Ubuntu Networking :: AW-NE766 (Ralink 2860) Not Detected?
May 13, 2010
I have an EEEPC 1000HE that has an AzureWave AW-NE766 wireless card. As far as I know, the card is based on the Ralink 2860 chipset.
It always worked fine under eeebuntu 3.0, but I just installed Ubuntu NBR 10.4 and now it's not detected at all.
Kernel : 2.6.32-22-generic i686
lspci and lshw show no mention of wireless card at all. Network-manager and wicd both show wired connections, but no mention of wireless at all.
I followed the instructions on the "Solved" post to install the latest Ralink driver from Jan 29. It all went fine, except "ifconfig wlan0 up/down" and "ifconfig ra0 up/down" both return "ERROR while getting interface flags: No such device"
how to tell Ubuntu that I have a wireless card in there?
View 1 Replies
ADVERTISEMENT
Aug 23, 2010
I have Debian 5.0.3 and I've had a lot of trouble installing Linsys WMP600N PCI card - Ralink chipset - 2860. I had it installed in the board, before I installed/compiled Debian. What I'm thinking I should have done was chosen Desktop and Laptop during the guided install. I tried expert install, but I was over-whelmed with options. Anyways, I tried NDISwrapper in many different ways. My last tries showed that the driver and device was working. No matter what I did, I would never get an interface with a wireless extension. I couldn't find any useful information anywhere, including Ubuntu forums - I'm sure you think I'm stupid or evil.
I eventually figured I would get the drivers directly from Ralink website. [URL] The one that looked like it would work (RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890) would error out when I would try to extract anything. I used 2nd one (RT2860WebUI) which worked. If anyone does use it, be sure to read all documentation that is included, including the README. After I was done installing/compiling it, I got ra0 interface and could see my router.
I couldn't connect to it because I use WPA2 and that wasn't an option for encryption. I will work on that later. I wanted to share this information with anyone who might need this.
View 1 Replies
View Related
Oct 28, 2009
Just discovering Linux. Couldn't expect everything to work right away, of course. I has some issues with the x11 (the GUI wouldn't show itself), but have gotten around that. Next is WLAN. I have a Motorola USB stick whose chipset i've identified as the Ralink T2501.
It won't show up in YAST as a WLAN adapter, but does in the USB devices attached. I've procured what the sticky advised, and this is it:
HTML Code:
40: USB 00.0: 0000 Unclassified device [Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_148f_9021_noserial_if0
Unique ID: CiZ2.Q1gxt8A0_KF
Parent ID: uIhY.3f5c44ENLJ9
[Code]....
Anyway, i've downloaded the necessary driver (rt73), but don't want to leap into installing it before i consult you guys. Where do i go from here?
View 9 Replies
View Related
Jan 30, 2010
Out of all the Linux I have tried, this is the only one which will hibernate and startup again properly. But it has no drivers for the rtl2860 wifi adapter. I am thinking of using NDIS wrapper, but it may stop hibernation working. I see a guide which I am going to try to follow, but has anyone out there got this adapter working and hibernation still works?
View 2 Replies
View Related
Jan 22, 2010
I have a rt2500 wireless USB adapter ( WLI-U2-KG54-AI ). I tried to use it on 2 computers loaded with Ubuntu 9.10. It worked well in WEP mode, but I am now trying to connect to a WPA router and the connection fails (the network manager icon keeps rolling forever). WPA works well on those machines when using another wireless adapter (not rt2500 based). This adapter also works well with WPA under windows. Is this device supposed to work with Ubuntu in WPA mode
View 9 Replies
View Related
Jul 17, 2010
I am running Ubuntu 10.04 (32-bit) on a MSI A5000 which appears to have a RaLink RT3090 wireless card. So far everything seems to work except the Wireless card.
The problem is that no option for wireless appears in the network manager, it only shows the options for wired connection. This computer does have a button on the front to enable/disable wireless and I have confirmed that is is on, as there is a green indicator light showing this.
Can anyone tell me the status of the RaLink RT3090 with Ubuntu 10.04? I have looked through various posts here about getting this card working with earlier versions of the OS, where complicated procedures with mixed and apparently intermittent results are described. Do these measures also need to be followed with 10.04?
I have attempted several older solutions found in assorted threads here and I am still unable to get the card to even so much as show up in the network manager. The proceedure which seemed the most promising is here [URL]
View 2 Replies
View Related
Aug 19, 2010
I am trying to get my usb wireless to work on Ubuntu 10.4 I found a how to and followed it but when I did a Make install this is what I got.
make -C /home/ronald/Downloads/DPO_RT3070_LinuxSTA_V2.3.0.4_20100604/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/ronald/Downloads
[Code].....
View 5 Replies
View Related
Jan 18, 2011
It was recommended for my older Compaq desktop with a Celeron processor and 256mb of ram. I got the windows driver installer installed, but it was looking for a inf file and the driver I have on the cd is an executable file for an installer, so it wouldn't work. The cd also has a linux driver, but I do not know how to use terminal to install it. I'm at my wits end. I feel pretty stupid, because I know nothing about linux.
View 9 Replies
View Related
Feb 1, 2011
I've followed these instructions exactly but when I get here: Quote: Reboot and you should see an ra0 interface when you run the command 'ifconfig'
[Code]...
View 9 Replies
View Related
Feb 13, 2011
I downloaded a ralink driver for my wireless usb adapter and just need a bit of help installing the driver (RT3572USB)
View 9 Replies
View Related
May 16, 2011
i am trying to get skylink 802.1n usb wirless adapter working under ubuntu 10.4 lts.https://help.ubuntu.com/community/WifiDocs/WiFiHowTowell, it seemed to see something at first:
user@host:~$ lshw -C network
WARNING: you should run this program as super-user.
...
[code]....
View 2 Replies
View Related
Apr 19, 2010
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
View 1 Replies
View Related
Dec 27, 2010
I bought an USB-WLAN stick, which does not recognize any network. A Ralink 802.11 bg WLAN Stick works fine, but the Ralink 802.11 n WLAN Stick does not work unfortunately. Both get recognized by the nm-applet of network manager but only the first one recognizes my network and is able to connect to it.
[Code]....
View 2 Replies
View Related
Feb 5, 2011
Just built a new computer and I think I somehow need to activate my wireless card to get it working.The hardware seems to show up. I get "Wireless Networks" in my network manager but it is grayed out and says disconnected. I think it is an easy fix I just cannot find it.
[Code]...
View 4 Replies
View Related
Feb 12, 2011
Ralink's drivers for wireless adapters [url] with .dat-file to configure default properties of used WiFi adapter (at my case - RT2870.dat).
Example is below.
I'd want to fine tune adapters (I have two of them) to get maximum performance for streams between two WiFi clients connected to my router (JWNR2000 at my case).
At the moment I have changed WirelessMode=6 to force 802.11n mode (and it does work). Speed between WiFi-clients is about 3MB/s now. I want more How to?
Code:
View 1 Replies
View Related
Aug 4, 2011
I have new emachine 1401 and I can't get it to connect to wireless. It does detect networks but when connecting keeps asking for password over and over and never connects. I don't have wired connection at all and the wifi router is not managed by me, so I'm retyping output through my windows xp samsung netbook which works over the same wireless network...
I have tries some other solutions I found around here (install bcmwl-kernel-source, rt3090-dkms_2.4.0.4, blacklist rt2800pci...) so it's not original configuration but behaves exactly the same.
[Code]..
View 2 Replies
View Related
Sep 1, 2011
I installed the driver from Ralink (2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO) and followed the instructions in other threads and my card does not work. I am getting this message.
"$ dmesg | grep -e rt5 -e wlan
[ 14.454006] rt5390sta: module license 'unspecified' taints kernel. I have also installed the Ralink RutilT program using synaptic. I can see my wireless device and many others around me but I can't connect.
View 9 Replies
View Related
Dec 29, 2010
What is the best method for debugging the booting process? Is there a cheatcode (tried debug and failsafe). Slackware 13.1 with standard linux kernel 2.6.35.8. I having a problem with a dell server 2860 booting my build. It is hanging on
[Code]....
Booting my previous kernel 2.6.27.27(different disk with different initrd.gz) it loads the same as above but continues with
Code: loading iSCSI transport class v2.0-870 iscsi registered transport tcp I'm stumped it the problem is with the ata_piix module or the iSCSI transport module or some firmware I might be missing. I booted other pcs without issue.
View 3 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Jul 22, 2010
I have an Acer Aspire One ZG5, which is running (Desktop Version) 10.04. I've been happily using the built in wifi adapter, but now I've got a new wireless hub that supports 802.11n and I want to exploit the higher connection speed. I've bought a wireless usb that has no external markings, however, using 'lsusb' I've managed to establish it contains ralink 3070. Any ideas how I get this to work? When I plug in the wireless dongle from another laptop I get two connections available for use in network manager, but when I plug this one in nothing seems to happen.
[Code]...
View 3 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Mar 10, 2011
I just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
View 4 Replies
View Related
Mar 31, 2011
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
View 9 Replies
View Related
Jul 30, 2011
I've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.
View 5 Replies
View Related
Aug 5, 2011
I'm running 11.04. I have brought a new WiFi adapter, ralink rt2070. When I browse the internet, it takes a long time to load a webpage. When I download updates, it goes at 3,060 BYTES a second. Is there any solution? I'm using the default rt2800usb driver.
View 9 Replies
View Related
Jun 25, 2011
Well, I reinstalled after this update fiasco we just had and now I am having issues with my driver resetting. I open terminal and type in:
Quote:
sudo rmmod rt2800usb
Finishes properly. I then pull my USB device, plug it back in, new driver kicks in. Wireless then works fine. However, upon reboot, it's back to using the rt2800usb driver, which doesn't work. So I head back to terminal and repeat the step above and all's well after.
I am fairly new to Fedora, so how can I actually get Fedora to completely blacklist the rt2800usb driver?
View 4 Replies
View Related
Apr 23, 2010
I was having trouble installing rt73sta, then i came across a thread that showed me how to blacklist the rt drivers, then i realised the ubuntu live cd came with the rt drivers already , but after a while the drivers disappeard i un-blacklisted the others and ive even tried a fresh install of the cd but i get nothing under lsmod|grep rt, i don know were theyve goneWould they be there if i done a fresh download and burn of the cd? Or is it something to do with my computer? it seems funny theyve just gone and not on a fresh install even after formatting hard drive and deleting and re-sizing the partitions
View 2 Replies
View Related
May 10, 2009
I'm here because maybe this is a rare situation: I'm trying to mount a home server using a wireless card.
This is the output of my /sbin/lsusb code...
I'm trying to connect with this card but I don't know how.
View 19 Replies
View Related
May 8, 2010
After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.
After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?
View 9 Replies
View Related
