Ubuntu Networking :: Fujitsu Amilo Does Not Seem To Recognize The Wireless Card
Feb 7, 2011
Just put Ubuntu 10.10 on my Fujitsu Amilo Li1818 and it does not seem to recognise the wireless card. If I click on the network icon in the top bar there is no mention of wireless.
My laptop is an Amilo a1650 on which I've very recently installed Ubuntu 9.10. It's worked out fine so far, except that I can't get the wireless card to work. It's an internal Broadcom BCM4318. Where do I start with configuring it?
installed Opensuse 11.4 onto the Fujitsu Amilo L7320GW laptop, and all works well except for the headphone jack. Sound works from the laptop speakers and when the headphones are plugged in the sound is muted from the main speakers, but no sound via the headphones.I've looked at other threads within the forum, and it appears that editing the 50-sound.conf file has helped other people, however the soundcard is a Realtek ALC655 (chipset VIA VT82xx), and l cannot see a listing for the ALC655 within the alsa/HD-Audio-Models.txtListed below is the information requested:-[URL]
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Today I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
I have an Amilo Pa2548 laptop with build-in wireless usb adapter. The wlan-adapter should be this:
Quote:
lsusb Bus 002 Device 002: ID 0bf8:100f Fujitsu Siemens Computers
I installed ndiswrapper and installed the driver sis163u.inf (XP compitable) as some guide said I should. Blacklisted the bcm43xx-drivers and restarted a few times. Nothing has happended. I have no wireless.
My laptop is an Amilo a1650 on which I've very recently installed Ubuntu 9.10. It's worked out fine so far, except that I can't get the wireless card to work. It's an internal Broadcom BCM4318. Where do I start with configuring it?
I've just installed Ubuntu desktop 10.10 on a Fujitsu Amilo laptop but it does not see any wireless network. It recognizes the wireless card but I don't know how to activate it or whether the drivers are already installed..
I have just installed ubuntu 11.04 on an "old" Fujitsu-Siemens Amilo Laptop. This computer does not have an internal Wi-Fi adapter but got Connect2Air WLAN E-5400 USB adapter that was working perfectly on the windows partition.After the ubuntu installation, p54usb was complaining about not founding isl3887usb driver in dmesg. I followed instructions found on launchpadI installed the ubuntu-firmware-nonfree package from synaptic and rebooted the laptop.dmesg showed that the card is detected and loaded correctly as a Wi-Fi adapter and in the network manager I can see broadcasted wireless networks.I tried to connect to both an open (unprotected) and a WPA network without any success.
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
i'm run'n knoppix 6.5 (i think) from a usb stick. under 'ifconfig' it finds 'eth0', but when i put in 'iwconfig eth0' it says: 'eth0 no wireless extensions'. i've tried other linux live cd's but to no avail...interestinly enough, when i run a linux (ubuntu) live cd on my virtual pc it hooks up(?..i figure bcuz its reading from da virtual ethernet?) further more, i researched it to the conclusion that the driver is not being detected. i tried ndiswrapper (under 'puppy') but tht didnt work either ( i've downloaded the lastes version of ndiswrapper and i plan on trying it again w/ the installation disk of the wireless card). however, even in my research i've seen there seem to be a difficulty in getting this particular driver to work? (netgear wg311v3 - wireless g pci adapter) how i can over come this problem? i'm kinda new @ linux, but i like the challenge. it doesnt matter wat linux system (the responder) i'll download it. but i'm really trying to get 1 online cuz i have to learn how to work the packaging systems.
I had Karmic a while back, but i got rid of it becasue of my Bcm4312 Wireless Card would not recognize the STA driver, or bcm43xx.In that time i learned a bit of command line stuff. anyways now that I have my internet working, I was just wondering What I could do with ubuntu. I am interested in the command line and Programming. Where could I learn more about the 2 subjects?
How do i get debian to recognize my wireless card? i have one built right into my laptop after some messing around on the terminal i believe it is a code...
I can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card BCM4322 When I enter /sbin/lspci -nnk Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
I just did a new install of slack 13.1 and i cant seem to be able to get my wireless card up. my system is a new ish dell laptop,a vostro 3700 to be honest im not even really sure where to start here. if i ifconfig i only get my ethernet and my loopback and if i "iwconfig" i just get told that i have no wireless extensions. yeah not sure what else to add.
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
i have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
Windows says I have a intel wifi link 1000 bgn card however lspci list it as a intel wifi link 100 series. I can not get it work right and does not seem to be recognized.
I have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
I had F14 up and running as a server working awesome. I shut it down and moved it. Now on start up, system doesn't seem to recognize my ethernet card...eth0. How to get my ethernet card back online?
My problem is the computer does recognize the wireless connections but when I put the wep key It just start trying to connect and then asks for it again, and this goes on and on and on. I'm pretty sure I got the key right so I have no idea whats going on. This happened to me to with the previous version of ubuntu and also with fedora and installations in virtual pc, or virtual box. Even normal installations with partition. This time I'm using wubi. I didn't get anything with the grep part, I must have done something wrong.
1) PC Brand and Model: Easynote MX65 P 057 2) Wireless brand, model and chipset:
Using grep in lspci -nn I got this: 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Just in case I'll put the whole information: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) .....
I'm trying to get Kismet up and running with Ubuntu 10.10 and I'm using an Atheros AR928X, but I don't know what to put in the etc/kismet/kismet.conf file under the line source=
Do I need to install madwifi drivers, or are the drivers that come with Ubuntu sufficient enough? I've been reading other forums and on Google that I should put source=madwifi_g,ath0,madwifi but my device is not ath0, it's wlan0 as shown with the lspci command.
Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping.
[Code]....
In some other forum on UbuntuForums someone said to make some changes under SYSTEM>>ADMINISTRATION>>HARDWARE DRIVERS, but I don't have HARDWARE DRIVERS under that submenu. I don't see an option for it anywhere in my version of Ubuntu (Maverick 10.10).