:0 A very strange ESSID there appearing out of nowhere...
Im looking for a pci wifi card for my media pc, I would prefer wired, but we are moving soon , so i dont want to take the time to run a wire through the house. Im looking for one that will work out of the box with Ubuntu.
so I had to reinstall Ubuntu.But now my Wireless card won't work. It used to work before (plug and play), and I have no problem with it when I boot from the CD.I cannot use my cable connection because as soon as I plug my computer in, the network crashes, the router doesn't respond, gets hot and refuses to work until I unplug it and let it cool off for 2 minutes.I'm using Ubuntu 10.10, Desktop PC.
Code: :~$ lsusb Bus 001 Device 002: ID 0846:4260 Netgear, Inc. WG111v3 54 Mbps Wireless [realtek TRL818B]
Reading recent posts, it seems that 11.04 has seriously screwed wifi. I have an Advent QRC430 laptop which worked perfectly until I upgraded to Natty. Now wifi is broken. The wifi driver is rt73usb. When I run lspci in terminal, no wifi card is listed. Running rfkill shows wifi hard blocked, but the switch on laptop makes no difference. I've installed and run Hardware Lister - this shows wireless interface "has been disabled"
I have discovered the world of freewares not long ago and it surprised me! To go a bit further, I have installed Lubuntu 10.4 LTS on an old laptop: HP Pavilion zv5326 with 256 Mo RAM.
Everything works fine except the wifi.
iwconfig returns for wlan0: IEEE 802.11b ESSID:"Livebox-afe5" Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm Retry Long Limit:7 RTS thrff Fragment thrff Power Managementff
Ifconfig returns nothing for wlan0
From what I understand, my wifi card is recognized so I do not need to install a driver with ndiswrapper, right?
What should I do then? Is there a solution at all?
(Livebox-afe5 is the wifi connection I use with my other laptop.)
i m using backtrack 4 in vmware.i want to use my laptop in built wireless card to search for the near by wifi access point which it is not doing,, my wifi card is " Intel(R) PRO/Wireless 3945ABG Network Connection"
I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.
My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU). It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
I LOVE Ubuntu,but the sketchiness with WIFI in Ubuntu is really frustrating (not that it's Ubuntu or GNU/Linux's fault necessarily). I'm trying to find a good WIFI card replacement for my girlfriend's MSI Wind u90, but seems both the Intel 3945abg and the Intel 4965agn - the cards usually recommended for that model - seem to be spotty at best in all recent versions of Ubuntu including the last long-term release. Has anyone had success with a Broadcom 1020 (in any laptop but especially in a netbook)?
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
I have an old Toshiba Satellite A30 Notepad. I've installed Ubuntu 10.04 onto it and everything but WiFi works. I've installed wicd and several other network tools but just can't get Ubuntu to let me use the WiFi connection (the option is greyed out).I know the card works because the last OS (Windows XP) used it without any problems. The card is detected, the drivers are installed and the hardware (slider) switch is set to on.I think the issue is related to the Radio Frequency Kill Switch being on but I don't know how to turn it off.The output from various commands are:
Im living in a student-city where we get one internet-cable in the wall each, if we need more we are told to use a switch. But, since ive got some tech that depends on wifi, I was wondering if its possible to setup my ubuntu to work like a sort of wifi-switch?
Basically, Im not allowed to set up anything that resembles a router..(so no dhcp) all i need is what a switch would do, only wireless and wpa/wep would be very nice
Atm ive got my cabled network plugged into my onboard ethernet-port, and ive got a d-link DWA-556 (Atheros AR5008 I think) wifi card that i wanted to use to share my connection. is this doable?
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
I already have a wifi card- the netgear wg311v3. that had almost NO linux compatibility, so I won't make the mistake of buying any old wifi card again. What I want to know is, what's a good wifi card for Linux. Here are some requirements I have for it:
Preferably 802.11n support, but I could settle for "G" Out of the box support. As in, I don't have to use Ndiswrapper. Just pop it in, and let ubuntu do the rest I would prefer a USB based dongle, but PCI would be good too. I don't have any brand preferece.
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
I have a problem to configure my wifi card, a dwa-110 from D-Link, it is not recognized when I launch System / network device control (only ethernet connections appear), and it is the same thing in Administration / network / network configuration. But if I launch administration / hardware / system devices, the last line is "Ralink 802.11 bg WLAN"... When I try to add in the window "network configuration" (from above) some new stuff, I specifying the kind of hardware (wireless) and when I have to enter the name of the card I don't see my card. On other OSes, I used ndiswrapper, but I wasn't able to install it on CentOS (dependencies required and it's hard with only a USB key to install the stuff...) How to see if the card is recognized, if I have to use ndiswrapper and so on. I have an internal PCI network card also, maybe it is this card which is recognized.
Windows says I have a intel wifi link 1000 bgn card however lspci list it as a intel wifi link 100 series. I can not get it work right and does not seem to be recognized.
