F12 Clean Install stopped with line:
[<c04041a7>] kernel_ thread_helper+0x7/0x10
The machine has completed more than 30 hours of HD cleaning with DBAN (overwrites the HD). It used to be able to run F9 or Ubuntu 8.04 but always returned kernel panic during other distro installation attempts. Why after a complete HD clean though?
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code:
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR; Host address width 36
DMAR: DRHD base: 0x0000000000000000 flags: 0x1
IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53
DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe
DMAR: No ATSR found
DRHD: handling fault status reg f0002198
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 1, comm: swapper Tainted: G W 2.6.31.5-127.fc12.i686 #1
Call Trace:
[<c0764636>] ? printk_0x14/0x16
[<c0764580>] panic+ox3e/0xe0
[<c05b4ce3>] __dmar_enable_qi+0xbc/0xd3
[<c05b52d1>] dmar_enable_qi+0xe9/0xf3
[<c09aaecc>] init_dmars+0x1c7/0x5fb
[<c08fb6b4>] ? pci_iommu_init+0x0/0x11
[<c09ab50e>] intel_iommu_init+0x20e/0x2b6
[<c098f6bc>] pci_iommu_init+0x8/0x11
[<c0401143>] do_one_initcall+0x51/0x13f
[<c0989372>] kernel_init+0x19c/0x1ed
[<c09891d6>] ? kernel_init+0x0/0x1ed
[<c04041a7>] kernel_thread_helper+0x7/0x10
I'm trying to use and old Dell Dimension 2350 workstation with 1GB of RAM and a 200GB drive as a home server. I boot the CentOS 5.3 install DVD, get to the splash screen and hit ENTER to start the install. The install routine starts and then kernel panics with a very long trace I can't make sense of. I've used the DVD for other installs so I know the media is good.Are there any known quirks to installing linux on a Dimension 2350? Maybe some kernel line parameters like no acpi?? As a test, I took an Ubuntu server cd, and the install actually completed but on reboot it kernel panicked with a similar long trace error. Obviously this is most likely a hardware issue.
View 4 Replies View RelatedSince the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies View RelatedRecently switched my home server from Gentoo to CentOS and have been getting kernel panics consistently since I made the server "live". The machine was built with all new hardware. I'll post relevant configuration info and picture of the kernel panic below. So far all kernel panics have been with kernel "2.6.18-164.9.1.el5.centos.plus", right now I am testing with the kernel listed below to see if it does the same thing (2.6.18-164.9.1.el5).
justin@empire justin $ uname -rmi
2.6.18-164.9.1.el5 x86_64 x86_64
justin@empire justin $ rpm -qa |grep kernel |sort
kernel-2.6.18-164.6.1.el5
kernel-2.6.18-164.6.1.el5.centos.plus
kernel-2.6.18-164.9.1.el5
[Code]...
I have loaded openSuSE 11.4 on an IBM x3400 box with an Adaptec ServeRAID 8k-l SAS harddisk adapter. openSuSE 11.1 was previously loaded on this box and was using XEN kernels.) The default "desktop" kernel boots and operates correctly. I use this machine to run other XEN virtual machines to run different versions or our companies printer controller application. When I attempt to boot the xen kernel, the kernel cannot locate the root partition (or any other partition) on the hard disk. Here are a few lines of kernel output:
[code].....
A while ago, when I was using Maverick, Firefox started to crash randomly and led to kernel panics.
So I upgraded to Natty (clean install) and Firefox there too crashed.
Then I was getting graphics and make problems.
Today I tried to install Fedora 15. It first boots to a Live desktop that warned me that my hard drive had 65000+ bad sectors. Sixty-five thousand.
So I got a new one. A WD Scorpio Black, 750GB 7200RPM with Advanced Format.
Again I boot into Fedora 15. OK, no bad sectors. I tried to run Disk Utility Self Tests but it constantly crashed. Fedora warns you about this.
In the Live session, I opened Firefox. It also crashed just like back in Ubuntu. Then the screen flashes black and got warnings after warnings that a kernel module has crashed.
So I took out my old Maverick installation CD and first tried a Live session. However, Disk Utility told me that SMART is not supported while on Fedora, it was.
So I tried to install. But soon after that, I got a warning that the installer has crashed because a file copied to the disk did not match the file on CD. Right now I am in the Maverick Live session.
The Fedora Core 8 which has been preloaded is certainly not up to scratch as all I want the laptop for is to play MP4 and AVI files. I have looked over all the threads on how to load fedora 11 (recommended version), and have gone to the Fedora site to download the files (32-bit was also recommended - running a i686 Intel Atom).
1. My issue is do I download the files onto CD/DVD, then copy those straight onto a USB and boot from there, or can I find another way to get it directly onto a USB stick without having to waste a CD/DVD?
2. There is also mention of a clean install and partitions across quite a few threads but I can't see how to do these and in what order, and are they necessary?
p.s there is no CD/DVD player on this machine so it can only be loaded from USB.
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
I have been a happy Ubuntu and other distros user from 2007 to now. Had my old 7.10 Gutsy Gibbon (Ubuntu Studio actually) that I really felt was time to upgrade. Then I downloaded the ISO image for 11.04 Natty Narwhal past 4 day ago. It gave me an option to install on my old 7.10, upgrading it, then I chose that one not to have to lose my data.
At the very end of the installation (when downloading several packages from the net) I got a kernel panic.
After that I reinstalled from zero wiping the whole partition, with the same results. It only worked when I disconnected the net cable so it wouldn't download anything during install. Then I could run the 11.04, but kept getting kernel panics, and after some testings (I thought it was the nvidia video drivers at first) I think it happens after some ammount of network traffic happens.
Memtest went normal, I tried logging with no-effects and I tried some solutions from forums with no results. The pc can be on and working for hours, but after I start surfing the web for some time, I get a freeze. Sometimes Caps Lock and Scroll Lock leds are flashing, and sometimes just freezes to simply become unresponsive. When it was during the installation I got a message saying it would pop out into console because panic occured and then froze. Anyway I always have to press the reset button.
I would like to be sure if I have some of my hardware broken or if the newest kernel is still green on some hardware support; maybe network. I'd also like to know if I can install older versions of the kernel; I think that should fix the problem because other distros worked perfectly here before. I also heard about some kernel-image-pae being different from the ordinary kernel image. Could it help if I change that package? I'm waiting to install 11.04 in my wife's computer also but of course I don't want to bring any problems on her! My net card is Nvidia Nforce and my processor is AMD Athlon II X2 with a GForce 9400 for video card.
My friend's PC recently started acting up. He had me install Sabayon on it and everything was fine until a few days ago. Every app I try to run after the PC boots results in a segmentation fault. I figured maybe something was wrong with the HDD, so I tried to boot from a DSL liveCD to run fsck, but it wouldn't boot; it freezes right away. I then tried the Sabayon LiveDVD and got a kernel panic.Does anyone have any idea what the problem could be? I am completely clueless; I've never had anything like this happen before.
View 3 Replies View RelatedAfter building a new system I have been getting kernel panics randomly. I have been able to look at /var/log/messages and determine that either my RAID card, XFS, or something along those lines is causing the problem. It has now gotten bad enough that any heavy use of the RAID will cause it to panic and die.
There is one large file on this that I need which is not on my backups but when I try to get it off, the transfer will cause a kernel panic within minutes. What is causing the panic? Is there any way to resolve it? The RAID card is an LSI SAS3081E-R and I am using the built in drivers/modules within Ubuntu 10.04 x64 (pretty sure the kernel itself has the driver included). There is source available for the driver from LSI's site but I'm not sure if that will solve the problem and in addition to that, I can't figure out how to compile and install it. It has a Makefile already but make just complains "no targets".
Code:
Jun 21 13:00:22 cyan kernel: [ 706.206498] ffff88019652daf8 ffff88018ff61698 ffff8801935ddd50 ffffea00038f6650
Jun 21 13:00:22 cyan kernel: [ 706.206472] Process xfsdatad/2 (pid: 862, threadinfo ffff8801935dc000, task ffff88019652dac0)
[Code]...
I'm running CentOS 5.3 x86_64 on my laptop (dell vostro 1400, core2duo, 3GB RAM, intel 3945ABG wireless, nvidia video and LAN). The problem is that some times (like 15-20% of times) I shutdown the laptop, I get a kernel panic related always to the wireless kernel module (I haven't been able to get screenshot or anything). I'm using the latest centosplus kernel. I never get these panics with the standard CentOS kernel, however the standard kernel doesn't light the wireless led, and that annoys me a lot. Therefore I'm forced to use centosplus kernel. The question is not how to solve this (i know I've not given enough details) but what to do to diagnose better the cause of the panic and then correct it.
View 3 Replies View RelatedSo, I currently have Ubuntu on my laptop and would like to install F12 instead.I burned a copy of the F12 .iso and set my BIOS to boot from CDROM drive, but Ubuntu continues to load and I can't seem to get the OS to load for a clean install (from the .iso, even after extraction).Unfortunatly, the BIOS will not let me boot from USB otherwise I would try that.Any ideas on what might get this off the ground?
View 8 Replies View RelatedFor the last two releases I've used pre-upgrade ( F11>F12>F13 ). While F13 is working OK it's showing one or two minor glitches, such as the odd hang and sometimes part of the Gnome taskbar doesn't load. I realise these may be just F13 issues, but in case they're due to accumulated errors in two updates I'm planning to back up and do a clean install of F14 - once the feeding frenzy has died down.
The question, as posed in the title, is whether to D/L the full DVD or install from a live CD and add the apps I need. For instance, I don't need to network with my other computers - data transfer is by ' sneakernet ' with a pen drive - and I'm sure there's quite a bit else I can live without which the standard DVD install will contain, such as chat. Conversely, I'll be installing some extras such as Google Earth using AutoX.So basically, will installing from a live CD be any real benefit or will I just be making work fro myself? I frequently notice updates which don't seem to have much to do with the apps I use regularly, but they may contain essential dependencies.
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
Here is the details of my system:
Dell inspiron 1520
lspci (snipped)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
[code]....
Server is 10.04 server edition
[code]...
soon kernel panics. What else to fix here?
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
View 6 Replies View RelatedI configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies View RelatedWhen trying to install RHEL 5.4 on a Flagstone SATA (encrypted hard disk), linux timeouts while loading the ata_piix module.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd 81/00:08:00:00:00/00:00:00:00:00/e0 tag 0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
The above message is repeated several times until the kernel eventually "panics".If I use a non-encrypted SATA (Maxtor, Fujitsu, etc), the install works. It only fails with Flagstone SATA encrypted hard disks.
My update to kernel version 2.6.33.5-124 last night killed my Dell wireless, which uses broadcom-wl 5.60.48.36-1. What happened and how do I fix it?
View 14 Replies View RelatedI have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
View 2 Replies View RelatedMy graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
The latest installed kernel stopped working. ( 2.6.35.13-92.fc14.i686) It won't boot. I just get black screen with blinking cursor in top left corner. How do I, or can I, remove and reinstall?
View 4 Replies View RelatedI have a PC with a 120GB HDD which is clean and formatted.I have commenced install of 10.10 from CD. It starts fine and I run through to the who are you window. I have filled in all the details but the "FORWARD" button is grayed out. Also, the progress bar eventually stops altogether. Is the system hanging, or is the install just slow?
View 5 Replies View RelatedSo I've been trying to install 11.04 x64 on the same drive as Windows 7. The install seemed to go fine until it tried to install grub over the Windows 7 bootloader. My first try at this, I just told it to try again, and it seemed to install fine. It then rebooted and came up with the grub bootloader as expected. However, when it attempted to boot into 11.04, it gives me an error that says "unknown filesystem". It does however boot into Windows 7 fine. While I was writing this up, I went into my BIOS to make sure that my SSD was set to be the primary boot drive and it was not. Changed the SSD to primary boot priority and away it went.
For some reason, with the my other hard drive as the primary boot drive, it wouldn't boot to Ubuntu, but would behave just fine when going into Windows. Very strange behavior. I rebooted the computer again to make sure that the boot priorities fixed the problem and the default background came up halfway, like a corrupted .jpg file, so I forced a shutdown. Now I'm back to what I started with. I've been rebooting to see if I can reproduce the good startup, but to no avail. Also, when grub is loaded, it either gives me a purple or black background. Is this normal? It seems to alternate randomly.
TL;DR
I get one of three errors when trying to boot into 11.04 from a clean install next to a fresh Windows 7 install.
"error: unknown filesystem"
"error: hd1 out of disk"
"error: you need to load the kernel first"
I also see a kernel panic every now and again.
I've got a bootable flash drive with 11.04 on it and that's what I've been trying to install from. I've been looking more into this issue, and from what I've uncovered in the forums is that the new grub bootloader that comes with Natty has some issues. I found the procedure for a downgrade of grub to the Maverick version, but I have not come across a 64-bit procedure. This downgrade has worked from what I've read so far.
I made an upgrade from Kubuntu 9.04 to 9.10 and this upgrade generated a series of permission problems.
Considering that I have an individual /home partition, I am planning to make a clean install of Karmic (9.10) on a laptop with a 230GB hard disk and 2GB RAM.
The actual hard disk is mounted the following way:
In total there are some 230GB of Hard Disk available.
The fat 32 partition was not a good idea, because I can't access it from the file manager, so I will dump this partition on my next installation.
Now my question: What partitions would you recommend to mount and what size would you give to each partition?
few months back I did a clean install of 9.10 from 9.04 (wanted to clear room so decided against upgrade path) and since then I've been really struggling to boot into it. I've used Ubuntu since 7.04 and never had any issues with it - these issues have only started happening since my upgrade to 9.10. And I was hoping that 9.10 would be the release I could persuade her indoors to not boot into Windows XP!
Anyway my problem is that when I choose Ubuntu 9.10 from the boot list it gets to the point where the Ubuntu symbol is splashed up (with the brown background and the light shining on it) and then the little progress bar underneath freezes and the whole box freezes. It doesn't respond to any keypresses like the "magic" ones and I have mashed CTRL ALT F1 plus others keys repeatedly. Caps lock doesn't respond either so looks like completely frozen, though worth noting that the hard drive still sounds like it's spinning.
I've tried with every boot command under the sun (noapci, nosplash, quiet, noapic etc.) and none of them make any difference bar two - apci=noirq starts the desktop occasionally but with no windows manager, and irqpoll stops the freeze but it never loads the desktop or manager. Both these last two commands work about 1 in 10 boots or so but usually it freezes. I can also sometimes press Escape as soon as the Ubuntu symbol shows on screen and sometimes (about 1 in 5 tries) it gets into the desktop, but only if I hit it before it freezes up. The above does point to an IRQ issue but wondering what has changed since 8.10 and 9.04 which worked perfectly?
I've also booted into recovery mode and updated/fixed packages but the same thing happens with the recent 2.6.31-19 generic as well as -17, -14 etc. As per above I'm dual booting with Windows XP as the default boot option (wife's orders) but don't think this is related.
I had 8.4 hardy heron and I've been upgrading from within up to the most recent upgrade to 9.10.Was it better to do a clean install from the cd
View 1 Replies View RelatedI'm a relatively new user of Linux, I use Kubuntu 9.10, and I would like to know whether I need to make a clean install for upgrading to 10.4 (I know, stable isn't ready yet, but I'm impatient , and I want to prepare in advance) or I could do it in some way without losing everything I have installed? Or maybe it would be better to only upgrade to the newest version of KDE (I'm using 4.3.2 now)? Which one is easier and/or better? How is it done (Note: using KDE)?
View 3 Replies View Related