General :: Kubuntu 11.04 And Broadcom BCM4311 Wireless Not Working?
May 18, 2011
Yet another Linux newbie with wireless problems I'm afraid. I saw some postings that appear very similar but I don't have any Linux experience and don'h to make uncontrolled changes to the environment without expert advice.Background: I have an old laptop (HP Pavilion dv9000) with Vista installed and a troubled history (overheating motherboard failure), so I put it on the shelf and replaced it with a new Windows 7 laptop (Dell Studio 1555). But I have been intrigued by the Ubuntu reviews and thought I would dig out the old laptop and install Kubuntu 11.04 (replacing the 2 Vista partitions with a single Kubuntu partition).
Kubuntu installation was easy and I am impressed by the Kubuntu interface, but I soon noticed that it was not detecting my wireless router, which works fine for everything else (Dell, Sony Bravia TV and also an internet radio). The wired connection is okay (using it now) so I guessed the problem was Kubuntu notognising the Broadcom BCM4311.The network interface tool shows the wired connection but the Wireless tab is greyed out.I also installed Wicd Network Manager but that just confirmed what I knew.I noticed other threads have asked for the lspci and lsusb details so here they are:
I was told by an experienced Linux user/IT professional that older Broadcom wireless cards had embedded code preventing access through non-Windows OS's. I was told that there were drivers that were basically "hacks" for skirting this issue. I've tried two different drivers and neither seems to be doing the trick. My current driver is the "Broadcom STA wireless driver".
Symptoms
Recognizes my network and others Says it's connected Won't load any web pages Frequently asks for authentication I've authenticated using my network password and my router's security key
Here's what the terminal says about my wireless card:
I'm happily using OpenSuse 11.2/KDE on my laptop equipped with a Broadcom BCM4311 WLAN chip, but today, after a restart, WLAN ceased to work. I mean that Network Connection doesn't show anymore available WLANs. Two things that seem strange to me are that the
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
I have Lenovo Notebook 3000 N100 with built in wireless - Broadcom BCM4311 802.11b/g. The seems to be properly installed(as per the screen shots) but still I can not see any wireless networks. I checked out most of the forum but could not find any exactly matching situation. find the attached results of the below command which might give you idea : sudo lshw -C network
As per one of the screen shot it seems that "This drive is activated and currently in use" still I can not see any routers(including mine) which I can connect. Also the Wifi LED is not glowing.
Windows is shit so im trying out this Ubuntu but i cant get the wireless to work. The light is orange(should be blue) Ubuntu only recognizes the wired network.I cant find a wireless device anywhere is like is not connected... I tried lspci | grep Broadcom Corporation and just lspci with results:lspci:
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I have installed b43 with the install script and I can see all wireless networks fine, but NetworkManager just keeps asking me for the WPA passphrase, despite it being correct. I tried disabling WPA on the router, but then the connection hangs at "Configuring interface" instad. I also tried with ifup, but I'm not sure I configured everything correctly. I don't get any smarter from the NetworkManager logs, maybe someone else can decipher them? tail -50 when connection doesn't work:
Code: Apr 18 17:00:11 jan NetworkManager[1291]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Apr 18 17:00:11 jan NetworkManager[1291]: <info> Config: set interface ap_scan to 1
I just installed latest stable Debian (KDE) on my laptop, Dell Vostro 3400, which uses Broadcom 4313 (I think) wireless controller. I did install the proprietary driver package from Debian called breadcom-sta-common<version no>.deb. I remember it's the same driver I used for my previous Ubuntu installation. I also installed the KDE Network ManagerFront-End and the wireless tab on the manager is disabled (greyed out). I finally tried the steps from Debian Wiki Wireless section and at the end, when I run "modprobe wl", it says "FATAL: Module wl not found". Is there some more steps I need to do?
Recently I moved from Intrepid Ibex to Lucid Lynx and everything went fine during and post installation except wireless B4311. I tried to install the specific driver from System-> Administration-> Hardware Drivers but it comes out with an error logged in file jockey.log
I am new to Linux, nevertheless Ubuntu. I have Lucid Lynx on my laptop, with Windows Vista 32 bit along side of it. I have done some research, and found out thathe wireless connector on my laptop, a Broadcom BCM4312, doesn't work with Ubuntu 10.04. I know that I need a driver
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
I have a HP Mini 5105 SSD netbook, runing Ubuntu 10.10 with 2Gb RAM. My wireless card is a Broadcom BCM43224 802.11a/b/g/n. Its driver is enabled and running. The wired network connection runs fine too. The problem: Wireless stopped working. When I right click on the network icon, the enable network option is clicked, but the "enable wireless" option is listed in dark grey and cannot be clicked on. I have recently updated my kernel version to 2.6.35-24-generic. What I have already tried: this one too I got to know there seems to be a problem with the 2.6.35-24-generic kernel. I have gone into the GRUB menu (it took some time to find out that you have to keep the Shift key pressed during startup for the GRUB menu to show), chosen the older kernel version (2.6.35-23-generic) and then removed the faulty one. Nevertheless, nothing has changed. I still cannot enable the wireless. The outcome to lshw -C network is:
I have updated FC 11 on my hp 6730b laptop as $ su -c 'yum -y update'after updating I logged to kernel '2.6.30.10-105.2.23.fc11.i686.PAE', but my wireless is notworking any idea how to solve it. I have to solve it offline since I have only wireless internet at my work.
I have my broadcom wireless drivers installed and working on my FC14 setup, when the 2.6.35.10-72(and 74).fc14.i686 came up my wireless doesn't work. Making me revert to using version 2.6.35.6-48.fc14.i686. Am I going to have to install the broadcom everytime the kernel is updated? I don't recall doing that on fc13.
after having tried out almost all suggestions found here and elsewhere on the internet, i'm somewhat at my wits end The situation: I'm running Kubuntu 32Bit Version (at the mom 10.4) on a HP-Compaq 6735s (AMD Processor, Vanilla 32Bit Install). My first Install was last year with 9.4 and the Broadcom 4322 wireless worked like a charm after installing the proprietary STA-driver under System -> Hardware Drivers. As the update didn't work out really without glitches, i did a fresh install and lost my wireless. I tried various combinations and tutorials but to no avail. My card is found, the driver installed, but i cannot access my access-point. I can SEE the access point (and all my neighbors'), but knetworkmanager does not seem to do anything. To be sure, I installed wicd (nice tool by the way). Trying a connect here told my my credentials were bad (incorrect passphrase for my WPA2 Personal auth), which is not true. I tried connecting without security, didn't get an IP. So it seems somehow the card is working, but all functions needed for passing information to the access-point are unavailable.
This is what I tried:
both broadcom-drivers fw-cutter installing the driver by hand
Installing the driver via Hardware Drivers produced the same results as any other, viz the card is working, but not connecting. Unfortunately knetworkmanagers error messages are a bit sparse, or rather non existant. My guess is that somehow the firmware is not properly loaded (or the wrong type??).
When I first had partitioned, and formatted appropriately, I installed the newest version of Ubuntu available (Time of posting 10.4), on the partition made with bootcamp, rebooted into Linux with rEFIt Now once I booted into 10.4 I got to the desktop, it started asking me about restricted hardware drivers, so I went into System > Administration > Hardware Drivers, It then searched for the drivers, it found the STA driver, and the B43 driver, I am unable to allow both. So I went on to try ndiswrapper, I downloaded it off another pc, compiled and installed on the iMac. then I got the driver off the Leopard install disk, put that on my flash drive, extracted the files from the installer, put that on the flash drive, then I went back over to the machine in question, copied the file to the desktop, I used the cd command to navigate to the folder, then ran ndiswrapper -i bmcwl6.inf, I made sure that the inf and sys files were in there, so I didn't know what was going on exactly.
So then I went into the software sources, and enabled the cd as a software source, then went into Synaptic, and installed the drivers, it said the install was successful, however when I go back to enable it, will still refuse to activate, I have looked all around for solutions, I have even checked out other threads on this matter. The funny thing seems to be, is that everyone, or almost everyone who has this card on their computer, are upgrading to 10.04, when it worked on a previous version.
I'm having a strange problem with my wireless card (I never had troubles with it so I'd be glad if you could help me in making it work again). I have installed the restricted STA driver for my Broadcom BCM4311 wireless card, and apparently the card is recognized, and in fact I can "see" the available wireless networks and connect to my one.
The strange things is that even if I connect to my network I can't navigate. If I link an ethernet cable, start navigating and after disconnect the ethernet and keep using only the wireless, I can navigate without problems.
after finally installing 11.3, I found that my wireless NIC had stopped working. I've spent about 4 hours trying various online tutorials to get the card working, but I'm still right where I was when I began. The card as reported by lspci:
I have a DEll Mini 9 - it has worked fine even though it has a limited memory. But Husband only uses to have a surf. It now wont connect to net. The Broadcom4312 Wireless Card is not working on Obunto. It has a Dell 802.11b/g Wireless LAN Mini card installed and Obunto Edition Version 8.04 Have phoned Dell and after several calls on Hold for over 15 mins each time and getting nowhere fast i am coming to you guys/girls. I am not a very good comp person, but i do get by and i am trying, so be gentle with me. in simplistic terms.
I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
I have a Hewlett-Packard HP Pavilion dv6000. I had no issues before the upgrade, but after, my wireless driver refuses to turn on the wireless at all. I've seen in most of the posts, people can see the wireless networks but not access them. I can't even get my little orange wireless (off) light to turn blue (on). The "additional drivers" option in "administration" was a bust and I've tried reinstalling the kernel from my original disk iso.
Here is my wireless info: Code: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
I currently have the STA broadcom driver enabled and all I can do is use a cable for internet right now.
I've just completed switching both my laptop and desktop from Ubuntu 10.04 to Kubuntu 10.04, all seems to be working well, except that I can't get my Virgin Mobile HUAWEI E160E wireless broadband modem working. I used to have it working flawlessly in Ubuntu, I've used the smae step as described in this post: [URL] that worked for me with Ubuntu, but the Wireless Broadband tab is greyed out under the manage connections dialog. I'm running the 64-bit version of Kubuntu BTW.
After reading and trying tons of tutorials and several OS reinstalls, I'm stuck trying to load wireless on my Dell Vostro 1400 laptop. Before you say search forums! I hurry to tell I did. No solution seems to work. WLAN chipset - Broadcom's BCM4311 / BCM 2050. 1st scenario - native CentOS 5.3 drivers Although CentOS recognize WLAN card and displays it's name correctly, neither network or NetworkManager sees any of wireless networks.
2nd scenario - Broadcom's drivers Most know Broadcom has released Linux drivers. I had some more luck with them than in 1st scenario although problems occur. After successfully compiling Kernel module, wireless networks are discovered and can be successfully connected but no pages load. It seems like DNS is not resolving at all and page loading timeouts instantly. Tested on TKIP-encrypted network.
"Broadcom would like to announce the initial release of a fully-open Linux driver for it's latest generation of 11n chipsets. The driver, while still a work in progress, is released as full source and uses the native mac80211 stack. "
I'm new to Linux. And I tried using the at command to echo "Hello" after 2 minutes and I saw the following.-$ at now + 2 minutes-at> echo "Hello"-at> <EOT> job 7 at Tue Aug 9 23:59:00 2011So far it hasn't worked. I'm trying to get used to the syntax. Am I missing something?
