Ubuntu Networking :: 10.10 - RT3070 Driver Install Error
Dec 21, 2010
I am trying to install this driver in ubuntu 10.10 for a week. I am getting this error when I type {sudo make}
cimi@cimi-pc:/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO$ sudo make
make -C tools
make[1]: Entering directory `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools'
/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/Makefile
make -C /lib/modules/2.6.35-23-generic-pae/build SUBDIRS=/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-23-generic-pae'
make[2]: *** No rule to make target `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/.c', needed by `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/.o'. Stop.
make[1]: *** [_module_/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-23-generic-pae'
make: *** [LINUX] Error 2
This is the last driver in ralink website. The built-in driver works but don't recognize my chipset and i wanna install this driver. My URL card is levelone wua-0603 usb [URL].
View 9 Replies
ADVERTISEMENT
Aug 19, 2010
I am trying to get my usb wireless to work on Ubuntu 10.4 I found a how to and followed it but when I did a Make install this is what I got.
make -C /home/ronald/Downloads/DPO_RT3070_LinuxSTA_V2.3.0.4_20100604/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/ronald/Downloads
[Code].....
View 5 Replies
View Related
Mar 7, 2010
I'm running ubuntu 9.10 and I'm trying to get my RNX-ESYN1 with rt3070 chipset to work. I've tried to download and install the newest drivers from ralink's page and when I type "lsusb" in a terminal I get this "Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp." so that means if it's plugged in and should work. In the network manager it shows only my PCI broadcom card, but not my USB stick. When I type in the "iwconfig" command I get the "ra0" but not in the network manager.
ra0 RT2870 Wireless ESSID:"" Nickname:""
Mode:Auto Frequency=2.412 GHz
Link Quality=10/100 Signal level:0 dBm Noise level:-143 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[Code]...
and still nothing changed, I got it to work once, but I reinstalled my system and can't get it to work again. I don't know if I'm doing something wrong. Last time I did it, both of my wifi adapters were showing up in the network manager at once and were working great. I need my Ralink to use with the aircrack which doesn't work with my broadcom.
View 9 Replies
View Related
Oct 3, 2009
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v2.0.1.0 driver from Ralink. I am running Fedora 2.6.29.4-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output.
[chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v2.0.1.0.tar.bz2
tar: Record size = 8 blocks
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/2870_rtmp_init.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/ba_action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data_2870.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_info.c .....
cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
make: *** [install] Error 2
[root@fedora 2008_1225_RT3070_Linux_STA_v2.0.1.0]#
View 14 Replies
View Related
May 13, 2010
I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?
View 2 Replies
View Related
Jan 11, 2011
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
View 9 Replies
View Related
Jan 12, 2011
I have been installing via wiki instructions and I am stuck installing a USB wireless. Where should I be going with this?
PHP Code:
debianportable:/home/dave# modprobe rt73usb
debianportable:/home/dave# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
View 14 Replies
View Related
Oct 12, 2010
I am using Linux Mint 9. I have an ATI HD4830 graphics card and i am trying to install the latest ATI drivers (ati-driver-installer-10-9-x86.x86_64.run) but get this error.
I was following the following:
View 2 Replies
View Related
Oct 16, 2010
I Just installed Ubuntu 10.10 and i'm trying to install the lates driver from ATI
I don't want the one from synaptics
I'm getting the next error:
View 1 Replies
View Related
Apr 10, 2011
I am trying to install NVIDIA graphics drivers. I can execute the .run but it comes up with an error the X Server is in use and needs to be closed.
I have tried to run
Ctrl Alt Backspace
and
sudo /etc/init.d/gdm stop
But the terminal requests the root password and I can not enter anything for the password in the line. If I go to the next line and enter anything the password fails.
View 1 Replies
View Related
Apr 28, 2011
I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"
I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?
View 3 Replies
View Related
Mar 27, 2011
I'm new to Ubuntu as of yesterday, and know very little of Linux in general. I tried RedHat for a while about 10 years ago and remember almost nothing from the experience. I'm up and running with everything working great with one exception -- my wireless. The error: Contents of jockey.log as suggested: -Sorry, it's long. Not sure what (if anything) is relevant.
[Code]....
View 8 Replies
View Related
Feb 17, 2009
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 Replies
View Related
Jun 28, 2010
I am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error:
Makefile:65 *** Linux source not found. Stop.
View 2 Replies
View Related
Nov 8, 2015
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
View 14 Replies
View Related
Feb 17, 2011
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies
View Related
Mar 31, 2011
I tried to install the nvidia driver using yum. I had the nouveau graphic driver installed. I didn't follow any tutorial I just installed the nvidia driver over the installed one. Thinking that yum would take care of everything for me. When I rebooted I get as far as "registering binary handler for windows applications" I can still log on using alt+f2 and mount the file system using chroot but I cannot get any network access. When I use netstat -nr nothing is configured. I can't ping my router or any other computer on the network.I figure I should disable the nouveau driver and try to use the nvidia tutorial by leigh123linux to get the desktoop up again but I need net access to do that.I have no idea how to get that done. I have tried, ifdown/ifup, /etc/init.d/networks restart, service network stop/start/restart, ifconfig eth0.
View 2 Replies
View Related
Oct 5, 2010
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
View 5 Replies
View Related
Aug 21, 2011
I need to install b43 driver for my bcm4315 wifi card. I herd that bcm4315 need a firmware called firmware-b43legacy-installer is needed to do this.So how can i install the driver...I have installed it once and when i am trying to activate it using ubuntu drivers and install it shows error system error:archives failed().
View 4 Replies
View Related
May 29, 2010
I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
View 1 Replies
View Related
Sep 28, 2010
It's my first time trying out a Linux and everything is going great except for my networking. I just recently purchased a wireless usb adapter 802.11n and I tried to install the driver from the cd it came with, but when I read the readme file it said it only supports up to kernel versions 2.6.18 ~ 2.6.29. Since I'm using Ubuntu 10.04 my kernel type is 2.6.32.25. Does anyone know if there are any updated versions of similar drivers online? or do I have to return this wireless adapter and get a different one?
View 9 Replies
View Related
Aug 14, 2010
I downloaded my linux wireless driver (realtek 8191se), but I don't know how to install it because there is no .exe file(like windows). It has a readme file which says :
"You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User sudo su
1. Compile driver from the source code make
2. Install the driver to the kernel make install reboot"
View 1 Replies
View Related
Feb 13, 2011
I downloaded a ralink driver for my wireless usb adapter and just need a bit of help installing the driver (RT3572USB)
View 9 Replies
View Related
May 2, 2011
I just upgraded ubuntu to 11.04 and I need to install the wireless driver again. I downloaded the driver and I am getting the following error when running make:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated. Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
Here's what I already installed on my laptop trying to get it fixed.
gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4)
2.6.38-8-generic
lrwxrwxrwx 1 root src 22 2011-05-01 22:16 linux -> linux-headers-2.6.38-8
drwxr-xr-x 24 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8
drwxr-xr-x 7 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8-generic
drwxr-xr-x 4 root root 4096 2011-05-01 22:10 linux-source-2.6.38
[Code].....
View 9 Replies
View Related
Feb 12, 2010
I have recently installed kubuntu 9.04 on my laptop. i then connected an ethernet cable and upgraded it to kubuntu 9.10. but i would like to connect to the internet using wireless. but i do not know how to install the windows wireless driver for my card on this OS. my card is: D-link AirPlus G DWL-g630.
View 6 Replies
View Related
May 3, 2010
I have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
View 1 Replies
View Related
May 3, 2010
I installed Ubuntu 10.04 on my PC last weekend. Other than the fact I had no sound (that's another story...), everything went fine. I then got prompted to install nvidia graphic drivers. Since I installed them and rebooted, i cannot get acces to my ethernet connection. I tried the solutions listed here, but none worked. Also, when i boot on my windows OS, the Internet is working properly. I tried tonight re-installing Ubuntu 10.04. I thought if the graphic caused problem, maybe a new blank installation would just do it.
View 2 Replies
View Related
Jul 25, 2010
install a wireless card driver.
View 4 Replies
View Related
Sep 10, 2010
Can't install wireless network driver. The output of 'lsmod' is:
Module Size Used by
ndiswrapper 183164 0
i915 172552 2
drm 142208 3 i915
[code]....
And the output of 'sudo rmmod ssb' is:
ERROR: Module ssb does not exist in /proc/modules
View 4 Replies
View Related
Dec 27, 2010
Told me to fo to /var/log/jockey.logGot this I believe? what may be wrong?
2010-12-27 21:22:37,907 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2010-12-27 21:22:37,990 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx:
[code]....
View 9 Replies
View Related
