Fedora Networking :: BT Home Hub - FC13 No Connection

Nov 17, 2010

Just changed ISP, BT home hub 2.0 installed this morning.

From this Windows PC, wifi and wired connections OK.

From FC13, wired, I've set up DHCP and ifconfig shows the IP as in range (192.168.1.64)

Ping fails when I try to ping the router? No access from FF either.

I'm stuck thinking of what could be blocking it?

Firewall has http https as trusted services.

Not sure about trusted interfaces and masquerading? Should my eth0 be enabled for either of these?

View 2 Replies


ADVERTISEMENT

Fedora :: Error: Package Openldap-2.4.21-6.fc13.x86_64 (which Is Newer Than Openldap-2.4.21-4.fc13.i686

Jun 8, 2010

Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed

View 4 Replies View Related

Fedora Networking :: No SAMBA With FC13?

Jun 6, 2010

I just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network

View 6 Replies View Related

Fedora Networking :: Cisco Vpn Disconnected Frequently On FC13?

Jun 30, 2010

cisco vpn client 4.8.5 I have no problem to connect it, but got disconnected every minute after I opened a terminal and ssh to company's server. Not sure what's causing the problem. There's no problem to connect to windows.

View 2 Replies View Related

Fedora Networking :: Getting A Gobi Un2420 Internal 3g Modem Working In FC13?

Jun 25, 2010

getting a gobi un2420 internal 3g modem working in FC13?

View 8 Replies View Related

Ubuntu Networking :: 9.10 - No Connection To Home Network

Jan 31, 2010

I am new to Ubuntu, and I have just installed version 9.10 on my desktop PC. I need to connect my computer to my home network. Right now, I have no connection and cannot detect any of the hardware when running Ubuntu. When I switch over to my Windows XP partition, everything works fine.

View 8 Replies View Related

Ubuntu Networking :: How Can I Share Ipv6 Connection To Home Network

Jul 25, 2010

I'm using Internet connection through local network, receiving white (global) IP, route, DNS with local DHCP server. Lately I noticed that my Ubuntu gets ipv6 autoconfiguration from ISP router, receiving global ipv6 address and automatically adding ipv6 route. I can access Internet resources using ipv6 connection:
I can ping inet resources using my ipv6 global address and access, for example, ipv6.google.com or URL..

How can I share ipv6 connection to my home network? Using ipv4 it's easy, I just can use NAT for this. But if I understand correctly, in ipv6 there isn't such thing as NAT, because there is no limit in ip addresses.

View 2 Replies View Related

Ubuntu Networking :: Run Two Home Wireless Systems From One Internet Connection?

Aug 22, 2011

I have a netgear wireless system and it is problematic with Linux. I need to use a static IP or will loose connection. It is also problematic with an itouch and a kindle. I just bought my wife a kindle and need to get it to work. It there a way to run two home wireless systems from one Internet connection? I have a wireless router supplied by surewest but my wireless Cannon printer did not seem to like that.

View 1 Replies View Related

Fedora Networking :: Mobile Broadband FC13 Huawei E173 - Cannot Switch Device To Modem Instead Of Storage With Usb_modswitch

Nov 27, 2010

I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:

[Code].....

View 5 Replies View Related

Fedora :: Upgrade Of Java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 And Java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 Prevent The Loading Of Ameritrades Command?

Oct 21, 2010

Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.

View 3 Replies View Related

Ubuntu Networking :: Mount An HP Laser Printer On Home Network Through A VPN IPSES Connection From Laptop?

Dec 12, 2010

I have tried to mount an HP laser printer on my home network through a VPN IPSES connection from my laptop, but I cannot manage to see the printer or make it accept commands.

View 1 Replies View Related

Fedora Networking :: 11 - Share My Internet Connection With Wireless Connection

Jun 21, 2009

I have installed Fedora 11 recently. I want to share my Internet connection.

I have e LAN connection eth0 which is connected to internet.

I have a Wireless connection wlan0.

I want to share my internet connection with wireless connection.

View 3 Replies View Related

Fedora Installation :: Software Update - Fedora (2.6.34.6-47.fc13.x86_64) - Nvidia Driver Doesn't Work

Sep 1, 2010

Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:

Code:

Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored

[code]....

I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?

Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?

View 5 Replies View Related

Fedora :: Migration From Fc12 To Fc13?

Aug 10, 2010

Can I migrate from fc12 to fc13 or do I have to do a full re-install? If I can migrate, can you point me to the instructions/working paper/etc.?

View 6 Replies View Related

Fedora :: Cannot Boot After FC13 Update

Sep 30, 2010

I have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.

View 5 Replies View Related

Fedora :: Setup VNC Server On FC13 Box?

Mar 10, 2011

I am trying to setup VNC server on FC13 box. i am not able to do proper configuration. Can anone point to me a good link which is working. I did many configurations. but no success yet. I have an issue especially with xstartup script. I am running VNC server on Linux and RealVNC viewer on Win Vista OS.When i try to connect to VNC server from RealVNC viewer from Win Vista. It gives error like "unable to connect to host: Connection timed out (10060)"

View 4 Replies View Related

Fedora :: Upgrading FC12 To FC13 Using Yum

Mar 21, 2011

Following this from the wiki: It states Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update. How do you ensure that its the last package to update?

First install the new fedora 13 gpg key. You may wish to verify this package against [URL] and the fedora ssl certificate.
rpm --import [URL]
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=13 distro-sync

- Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV.
- Intel video no longer works without Kernel Mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- nVidia video no longer works without kernel mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.

View 5 Replies View Related

Fedora :: FC13 - Possible To Uninstall KDE And Just Keep Gnome

May 5, 2011

I have FC 13 with both KDE and Gnome loaded. Over the last couple of years of using linux. I've found Gnome better suitable for my needs than KDE and now I'm stuck!

View 6 Replies View Related

Red Hat / Fedora :: FC13 Hangs On Starting Atd?

Nov 4, 2010

I did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:

Code: default=0
timeout=0
splashimage=(hd0,0)/grub/splash.xpm.gz

[code]....

View 2 Replies View Related

Red Hat / Fedora :: Can't Run Terminal After FC13 -> 14 Upgrade

Sep 22, 2010

got my upgraded fedora 14 partition to boot, but I find out that I had to reinstall my nvidia driver, no big deal. seemed to go ok, but now when I go applications->system tools -> terminal I get the "starting terminal" thing on the bar, and then nothing. Can't figure out whats up.

View 4 Replies View Related

Fedora :: Jabber Broken In Kopete In FC13?

May 26, 2010

I have just updated to FC 13 (64 bit), and there seems to be a problem with Jabber in Kopete. I use this to connect to the google talk servers. In FC 12 this was not a problem. However, now I recieve a message "Cannot load the Jabber protocol plugin." when trying to add a Jabber account in kopete. This happens on two separate recently upgraded machines.

I suspect the kdenetwork package shipped with FC 13 is broken in this respect.

EDIT: Updating to the kde packages from the kde-testing repository fixes this, so it looks like the package is indeed broken.

View 2 Replies View Related

Fedora Hardware :: FC13 Gallium 3D Not Working ?

May 28, 2010

I have a fresh install of FC13, nVidia 9800 GTX+ video card but no 3D.

View 4 Replies View Related

Fedora Installation :: Can't Install FC13 Using A USB Drive

May 31, 2010

I have a mivvy l310 netbook. Before I had FC12 on it and I couldn't upgrade (not enough space on /boot, tried all commands and it didn't worked) to FC13. So I said I would do a fresh install for FC13. I used live CD FC 13 iso to make the usb drive (16gb) bootable.It boots, all goes ok, untill the installation is in progress of copying files to my HDD (at this point my HDD is empty, since it was formated). At about half of the progress bar of copying the installation files to HDD it stops with: ""There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media."" I can't go further and install it. I tried making the usb drive on FC13 (finished successfully, on another laptop with liveusb creator) and also on SUSE and it behaves the same.

I also tried second method (described in a thread around here, it worked for me in the past for FC11), by just making the usb drive bootable, using commands in the terminal (here my FC13 kernel, on another laptop crashes, for some commands) and when I try to install I get only: "missing operating system, sleeping forever". For this method, it does not boot at all, so I guess the usb drive is not properly setup. I don't know what else to try. I tried normal dvd iso, live cd, tried making the usb using commands, using live cd, with commands on suse, on FC13 etc...

LE: I found in messages log that I have: zlib_inflate error fc13

LE LE: what's more weird is that I downloaded the same live image of FC13 and burned it on a CD and managed to install it on my other laptop and it worked.

Later update: I tried now with the DVD iso for FC13 and now I get: operating system not found

View 10 Replies View Related

Fedora :: Glx Too Slow In FC13 Even Having A Nvidia Card?

Jun 9, 2010

I have a GeForce 7100 GS Nvidia card (that is, a 2 year old card: not old, not new), that I always used with the kmod-nvidia kernel modules without a problem.But FC13 installs nouveau, drivers for nvidia cards. I tried those, and glx is too slow. Foobilliard and gl-117 games are VERY slow, glxgears shows 400 fps. Is there a xorg.conf trick?

View 3 Replies View Related

Fedora Installation :: Pidgin Works On Fc4 But Not Fc13

Jun 30, 2010

I installed pidgin 2.6.6 on fedora 13 and setup as following:

protocol: yahoo
pager server : scsa.msg.yahoo.com
port: 5050
file transfer server: filetransfer.msg.yahoo.com
file transfer port: 80

[Code].....

View 3 Replies View Related

Fedora :: FC13 Banshee Wont Play CDs?

Jul 2, 2010

Post upgrade from 12-13 my Banshee installation is refusing to play CDs. In fact it doesn't even recognise there is one in the drive.

The icon appears on the desktop ok when I put on in and I get asked what I want to use to open it so it seems the system itself recognises a CD but for some reason Banshee doesn't.

I got an error about Banshee needing CD Audio Plugin, which I told Banshee to try and find but it failed. No idea where to go from here.

Worked it back to gstreamer-plugins-bad / ugly packages were wanted. So removed with yum then allowed banshee to try finding them.

It got as far as asking for root auth which I gave it, it them fell over in a heap.

Now it seems banhsee is no longer on my system and has some dependency issues....

[root@bigfoot log]# yum install banshee
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check

[Code]....

View 6 Replies View Related

Fedora Hardware :: Workstation (FC13) Keeps Freezing

Aug 15, 2010

I am using FC13 (2.6.33.6-147.2.4.fc13.x86_64) with a ASUS MB/Athlon II X4 CPU for the hardware.Recently my workstation keeps freezing, the power is still on, but the screen goes black,I cannot ping it from other computers on the network, the only thing to do is to press the power switch.

Questions:
* I cannot find any messages in the log, no kernel panic message on the screen, I even installed kdump but no kernel dump is created,does it means it can only be a hardware problem ? I have a vendor kernel module for my NIC and my video card could they cause that kind of problem ?
* I am logging the CPU temp every minutes and I notice that on a few occasion the CPU is close to 70C when the workstation freeze,is 70C too hot for the CPU, is that what CPU do when they reach a temp to high for them to operates ?

View 4 Replies View Related

Fedora Installation :: Can't Upgrade Firefox 3.6.7 To 3.6.8 In FC13

Aug 16, 2010

I just installed FC13 on my laptop. I cannot upgrade from FF 3.6.7 to 3.6.8.

View 3 Replies View Related

Fedora :: Desktop Freezing After Upgrade To FC13?

Sep 2, 2010

I upgraded from FC11 to FC13 last night. The desktop has not been stable since. It will run for anything from 5 to 30 minutes before it locks up. Interesting, if I am already ssh'd in, I can perform commands, but a new SSH will hang, and if I try to SU to root in an already logged in ssh, it hangs.

However, I did finally manage to get the messages that were logged to /var/log/messages at the time of the desktop freeze.

Here are the messages. The first 3 about high speed usb may or may not be relevant. The freeze appeared to happen around the 4th message in the log below.

Code:
Sep 2 13:16:57 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:26:38 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:31:20 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:38:03 starbug kernel: INFO: task jbd2/dm-0-8:558 blocked for more than 120 seconds.

[Code].....

View 1 Replies View Related

Fedora :: No Login Box After Update To 2.6.34.6-47.fc13.x86_64 And Above?

Sep 20, 2010

Recently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved