Ubuntu Networking :: 10.10 Doesn't See My Realtek NIC / Show That?
Oct 12, 2010
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
View 5 Replies
ADVERTISEMENT
Sep 12, 2010
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
View 4 Replies
View Related
Jan 5, 2010
I'm trying to configure the following network card to work with a 1000Mbps switch:
Code:
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
I think the problem is the network card module. When I run
ethtool eth0 nothing of 100Mbps is showed:
[Code]....
View 1 Replies
View Related
May 10, 2010
Trying this on a Lenovo with 10.04. but after a few updates and some basic software (restricted extras) the network manager is missing. I tried installing WICD but that doesn't show up either. Going to the startup applications, it is listed and checked, and dragging it to the panel works, but clicking it does nothing.
View 2 Replies
View Related
Jul 12, 2010
I am having problems with with a Satellite Pro L500 and FC13. The laptop has a Realtek RTL8192SE wireless adapter, which runs under Win 7 that it came with, but refuses to show itself under FC13.
When I run lshw it shows me:
I looked on the web and this forum for clues and someone suggested installing kmod-ndiswrapper. So I installed the yum rpm-fusion repository and an ndiswrapper for my kernel ------ and nothing's changed.
When I do an lsmod I get:
I've been a Fedora Core bunny since FC3 but I've only recently discovered the wonders of wireless networking and this one has me stumped. I don't fancy being reduced to Windoze when I work from home!
View 3 Replies
View Related
Apr 2, 2010
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies
View Related
Sep 1, 2011
I'm on Windows 7 64bit and Ubuntu 11.04 64bit.Windows is on a net book with not so much hard drive space so I want to keep all my music and movies on my hard drive of my Ubuntu desktop. When I try to find my Ubuntu machine I get nothing though..No matter what though, Win7 simply will not see it on the network. Not even when I run "\ipadress"..If anything is there away to delete everything related to Samba and start over?
View 3 Replies
View Related
Feb 10, 2010
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies
View Related
Jun 8, 2010
im just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.
View 9 Replies
View Related
Jul 3, 2010
I have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
View 9 Replies
View Related
Mar 8, 2011
Ubuntu system monitor applet doesn't show internet traffic although my wireless is working just fine. I use a conky to monitor bandwidth through vnstat and had no problem till I upgraded to maverick.
**ifconfig
wlan0 Link encap:Ethernet HWaddr 00:24:d2:c4:3e:da
inet adr:192.168.0.100 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::224:d2ff:fec4:3eda/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 1 Replies
View Related
Oct 14, 2010
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
View 9 Replies
View Related
Mar 25, 2011
I also am having this problem so any help would be appreciated.
Personally, I don't know if I have anything set up correctly. That would be something I need guidance on if anyone can offer some.
View 3 Replies
View Related
Jul 8, 2010
I have been routing network traffic based on MAC addresses, so we can distribute traffic evenly over a series of WAN IP addresses.Everything seems to be going well, but I have a very curious problem. One of the users can connect to the network without problem, but I don't see him in my network administration application (neither his MAC address or leased IP address).At the same time, I'm trying to identify other unknown computers on my network based on MAC addresses I don't have on file.
View 4 Replies
View Related
Mar 21, 2010
Ubuntu 9.04 with working wlan. I had to restart router & wap. It doesn't seem to ever retry to connect. I know my router & wap are good, I have wireless working on other laptop (running Puppy) I had to go into 'edit connections' in drop down and use 'wireless' tab then edit 'wireless connection 1' and hit 'apply' is there a better way to do this? also, no connections show up with command 'iwconfig' edit: with ifconfig, eth1 si showing data my ip address and packets sent & rcvd. I think I'll try do duplicate this event and use 'ifconfig eth1 down' and then up again to see if it reconnects.
View 1 Replies
View Related
Feb 7, 2011
I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies
View Related
Jul 3, 2010
I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
View 1 Replies
View Related
Feb 9, 2011
So, now that I got http://bit.ly/h70Nnf sorted out, how come doesn't my Mobloquer show anything in the log. I'm used to Peer Guardian 2 in Windows and I know it has to show some more stuff than nothing.. Your help is sincerely appreciated cuz I'm so new to Ubuntu. FYI: Mobloquer and Peer Guardian 2 are IP blocking programs.
View 2 Replies
View Related
Jul 5, 2011
I an trying to install ubuntu onto my old Windows XP computer, I have burned the **** with the ISO files on it with a Mac and also tried using Windows 7, they have the files when I load them on those, but when I go to put the disk in my Windows XP computer it say's the disk is blank. I reboot my computer, and it doesn't try to install anything.
View 9 Replies
View Related
Mar 12, 2010
I'm running ubuntu 9.10 64 bit on a Dell Latitude E6400 with the following configuration:
Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 3MB L2 Cache 1066 MHz
Intel Graphics Media Accelerator x4500HD
4GB RAM
250 GB Hard Drive SATA 7200RPM
I'm experiencing overheating problems, after just 15-20 minutes of minimal use (surfing the internet, not even watching flash vids or any other vids). The same laptop under Windows 7 64 bit stayed really cool.
I've read several posts here and followed this manual: [URL] to try to control the fans (I only installed the lm-sensors and ran the sensors command, I didn't do anything beyond that). Specifically what I did was install lm-sensors (via apt-get), ran sensors-detect which advised me to add the coretemp module to /etc/modules, which I did.
However when running sensors the only information I get is the overall temperature and the temperature of each of the cores.
why I'm not getting fan speed info when running sensors? Also is there a way to find out if more modules needs to be added to /etc/modules?
View 9 Replies
View Related
May 3, 2010
i upgraded to 10.04.tty1 comes up on a black page and password will not enter.Tried esc on boot and none of that works.It shows 9.10 installed no 10.04.I need a way on
View 2 Replies
View Related
May 8, 2010
when I am having a conversation in empathy, I find that some messages people have sent me, don't arrive. Also the other way around: people don't receive messages I have sent them. I use ubuntu 10.04 now, but this also occurred to me in 9.10.
View 3 Replies
View Related
Aug 8, 2010
why the bootloader won't show up when I turn on the PC. The only things that come up with search results are 'Why ubuntu isn't on the boatloader' but my problem is is that the boot loader doesn't even SHOW UP.
Installation went completely fine, downloaded a version 10 32-bit iso file and then put in the folder with wibu and it asked me to restart. Restarted the PC, nothing came up so I thought you might have to restart again, restarted again, still no bootloader.
After looking in the 'Add/Remove Programs' of Windows it does say it's installed, so why the bootloader isn't showing up is rather mindbobbling.
View 1 Replies
View Related
Aug 15, 2010
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-24-generic
Found initrd image: /boot/initrd.img-2.6.32-24-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
done
I know that Windows 7 is still on the system, I just can't access it.
View 5 Replies
View Related
Oct 1, 2010
I'm facing a boring problem and I cant understand why it is happening. Im running Evolution 2.28.3 on Ubuntu 10.04, and all the messages are not showing their images. I already did the following confs:
1) Change proxy to connect "Directly to the internet"
2)In Preferences, "Load images from contacts".
3)I tried the option "Load Images" ou CTRL+I.
View 1 Replies
View Related
Oct 14, 2010
I've just upgraded to Maverick and as the Me menu works with Empathy I started to use it as my default IM client.
But no matter what I do, it won't show my picture.
I tried resizing the picture to 96x96, I tried to convert it from jpg to png. I tried uninstalling the program with apt-get remove --purge. I tried also removing the ~/config/Empathy directory and all others related to the program and then reinstalling it but nothing seems to work.
I even made a video aboout it, maybe I'm doing something wrong: [URL]
View 1 Replies
View Related
Nov 29, 2010
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
View 4 Replies
View Related
Jan 14, 2011
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
View 9 Replies
View Related
Apr 1, 2011
I have maverick meerkat. I'm tryting to play a video but it has a VP7 codec and VLC will not play it. I installed mplayer but it doesnt show up in the sound and video menu options. I have Movie Player but not Mplayer Movie Player?
View 7 Replies
View Related
Apr 9, 2011
So, as the title says Windows 7 doesn't show up in GRUB2's selection menu, but it does show my Windows XP professional option that I had before Linux and then reinstalled. After searching very long for the problem in Linux and GRUB2 I decided to boot into XP, witch gave me the option for Windows 7 or older versions of Windows -> so I eventually can boot to it! So here is the real question: How can I make an entry for Windows 7 and for Windows XP? This is because I'd like to use a theme for GRUB and it would be to stupid to make GRUB look nice if I then come to a stupid screen of the Windows loader!
View 9 Replies
View Related
