Ubuntu Networking :: No Ethernet After Graphics Driver Install?
May 3, 2010
I installed Ubuntu 10.04 on my PC last weekend. Other than the fact I had no sound (that's another story...), everything went fine. I then got prompted to install nvidia graphic drivers. Since I installed them and rebooted, i cannot get acces to my ethernet connection. I tried the solutions listed here, but none worked. Also, when i boot on my windows OS, the Internet is working properly. I tried tonight re-installing Ubuntu 10.04. I thought if the graphic caused problem, maybe a new blank installation would just do it.
View 2 Replies
ADVERTISEMENT
May 10, 2011
I have a dual boot on my computer - with ubuntu 9.04 jaunty jackalope on one side of the partition, and windows 2000 on the other. I recently bought - and had installed - a new ethernet card: TP-LINK network adapter TF-3239DL. It works perfectly on windows, but not on linux. I understand that the problem is that I need to install the linux driver, which I have available (comes in the CD), but I don't really understand how I am supposed to proceed. The instructions are very unclear to me, and I have relatively little experience.
View 9 Replies
View Related
Dec 12, 2008
There seems to be some trouble with 8139too not working in a previous post. Has anyone found a solution to this? ubuntu version 2.6.24 (Hardy Heron?). Followed all known possibilities but information is all mostly out of date. module 8139too.ok? does not load. Following makefile on 8139too.c supplied, after altering to suit my version, comes up with 3 pages of errors?. ifconfig shows nothing for eth0like the last person markjuggles i have hit a brick wall here. Am I wasting my time?
View 10 Replies
View Related
Aug 18, 2010
i m using acer aspire,and it is intel 945gm. i click on extra in preferences but nth happen
View 9 Replies
View Related
Mar 1, 2011
I have installed ubuntu 10.10 on a hand me down computer and put a new network card in it (planet ENW 9503) i have managed to locate a linux driver for it from planet.com but i have no idea how to get it to work i have tried a few things it says to do in terminal. everything i have looked up needs an internet connection?
View 1 Replies
View Related
Mar 1, 2011
I have installed ubuntu 10.10 on a hand me down computer and put a new network card in it (planet ENW 9503) i have managed to locate a linux driver for it from planet.com but i have no idea how to get it to work i have tried a few things it says to do in terminal. everything i have looked up needs an internet connection?
View 9 Replies
View Related
Mar 23, 2010
I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.
It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]
I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".
View 2 Replies
View Related
Aug 17, 2010
My laptop was on windows xp and when I installed ubuntu linux my NIC Card driver was gone (I think) and now I can't connect to the internet using an ethernet. I have the driver on the desktop of my Linux laptop but I don't know how to add it using terminal or any other options.
View 1 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
Jun 21, 2011
I've got a Dell Optiplex Desktop here, the CPU is a Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. The integrated ethernet here is from intel also, it's a 82579LM Gigabit Network Connection. This computer is running a Debian Squeeze 64bits, distrib sid, kernel 2.6.39-2-amd64.Well, here goes the story. I had a lot of trouble with the ethernet card, being very slow, and it just didn't work when i was using tftp. So I downloaded and compiled the latest driver available on Intel website. Currently with debian sid, the version for the driver ( e1000e ) is version: 1.3.10-k2. From Intel I got the version 1.3.17-NAPI.Alright, so I build it, and move the module manually to the right place, replacing the previous version at the same time ie :
$ sudo cp e1000e.ko /lib/modules/2.6.39-2-amd64/kernel/drivers/net/e1000e/e1000e.ko
However, there is is still something bothering me. When I want to check, after rebooting, that I did it right, here is what happens :
$ sudo ethtool -i eth1
driver: e1000e
version: 1.3.10-k2
[code]...
So, which one should I trust ? Is there something I didn't do properly when installing the module ? Or maybe I just don't understand ethtool and modinfo enough.
View 5 Replies
View Related
Jan 1, 2010
I downloaded my Proprietary ATI Linux Driver (for my Radeon Xpress 200) from [URL]... But I cannot figure out how to install it!I followed the instructions here but Terminal told me "command not found". I also tried double-clicking the file but it opened with gedit and gave me an error.
View 9 Replies
View Related
Feb 15, 2011
I just installed virtual box on my winXP, and also installed ubuntu on virtualbox but it is extremely hard to install virtualbox graphics driver on ubuntu
View 2 Replies
View Related
May 30, 2011
Today I realized that my newly installed Natty does not recognize the Ethernet port, I used to have it when I was working on the Ubutnu 10.10. The following is the output (only the network related part) of lshw command:
Code:
-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[code]...
View 5 Replies
View Related
Sep 16, 2010
i have rtl 8111/8168b gbe ethernet card. i hav downloaded its tar file from from gigabyte website.......kernel version is 2.6.18-8.el5
View 1 Replies
View Related
Feb 1, 2010
I have a dell studio 15 laptop which has a ati radeon 4570 512 graphics card and i m using fedora 12 my problem is that, on the ati site there is not any dedicated graphics driver for my 4570 on ati site, i just want to know how can i install grahics driver for my f12 OS. is there is any one in the community who is using a similar ati card
View 1 Replies
View Related
Mar 1, 2011
I am thinking of buying a new computer. It has ATI Radeon HD 3000 Graphics. Will that work with Fedora 14? Will I need to install a driver to get it to work? If so, where would I download that driver?
View 3 Replies
View Related
Apr 9, 2011
I'm trying to install a driver for a Radeon x700. I downloaded the driver from the site and the sh command to install it but this is what I got.
View 2 Replies
View Related
Jul 3, 2011
i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.
lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:
Broadcom NetLink BCM57780
I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.
-------------------------------------------------------
EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card
View 4 Replies
View Related
Jan 2, 2010
I have a Dell Inspiron E1505, which has the Dell Wireless 1505 (Broadcom) card. To run the card, I installed the Broadcom STA wireless driver, which seems to activate the wireless card OK. The problem is that once I installed that driver my onboard Ethernet card was deactivated (and yes, it is enabled in BIOS). I had to remove the wireless driver to get the Ethernet back. Does anyone have ideas? I haven't found this problem listed elsewhere. I am running Ubuntu 9.04 with no other problems.
View 5 Replies
View Related
Feb 13, 2011
When I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
View 9 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Apr 8, 2010
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
View 14 Replies
View Related
Jun 25, 2010
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
View 7 Replies
View Related
Apr 12, 2011
I have just had to install CentOS 5.6 on a family members computer, as they lost there Windows XP key. Anyway, I am needing to install a new nvidia graphics driver. I found a howto on this forum for 5.2 [URL]
View 5 Replies
View Related
May 18, 2010
Our BIOS use AMI,Memory:1GB,CPU:Z510,
then install ubuntu 9.04,GMA500 Driver,but refer Inf is:
The following error was encountered. You may need to update your configuration to solve this;
(EE) psb(0):THE STOLENbASE IS :OX1FC00000
(EE) psb(0):Screenindex is:0;
fbphys is :0x1fc00000;fbsize is:0x003bf000
(EE) Psb(0):Could not find a valid initial configuration for this screen;
(EE) screen(s) found, but none have a usable configuration;
, then I try to modify the Stolen Memory to 8MB,but result no change; I doubt BIOS need do some change ,but don't know how to do,
View 1 Replies
View Related
Jun 7, 2011
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
View 2 Replies
View Related
May 22, 2010
I changed a mainboard so the network card is RTL8111/8168B Gigabit now. By "ifconfig -a", there is only io, no eth0.
I got a driver r8168.ko from: [URL]
After I insert the r8168.ko, there is eth0. Run "/etc/init.d/network restart", it reports "Determing IP information for eth0... failed; no link present, Check Cable", and I noticed the lights of network card and runter are all off. I can use "ifconfig eth0" now but it cannot connect to other machine.
It's Gigabit card and my runter is 10/100M. I tried "#insmod r8168 speed=100 duplex=1 autoneg=1" and "#insmod r8168 speed=100 duplex=0 autoneg=1", it can not get IP by DHCP either. I also build the .ko from Realteck source code, the behavior is the same.
if I need to do other configurations?
My CentOS is CentOS5, 2.6.18-8.el5 #1 SMP.
== BEGIN uname -rmi ==
2.6.18-8.el5 i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
[Code].....
View 5 Replies
View Related
May 28, 2011
I patched my wireless driver in order to support packet injection. Using this tutorial:
- Install the Firmware:
Code:
- Create new directory:
Code:
- Now disconnect Internet and unload all your driver (use rmmod command)
- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:
Code:
Blacklist the wl driver: (STA driver)
Code:
Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:
FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument
View 9 Replies
View Related
Nov 29, 2010
I installed FC14 on my Lenovo Thinkpad T410.
I want know if is possible to install additional graphics driver and how to.
View 4 Replies
View Related
Jul 16, 2011
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
View 7 Replies
View Related
