General :: Kernel Panics - RAID Or XFS Related?
Jun 21, 2010
After building a new system I have been getting kernel panics randomly. I have been able to look at /var/log/messages and determine that either my RAID card, XFS, or something along those lines is causing the problem. It has now gotten bad enough that any heavy use of the RAID will cause it to panic and die.
There is one large file on this that I need which is not on my backups but when I try to get it off, the transfer will cause a kernel panic within minutes. What is causing the panic? Is there any way to resolve it? The RAID card is an LSI SAS3081E-R and I am using the built in drivers/modules within Ubuntu 10.04 x64 (pretty sure the kernel itself has the driver included). There is source available for the driver from LSI's site but I'm not sure if that will solve the problem and in addition to that, I can't figure out how to compile and install it. It has a Makefile already but make just complains "no targets".
Code:
Jun 21 13:00:22 cyan kernel: [ 706.206498] ffff88019652daf8 ffff88018ff61698 ffff8801935ddd50 ffffea00038f6650
Jun 21 13:00:22 cyan kernel: [ 706.206472] Process xfsdatad/2 (pid: 862, threadinfo ffff8801935dc000, task ffff88019652dac0)
[Code]...
View 14 Replies
ADVERTISEMENT
Jan 23, 2011
My friend's PC recently started acting up. He had me install Sabayon on it and everything was fine until a few days ago. Every app I try to run after the PC boots results in a segmentation fault. I figured maybe something was wrong with the HDD, so I tried to boot from a DSL liveCD to run fsck, but it wouldn't boot; it freezes right away. I then tried the Sabayon LiveDVD and got a kernel panic.Does anyone have any idea what the problem could be? I am completely clueless; I've never had anything like this happen before.
View 3 Replies
View Related
Feb 17, 2011
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
View 1 Replies
View Related
May 10, 2011
I have been a happy Ubuntu and other distros user from 2007 to now. Had my old 7.10 Gutsy Gibbon (Ubuntu Studio actually) that I really felt was time to upgrade. Then I downloaded the ISO image for 11.04 Natty Narwhal past 4 day ago. It gave me an option to install on my old 7.10, upgrading it, then I chose that one not to have to lose my data.
At the very end of the installation (when downloading several packages from the net) I got a kernel panic.
After that I reinstalled from zero wiping the whole partition, with the same results. It only worked when I disconnected the net cable so it wouldn't download anything during install. Then I could run the 11.04, but kept getting kernel panics, and after some testings (I thought it was the nvidia video drivers at first) I think it happens after some ammount of network traffic happens.
Memtest went normal, I tried logging with no-effects and I tried some solutions from forums with no results. The pc can be on and working for hours, but after I start surfing the web for some time, I get a freeze. Sometimes Caps Lock and Scroll Lock leds are flashing, and sometimes just freezes to simply become unresponsive. When it was during the installation I got a message saying it would pop out into console because panic occured and then froze. Anyway I always have to press the reset button.
I would like to be sure if I have some of my hardware broken or if the newest kernel is still green on some hardware support; maybe network. I'd also like to know if I can install older versions of the kernel; I think that should fix the problem because other distros worked perfectly here before. I also heard about some kernel-image-pae being different from the ordinary kernel image. Could it help if I change that package? I'm waiting to install 11.04 in my wife's computer also but of course I don't want to bring any problems on her! My net card is Nvidia Nforce and my processor is AMD Athlon II X2 with a GForce 9400 for video card.
View 4 Replies
View Related
Apr 29, 2009
I'm trying to use and old Dell Dimension 2350 workstation with 1GB of RAM and a 200GB drive as a home server. I boot the CentOS 5.3 install DVD, get to the splash screen and hit ENTER to start the install. The install routine starts and then kernel panics with a very long trace I can't make sense of. I've used the DVD for other installs so I know the media is good.Are there any known quirks to installing linux on a Dimension 2350? Maybe some kernel line parameters like no acpi?? As a test, I took an Ubuntu server cd, and the install actually completed but on reboot it kernel panicked with a similar long trace error. Obviously this is most likely a hardware issue.
View 4 Replies
View Related
Jul 8, 2009
I'm running CentOS 5.3 x86_64 on my laptop (dell vostro 1400, core2duo, 3GB RAM, intel 3945ABG wireless, nvidia video and LAN). The problem is that some times (like 15-20% of times) I shutdown the laptop, I get a kernel panic related always to the wireless kernel module (I haven't been able to get screenshot or anything). I'm using the latest centosplus kernel. I never get these panics with the standard CentOS kernel, however the standard kernel doesn't light the wireless led, and that annoys me a lot. Therefore I'm forced to use centosplus kernel. The question is not how to solve this (i know I've not given enough details) but what to do to diagnose better the cause of the panic and then correct it.
View 3 Replies
View Related
Feb 23, 2010
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code:
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR; Host address width 36
DMAR: DRHD base: 0x0000000000000000 flags: 0x1
IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53
DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe
DMAR: No ATSR found
DRHD: handling fault status reg f0002198
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 1, comm: swapper Tainted: G W 2.6.31.5-127.fc12.i686 #1
Call Trace:
[<c0764636>] ? printk_0x14/0x16
[<c0764580>] panic+ox3e/0xe0
[<c05b4ce3>] __dmar_enable_qi+0xbc/0xd3
[<c05b52d1>] dmar_enable_qi+0xe9/0xf3
[<c09aaecc>] init_dmars+0x1c7/0x5fb
[<c08fb6b4>] ? pci_iommu_init+0x0/0x11
[<c09ab50e>] intel_iommu_init+0x20e/0x2b6
[<c098f6bc>] pci_iommu_init+0x8/0x11
[<c0401143>] do_one_initcall+0x51/0x13f
[<c0989372>] kernel_init+0x19c/0x1ed
[<c09891d6>] ? kernel_init+0x0/0x1ed
[<c04041a7>] kernel_thread_helper+0x7/0x10
View 1 Replies
View Related
Jul 22, 2010
Since the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies
View Related
Jan 4, 2010
F12 Clean Install stopped with line:
[<c04041a7>] kernel_ thread_helper+0x7/0x10
The machine has completed more than 30 hours of HD cleaning with DBAN (overwrites the HD). It used to be able to run F9 or Ubuntu 8.04 but always returned kernel panic during other distro installation attempts. Why after a complete HD clean though?
View 11 Replies
View Related
Sep 22, 2010
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
Here is the details of my system:
Dell inspiron 1520
lspci (snipped)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
[code]....
View 1 Replies
View Related
Apr 7, 2011
Server is 10.04 server edition
[code]...
soon kernel panics. What else to fix here?
View 3 Replies
View Related
Dec 27, 2009
Recently switched my home server from Gentoo to CentOS and have been getting kernel panics consistently since I made the server "live". The machine was built with all new hardware. I'll post relevant configuration info and picture of the kernel panic below. So far all kernel panics have been with kernel "2.6.18-164.9.1.el5.centos.plus", right now I am testing with the kernel listed below to see if it does the same thing (2.6.18-164.9.1.el5).
justin@empire justin $ uname -rmi
2.6.18-164.9.1.el5 x86_64 x86_64
justin@empire justin $ rpm -qa |grep kernel |sort
kernel-2.6.18-164.6.1.el5
kernel-2.6.18-164.6.1.el5.centos.plus
kernel-2.6.18-164.9.1.el5
[Code]...
View 19 Replies
View Related
Mar 28, 2011
I have loaded openSuSE 11.4 on an IBM x3400 box with an Adaptec ServeRAID 8k-l SAS harddisk adapter. openSuSE 11.1 was previously loaded on this box and was using XEN kernels.) The default "desktop" kernel boots and operates correctly. I use this machine to run other XEN virtual machines to run different versions or our companies printer controller application. When I attempt to boot the xen kernel, the kernel cannot locate the root partition (or any other partition) on the hard disk. Here are a few lines of kernel output:
[code].....
View 5 Replies
View Related
Aug 2, 2011
A while ago, when I was using Maverick, Firefox started to crash randomly and led to kernel panics.
So I upgraded to Natty (clean install) and Firefox there too crashed.
Then I was getting graphics and make problems.
Today I tried to install Fedora 15. It first boots to a Live desktop that warned me that my hard drive had 65000+ bad sectors. Sixty-five thousand.
So I got a new one. A WD Scorpio Black, 750GB 7200RPM with Advanced Format.
Again I boot into Fedora 15. OK, no bad sectors. I tried to run Disk Utility Self Tests but it constantly crashed. Fedora warns you about this.
In the Live session, I opened Firefox. It also crashed just like back in Ubuntu. Then the screen flashes black and got warnings after warnings that a kernel module has crashed.
So I took out my old Maverick installation CD and first tried a Live session. However, Disk Utility told me that SMART is not supported while on Fedora, it was.
So I tried to install. But soon after that, I got a warning that the installer has crashed because a file copied to the disk did not match the file on CD. Right now I am in the Maverick Live session.
View 1 Replies
View Related
Dec 11, 2010
In the processing of reinstalling VirtualBox, I found this：2.6.35.6-48.fc14.i686.PAE/source -> /usr/src/kernels/2.6.35.6-48.fc14.i686.PAE/ ，but this folder don't exist.。 I try to relink the ln as source -> /usr/src/kernels/2.6.35.9-64.fc14.i686.PAE , but VirtualBox still get problem with the kernel. Since VirB works fine with other 2 kernels, the solution for this is not quite needed, but I just wonder why this happens. See below. I don't know why these two folder contain different version of kernels. Anybody get an idea?
2.6.35.6-48.fc14.i686.PAE]$ ll /usr/src/kernels/; ll /lib/modules/; ll /lib/modules/2.6.35.6-48.fc14.i686.PAE/ |grep build
total 16
drwxr-xr-x. 22 root root 4096 Nov 19 14:58 2.6.35.6-45.fc14.i686
drwxr-xr-x. 22 root root 4096 Nov 15 00:04 2.6.35.6-48.fc14.i686
drwxr-xr-x. 22 root root 4096 Dec 8 17:08 2.6.35.9-64.fc14.i686
drwxr-xr-x. 22 root root 4096 Dec 8 15:19 2.6.35.9-64.fc14.i686.PAE
[Code]...
View 4 Replies
View Related
Apr 9, 2010
When trying to install RHEL 5.4 on a Flagstone SATA (encrypted hard disk), linux timeouts while loading the ata_piix module.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd 81/00:08:00:00:00/00:00:00:00:00/e0 tag 0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
The above message is repeated several times until the kernel eventually "panics".If I use a non-encrypted SATA (Maxtor, Fujitsu, etc), the install works. It only fails with Flagstone SATA encrypted hard disks.
View 2 Replies
View Related
Feb 18, 2009
I've only used Linux for about a year or two now and have worked through suspend esume and WPA wireless issues with CentOS and my T61p. However, I'm stumped on this one. why my T61p freezes randomly (happened once while writing this topic) with the caps lock light blinking. I'm wondering if it has something to do with my nVidia driversettings andor using my wireless card and/or switching between home wwireless and work wwired connection.
[Code]...
View 11 Replies
View Related
Mar 30, 2011
I tried to install Zenwalk, xunbutu, debian6 linuxmint, linuxpuppy and I've had nothing but Kernal panics not syrcing, host smbus not enabled, lupusave file problems, journal commit i/o error. I've been interested in linux for a long time and I was reading about it working well on old computers. Ive got a 366 celeron with a 4G drive and 160M memory (a real screamer). This computer has had win98 winME and win2K with flawless installations. I'm no expert at this stuff but I've been around since the DOS 3.3 days so I know a little bit. All I want to do is see my hard drive boot up in the linux operating system right now. What the heck is up with this file system?
View 8 Replies
View Related
Jun 29, 2011
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies
View Related
Mar 14, 2011
I have a box that has been running fine for a few years primarily as apache/tomcat/mysql server.Just recently, it has started spitting out a bunch of messages and shutting down.The computer is running FC11, x86x64.If anyone can glean anything from the messagesIf you need any more info, let me know. I can get someone to start it up, and get as much as I can before it crashes.From looking at the messages, it seems like it could be something going on with the swap, but I'm not sure.The messages are below.(The box is on the other side of the country from me, so I don't have a ton of info, and it's hard for me to get someone to physically restart it for me...so it's kind of a pain.)(You'll see a lot of errors related to SSHD. I don't know if that's because SSHD is the culprit, or if it's because I was connected using SSH. For some reason I'm leaning towards it being something other than SSHD.)
Code:
setroubleshootd[2852]: segfault at 33cb1fe909 ip 00000033caf06e8d sp 00007fffe4bf4ec0 error 4 in libpython2.6.so.1.0[33cae00000+165000]
[code]....
View 3 Replies
View Related
Apr 2, 2011
MacBook Pro 5.2 running OSX 10.5 Snow Leopard Disk /dev/sda - 500 GB / 465 GiB - ATA FUJITSU MJA2500B. I formatted my existing partitions with boot camp in OSX to delegate 32 Gig to a space where I intended to install Ubuntu 10.1 along side OSX. I installed Ubuntu 10.1 and now my dual boot option has vanished and the following is what I'm getting from test disk:
[code]...
I can recover my old partition configuration and not loose any data, as the lines are blurring on the related forums for this exact situation and my desire is to not make things worse with "trial and error".
View 6 Replies
View Related
Feb 1, 2011
Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
View 4 Replies
View Related
Dec 16, 2010
I want to use smartd for monitoring my hard disk regularly. What is the interaction of smartd with the hard disk driver that is in use. Whether the hard disk driver should be smart enabled or only the hard disk. Will any one help me in this.
View 6 Replies
View Related
Oct 4, 2009
I had been testing the this link Raid Setup
I can do this in the installation phase, no issue, but I have to know how to make it in a production server.
I follow, read and test the article 3 times without any success, went I try to boot my machine with the raid disk it show error about that cannot find my root "/dev/root"
mount: could not find filesystem '/dev/root'
...
setuproot : moving /dev failed: no such fie or directory
no fstab.sys
[Code]....
But I still don't know what I have done wrong, this is my 3rd time that I try this without any luck, I'm running Centos 5.3 updated. Both disk are the same size.
View 13 Replies
View Related
Jan 25, 2010
I updated my fc12 x86_64 server today, and one of the updated included kernel 2.6.31.12-174.2.3.fc12.x86_64 from the previous one of kernel-2.6.31.9-174.fc12.x86_64.When I boot with that kernel, it stops when my logical volumes that are built on a raid 5 array (linux software raid built using mdadm) are not there.I can start them afterward with mdadm --auto-detect which seemingly loads the appropriate modules and starts the array, but I have never had to do this before.
Reading the mdadm man page, it mentions that this is generally done by the initrd. So, I am guessing the initrd that came with the new kernel is missing something.
View 1 Replies
View Related
Apr 24, 2010
First post so please excuse my lack of correct terminolgy/understanding/etc. Running Fedora 12 with the following software raid setup...
Mount Device Underlying Partitions
/ /dev/md0 /dev/sda1 /dev/sdb1
swap /dev/md1 /dev/sda2 /dev/sdb2
/home /dev/md2 /dev/sda3 /dev/sdb3
Recently updated to kernel 2.5.32.11-99 and upon restart, failed to boot. Get stuck at a recovery prompt asking for root password or Ctrl-D to continue (which reboots system). I worked around this problem by reverting to the previous kernel 2.6.32.9-70. From what I can tell, with the newer kernel there is a problem with device enumeration of software raid volumes.
[Code]...
View 1 Replies
View Related
Nov 11, 2010
SuSE SLES10, 32 bit. I have an app which crashes with general protection often.
There is message every time in /var/log/messages:
2010-10-22T08:49:49.350476+02:00 HostName kernel: ProgramName[28023] general protection rip:404575 rsp:7fffc5656270 error:0
How do I establish relation between this message and source code? Error was observed on another host where some tests were running, now license is expired and I can't get more info nor core dump. I have to investigate what I have and try to reproduce it locally. Unfortunately original binary was stripped.Now I prepared non-stripped version. Does it has the same addresses for function as original? Is it possible to use symbol information for finding where RIP points to?
View 2 Replies
View Related
Mar 20, 2011
I've installed Debian Squeeze on my server several days ago. During install process installer asked me to provide USB flash drive with firmware aic94xx-seq.fw. All went fine. Today I installed all updates to my system with "U" in aptitude. Aptitude installed kernel update 2.6.32-5 and created initrd accordingly. But now I can't boot up my system because it can't find LVM volumes on harddrive connected to Adaptec RAID card. How can I boot my system now? I have USB with firmware.
I have netboot CD. Unfortunately when I tried to edit boot records in grub I found that there is no my old kernel anymore. The only kernel grub sees is the new vmlinuz kernel and new initrd How take make my server alive?
View 2 Replies
View Related
Aug 17, 2011
During SLES11 installation I had to provide additional driver for ServeRAID-M1015 hardware RAID controller because linux didn't see any disks. Now I have to upgrade SLES11 to SLES11SP1 which may include installation of new kernel.
Questions :
1. What happens with this RAID driver after installing new kernel ?
2. Will Linux box start up after installing new kernel ?
View 2 Replies
View Related
Jan 26, 2010
Is anyone else having trouble with frequent kernel panics whenever the Transmission bittorrent client is running? I get them after about 1-2 minutes of having transmission running, and need to do a hard reset. I didn't restart transmission this last time and it has been almost 10 minutes with no problems. I've been having problems left and right with KPs since around 8.04 but previously they were infrequent enough that it was still more convenient than using windows...Every 2 minutes is ridiculous though, if I can't fix it I'm going to need to get another torrent client!
View 3 Replies
View Related
