Ubuntu Networking :: 64 Bit Bcm4311 Wireless Random Kernel Panics?
Sep 22, 2010
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
I'm running CentOS 5.3 x86_64 on my laptop (dell vostro 1400, core2duo, 3GB RAM, intel 3945ABG wireless, nvidia video and LAN). The problem is that some times (like 15-20% of times) I shutdown the laptop, I get a kernel panic related always to the wireless kernel module (I haven't been able to get screenshot or anything). I'm using the latest centosplus kernel. I never get these panics with the standard CentOS kernel, however the standard kernel doesn't light the wireless led, and that annoys me a lot. Therefore I'm forced to use centosplus kernel. The question is not how to solve this (i know I've not given enough details) but what to do to diagnose better the cause of the panic and then correct it.
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I'm happily using OpenSuse 11.2/KDE on my laptop equipped with a Broadcom BCM4311 WLAN chip, but today, after a restart, WLAN ceased to work. I mean that Network Connection doesn't show anymore available WLANs. Two things that seem strange to me are that the
I just built a computer with these specs: Asus P7P55D-E Pro Mother Board 2 x 4gb GSkill RipJaw 1333 Intel Core i5-760 cpu MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
I have been a happy Ubuntu and other distros user from 2007 to now. Had my old 7.10 Gutsy Gibbon (Ubuntu Studio actually) that I really felt was time to upgrade. Then I downloaded the ISO image for 11.04 Natty Narwhal past 4 day ago. It gave me an option to install on my old 7.10, upgrading it, then I chose that one not to have to lose my data.
At the very end of the installation (when downloading several packages from the net) I got a kernel panic. After that I reinstalled from zero wiping the whole partition, with the same results. It only worked when I disconnected the net cable so it wouldn't download anything during install. Then I could run the 11.04, but kept getting kernel panics, and after some testings (I thought it was the nvidia video drivers at first) I think it happens after some ammount of network traffic happens.
Memtest went normal, I tried logging with no-effects and I tried some solutions from forums with no results. The pc can be on and working for hours, but after I start surfing the web for some time, I get a freeze. Sometimes Caps Lock and Scroll Lock leds are flashing, and sometimes just freezes to simply become unresponsive. When it was during the installation I got a message saying it would pop out into console because panic occured and then froze. Anyway I always have to press the reset button.
I would like to be sure if I have some of my hardware broken or if the newest kernel is still green on some hardware support; maybe network. I'd also like to know if I can install older versions of the kernel; I think that should fix the problem because other distros worked perfectly here before. I also heard about some kernel-image-pae being different from the ordinary kernel image. Could it help if I change that package? I'm waiting to install 11.04 in my wife's computer also but of course I don't want to bring any problems on her! My net card is Nvidia Nforce and my processor is AMD Athlon II X2 with a GForce 9400 for video card.
My friend's PC recently started acting up. He had me install Sabayon on it and everything was fine until a few days ago. Every app I try to run after the PC boots results in a segmentation fault. I figured maybe something was wrong with the HDD, so I tried to boot from a DSL liveCD to run fsck, but it wouldn't boot; it freezes right away. I then tried the Sabayon LiveDVD and got a kernel panic.Does anyone have any idea what the problem could be? I am completely clueless; I've never had anything like this happen before.
After building a new system I have been getting kernel panics randomly. I have been able to look at /var/log/messages and determine that either my RAID card, XFS, or something along those lines is causing the problem. It has now gotten bad enough that any heavy use of the RAID will cause it to panic and die.
There is one large file on this that I need which is not on my backups but when I try to get it off, the transfer will cause a kernel panic within minutes. What is causing the panic? Is there any way to resolve it? The RAID card is an LSI SAS3081E-R and I am using the built in drivers/modules within Ubuntu 10.04 x64 (pretty sure the kernel itself has the driver included). There is source available for the driver from LSI's site but I'm not sure if that will solve the problem and in addition to that, I can't figure out how to compile and install it. It has a Makefile already but make just complains "no targets".
Code: Jun 21 13:00:22 cyan kernel: [ 706.206498] ffff88019652daf8 ffff88018ff61698 ffff8801935ddd50 ffffea00038f6650 Jun 21 13:00:22 cyan kernel: [ 706.206472] Process xfsdatad/2 (pid: 862, threadinfo ffff8801935dc000, task ffff88019652dac0)
I'm trying to use and old Dell Dimension 2350 workstation with 1GB of RAM and a 200GB drive as a home server. I boot the CentOS 5.3 install DVD, get to the splash screen and hit ENTER to start the install. The install routine starts and then kernel panics with a very long trace I can't make sense of. I've used the DVD for other installs so I know the media is good.Are there any known quirks to installing linux on a Dimension 2350? Maybe some kernel line parameters like no acpi?? As a test, I took an Ubuntu server cd, and the install actually completed but on reboot it kernel panicked with a similar long trace error. Obviously this is most likely a hardware issue.
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code: NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR; Host address width 36 DMAR: DRHD base: 0x0000000000000000 flags: 0x1 IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53 DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe DMAR: No ATSR found DRHD: handling fault status reg f0002198 Kernel panic - not syncing: DMAR hardware is malfunctioning
Since the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
A while ago, when I was using Maverick, Firefox started to crash randomly and led to kernel panics.
So I upgraded to Natty (clean install) and Firefox there too crashed.
Then I was getting graphics and make problems.
Today I tried to install Fedora 15. It first boots to a Live desktop that warned me that my hard drive had 65000+ bad sectors. Sixty-five thousand.
So I got a new one. A WD Scorpio Black, 750GB 7200RPM with Advanced Format.
Again I boot into Fedora 15. OK, no bad sectors. I tried to run Disk Utility Self Tests but it constantly crashed. Fedora warns you about this.
In the Live session, I opened Firefox. It also crashed just like back in Ubuntu. Then the screen flashes black and got warnings after warnings that a kernel module has crashed.
So I took out my old Maverick installation CD and first tried a Live session. However, Disk Utility told me that SMART is not supported while on Fedora, it was.
So I tried to install. But soon after that, I got a warning that the installer has crashed because a file copied to the disk did not match the file on CD. Right now I am in the Maverick Live session.
F12 Clean Install stopped with line: [<c04041a7>] kernel_ thread_helper+0x7/0x10 The machine has completed more than 30 hours of HD cleaning with DBAN (overwrites the HD). It used to be able to run F9 or Ubuntu 8.04 but always returned kernel panic during other distro installation attempts. Why after a complete HD clean though?
Recently switched my home server from Gentoo to CentOS and have been getting kernel panics consistently since I made the server "live". The machine was built with all new hardware. I'll post relevant configuration info and picture of the kernel panic below. So far all kernel panics have been with kernel "2.6.18-164.9.1.el5.centos.plus", right now I am testing with the kernel listed below to see if it does the same thing (2.6.18-164.9.1.el5).
I have a Hewlett-Packard HP Pavilion dv6000. I had no issues before the upgrade, but after, my wireless driver refuses to turn on the wireless at all. I've seen in most of the posts, people can see the wireless networks but not access them. I can't even get my little orange wireless (off) light to turn blue (on). The "additional drivers" option in "administration" was a bust and I've tried reinstalling the kernel from my original disk iso.
Here is my wireless info: Code: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
I currently have the STA broadcom driver enabled and all I can do is use a cable for internet right now.
I have loaded openSuSE 11.4 on an IBM x3400 box with an Adaptec ServeRAID 8k-l SAS harddisk adapter. openSuSE 11.1 was previously loaded on this box and was using XEN kernels.) The default "desktop" kernel boots and operates correctly. I use this machine to run other XEN virtual machines to run different versions or our companies printer controller application. When I attempt to boot the xen kernel, the kernel cannot locate the root partition (or any other partition) on the hard disk. Here are a few lines of kernel output:
Yet another Linux newbie with wireless problems I'm afraid. I saw some postings that appear very similar but I don't have any Linux experience and don'h to make uncontrolled changes to the environment without expert advice.Background: I have an old laptop (HP Pavilion dv9000) with Vista installed and a troubled history (overheating motherboard failure), so I put it on the shelf and replaced it with a new Windows 7 laptop (Dell Studio 1555). But I have been intrigued by the Ubuntu reviews and thought I would dig out the old laptop and install Kubuntu 11.04 (replacing the 2 Vista partitions with a single Kubuntu partition).
Kubuntu installation was easy and I am impressed by the Kubuntu interface, but I soon noticed that it was not detecting my wireless router, which works fine for everything else (Dell, Sony Bravia TV and also an internet radio). The wired connection is okay (using it now) so I guessed the problem was Kubuntu notognising the Broadcom BCM4311.The network interface tool shows the wired connection but the Wireless tab is greyed out.I also installed Wicd Network Manager but that just confirmed what I knew.I noticed other threads have asked for the lspci and lsusb details so here they are:
I use ubuntu 10.10 and disconnects from wireless at random. after it reconnects the the connection speed is very slow and unstable. It's not my router because it works fine on my sister's netbook (which is also running ubuntu) and it worked fine when I was running windows? I'm not very advanced with linux so you know. I don't have IPv6 enabled. My laptop is an "Advent QRC430" my wireless card is QCOM Q802XKG Wireless Network Card.
I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)
I was told by an experienced Linux user/IT professional that older Broadcom wireless cards had embedded code preventing access through non-Windows OS's. I was told that there were drivers that were basically "hacks" for skirting this issue. I've tried two different drivers and neither seems to be doing the trick. My current driver is the "Broadcom STA wireless driver".
Symptoms
Recognizes my network and others Says it's connected Won't load any web pages Frequently asks for authentication I've authenticated using my network password and my router's security key
Here's what the terminal says about my wireless card:
Everyone who is experiencing this issue please click the link saying it effects you and add a comment so the bug will get the attention it needs. It seams like many people are facing this issue. [URL]
I am using Fedora 12. I am able to connect to my wireless network (95% of the time at least) on start-up automatically, however after anywhere between a few seconds to a few minutes later it cuts out and will not reconnect. It appears to be that whenever it finds next doors network it disconnects from mine! I have set the channel to 9, and my neighbor's is on 1. I have a USB N+ adapter, and a G+ MIMO PCI card, however do not know which is being used to connect with.
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behavior when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information. uname -r
So... as I tried to connect to the internet i saw a load of garbled characters as names of wireless areas. I took pics w/ a camera (because I suck and don't know how to take screenshots) and I'll try to get them up. Its all nonsensical and is really making me concerned about the state of my computer. [URL] That link contains pics of my issue.
I have my laptop dual booted between Ubuntu 9.10 and Windows 7. In Ubuntu I randomly lose connection to the wireless network. It always works fine when I first boot into Ubuntu but after a while my wireless connection will go down. The signal strength meter will go to zero bars and the black popup message will appear that my wireless connection has disconnected. At first, if I just wait a bit, the connection will come back. However, after about 4 or 5 times of doing this it will then ask me for my password, and inputting the password does not reconnect me to the AP. I am finally forced to reboot. Then it works OK for a while again and the cycle repeats.
It works fine in Windows7 all day, every day. I have the Release Candidate of Windows7 so it's going to expire soon. I would really prefer to make Ubuntu my everyday OS on this laptop rather than pay for a Windows7 license but I cannot tolerate a flaky wireless connection.
I had 8.1 on this laptop at one point and I never had any problems with the wireless then, that I can remember. I had no Ubuntu for a while but then I came back with the 9.1 and was loving it until the wireless problem reared it's ugly head.
Wireless found by lspci: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Has anyone experienced random wireless dropouts? Like one minute, you are connected and then not, with no obvious reason as to why it happened, just network manager popping up requesting a password to reconnect.
After reading and trying tons of tutorials and several OS reinstalls, I'm stuck trying to load wireless on my Dell Vostro 1400 laptop. Before you say search forums! I hurry to tell I did. No solution seems to work. WLAN chipset - Broadcom's BCM4311 / BCM 2050. 1st scenario - native CentOS 5.3 drivers Although CentOS recognize WLAN card and displays it's name correctly, neither network or NetworkManager sees any of wireless networks.
2nd scenario - Broadcom's drivers Most know Broadcom has released Linux drivers. I had some more luck with them than in 1st scenario although problems occur. After successfully compiling Kernel module, wireless networks are discovered and can be successfully connected but no pages load. It seems like DNS is not resolving at all and page loading timeouts instantly. Tested on TKIP-encrypted network.
I'm having a strange problem with my wireless card (I never had troubles with it so I'd be glad if you could help me in making it work again). I have installed the restricted STA driver for my Broadcom BCM4311 wireless card, and apparently the card is recognized, and in fact I can "see" the available wireless networks and connect to my one.
The strange things is that even if I connect to my network I can't navigate. If I link an ethernet cable, start navigating and after disconnect the ethernet and keep using only the wireless, I can navigate without problems.
