I am using Linux Mint 9. I have an ATI HD4830 graphics card and i am trying to install the latest ATI drivers (ati-driver-installer-10-9-x86.x86_64.run) but get this error.
I was following the following:
I Just installed Ubuntu 10.10 and i'm trying to install the lates driver from ATI
I don't want the one from synaptics
I'm getting the next error:
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 Replies View RelatedI have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
I am trying to install this driver in ubuntu 10.10 for a week. I am getting this error when I type {sudo make}
cimi@cimi-pc:/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO$ sudo make
make -C tools
make[1]: Entering directory `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools'
/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/Makefile
make -C /lib/modules/2.6.35-23-generic-pae/build SUBDIRS=/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.35-23-generic-pae'
make[2]: *** No rule to make target `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/.c', needed by `/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/.o'. Stop.
make[1]: *** [_module_/etc/2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-23-generic-pae'
make: *** [LINUX] Error 2
This is the last driver in ralink website. The built-in driver works but don't recognize my chipset and i wanna install this driver. My URL card is levelone wua-0603 usb [URL].
I am trying to install NVIDIA graphics drivers. I can execute the .run but it comes up with an error the X Server is in use and needs to be closed.
I have tried to run
Ctrl Alt Backspace
and
sudo /etc/init.d/gdm stop
But the terminal requests the root password and I can not enter anything for the password in the line. If I go to the next line and enter anything the password fails.
I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"
I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?
I'm trying to do a fresh install of fedora 12 on a Dell optiplex 380, using the fedora 12 i686 DVD. During the installation process I get a network driver installation error shown below. Anyone know how to resolve this?
View 6 Replies View Relatederror: No output seen in over 300 sec... (Is the CD-ROM/DVD source repository enabled? It shouldn't be!) error: Package install command failed with error code 255 Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
I've tried this [URL] but it didn't work for me. My sources.list already had the #. By the way I'm a new user to ubuntu and I'm having a pretty good time. Almost starting to feel at home in this OS. edit: I'm sorry. I realized I posted in the wrong section.
I am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error:
Makefile:65 *** Linux source not found. Stop.
I've just finished installing lucid and started setting up my tablet and all went well until I tried to install the fpit driver. I tried installing it from synaptic but it says it has to remove ubuntu-desktop, xorg, xserver-core -- some very important things and then says "xserver-xorg-input-fpit: Depends: xserver-xorg-core but it is not going to be installed." I tried downloading the deb and extracting the driver manually but Xorg complains with:
Code:
(II) LoadModule: "fpit"
(II) Loading /usr/lib/xorg/modules/input/fpit_drv.so
(II) Module fpit: vendor="X.Org Foundation"
[code]....
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedI tried to install the nvidia driver using yum. I had the nouveau graphic driver installed. I didn't follow any tutorial I just installed the nvidia driver over the installed one. Thinking that yum would take care of everything for me. When I rebooted I get as far as "registering binary handler for windows applications" I can still log on using alt+f2 and mount the file system using chroot but I cannot get any network access. When I use netstat -nr nothing is configured. I can't ping my router or any other computer on the network.I figure I should disable the nouveau driver and try to use the nvidia tutorial by leigh123linux to get the desktoop up again but I need net access to do that.I have no idea how to get that done. I have tried, ifdown/ifup, /etc/init.d/networks restart, service network stop/start/restart, ifconfig eth0.
View 2 Replies View RelatedI need to install b43 driver for my bcm4315 wifi card. I herd that bcm4315 need a firmware called firmware-b43legacy-installer is needed to do this.So how can i install the driver...I have installed it once and when i am trying to activate it using ubuntu drivers and install it shows error system error:archives failed().
View 4 Replies View RelatedUsing 9.10 64bitSelect System->Administration->Hardware DriversReceive list box of available driversSelect desired driver from listPress Activate buttonReceive error popup containing the following text:You are not authorized to perform this action.I am not prompted for a password as I expected.The userid logged in is the first/only userid created during installationAccording to /etc/group the logged in user id is a member of adm and adminAccording to /etc/sudoers %admin ALL=(ALL) ALLI figure I am doing something wrong, but since I am not getting prompted for a password maybe the command is not correctly being executed under sudo.
View 4 Replies View RelatedI just used a Brothers script to install driver for my new printer MFC-9840cdw and now Synaptic will not open at all, giving following error message:QUOTEE: The package mfc9840cdwlpr needs to be reinstalled, but I can't find an archive for it.E: Internal error opening cache (1). Please report.END QUOTEWhat can I do to get Synaptic to work again, because I read it is the best way to install these drivers. I would like to uninstall the printer and start over using Synaptic.
View 4 Replies View Relateda little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
I'm trying to install a broadband internet USB stick from Huawei Technologies Co., Ltd. E1552 (HSPA modem) using wine. The installation requires 2 processes first was the izap installation which was sucessful and then the iboost installation which failed with the following error:
Error Number:0x80040702
Description:Failed to load Dll:InstUtil
Setup will now terminate
I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
I recently installed Lenny 5.0.3 i386 onto an old HP XE783 box. I've got a couple of errors that pop up on boot, and I'm not sure how to troubleshoot them. A couple of the lines from /var/dmesg that strike me:weird, boot CPU (#0) not listedby the BIOS. ACPI Error (dsopcode-0595): Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) [20080321] {along with two other ACPI Errors (psparse-0530): Method parse/execution failed; and (uteval-0233): Method execution failed.}.Error: Driver 'pcspkr' is already registered, aborting.
The most annoying thing (I think) has to do with the ACPI errors: the box won't power down after issuing a shutdown command; it bumps into single user mode then prompts for the root PW.
I just installed Ubuntu on my brand new system that I built. I put in my cd for my HD 5770 video card, and an icon shows up on my screen XFX_VGA_V9.8C text under it.
However when I try to access it in anyway, I try to open with autorun prompt, I get a message "This medium contains software intended to be automatically started. would you like to run it?"
I click on run and get "Error autorunning software, cannot find the autorun program."
Is there anyway that I can run this disk. It's important for setup. I cant copy the disk to the desktop, I get errors.
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
So I go to install the Minimal Ubuntu edition and get to the ethernet driver selection part and it can't figure out what driver I have (Odd since Ubuntu regular can).
View 8 Replies View RelatedI need driver for this printer and how to install.
View 3 Replies View RelatedDoes anyone know how to install the video driver for a ATI HD5770 video card in 10.04? It was working, some recent update screwed it up, now I cannot reinstall it. What do you have to delete in order to fully get rid of the remnants of the old driver?
What packages have to be installed before or after though Synaptic? Are you supposed to install it by downloading the driver from ATI and SHing it? Or are you supposed to go though System->Hardware Drivers?
System - Xubuntu 8.04.4 but equally valid for other Ubuntu variants.I installed an updated driver for an Intel network card by doing a "make install" from its src directory (copied from install CD). That appears to have successfully created a file named "e1000.ko" and placed it in a subdirectory named "e1000" in the appropriate /lib/modules/.../drivers/net directory. Based on the contents of the Makefile the "make" also invoked "depmod -a". The "make" doesn't appear to have done anything else interesting.
However, on reboot this new module is not the one being loaded (based off of strings in the dmesg log file), instead the original as distributed with Xubuntu is.Obviously, I have to do more than the installation instructions on Intel's CD say to do.What steps do I still need to do to get this new driver recognized in place of the original?(it is no huge deal if the only answer I get is an honest "Don't bother" since the driver that came with Xubuntu appears to work "fine", however the Intel driver is a full Version number higher so I'd expect it to be somewhat "better" by some measure)