I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 RepliesAfter a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
I am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error:
Makefile:65 *** Linux source not found. Stop.
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies View RelatedIve installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
I'm trying to install Ubuntu 10.04 (32 bit)on my laptop (where currently is installed the amd64 version of Ubuntu 10.04 that I've decided to remove because of some small issues).I've tried using the installation CD (the same I've used to install it on my desktop, so I know that is a working copy),but at boot, although I select to boot from CD, the Live version doesn't start and Ubuntu 64 is run as usual.I've tried to create a startup diskon a usb pen,there the live version seems to start but then Busybox 1.3 is loaded and there is an error with initfrm saying that no operating system can be found.I've been told to download the alternate edition, but I'm still downloading it,
View 3 Replies View Relatedheres what happenned:
1. had working xp install on 320 gb hard disk with only one partition.
2. backed up and used easeus to shrink and create new partition on same hard drive.
3. tried to install from a working live cd but got medium not found error.
4. looked for fix but didnt find it so i used wubi to install it to the partition i created.
5. worked but annoyingly slow so looked for guide to switch from wubi to full install.
6. followed guide and it installed to a new partition i made with gparted and it formatted that one to ext4 but i still had the wubi install which i didnt want. (btw, non-wubi is much > wubi install).
7. went to xp to uninstall wubi, delete wubi partition, and grow full ubuntu install partition with easeus. easeus requires reboot.
8. restart comp to find an error that said no partition found and something else about grub rescue.
9. try live cds but hard drive not detected and tried win7 and xp but they didnt even get into setup
10. make plan: get bro to format my hardd disk using his compyter so i csn try ubuntu onw more time
i got a bunch of different types of errors but im really close to giving up on it entirely.
I am using Linux Mint 9. I have an ATI HD4830 graphics card and i am trying to install the latest ATI drivers (ati-driver-installer-10-9-x86.x86_64.run) but get this error.
I was following the following:
I Just installed Ubuntu 10.10 and i'm trying to install the lates driver from ATI
I don't want the one from synaptics
I'm getting the next error:
I am getting a message at my first re-boot after install of "Error 15: File Not Found", and that's as far as it goes. I just installed Fedora 11 on a Drive that I had recently ran Ubuntu 9.04. I did re-partition and format the drive. I am also running Win XP Pro on another drive, and can boot from either. The computer is older, but all the hardware seemed to work fine with Ubuntu and altough I had to format the install drive a couple times the installation seemed to go ok.
View 4 Replies View RelatedAfter preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
I'm in the process of trying to install FC14 64 bit to my Window 7 64 bit system. This new system has a 6.0 Gb/s internal hard drive.When I reboot with the F14 install disk I have made it past the disk verification (is Verified) and then picking a language but then I get the message "No usable disks have been found". In Win 7, the Disk Management window shows that 184 GB of space are free. Is there some disk preparation that I should do to make this space available?
View 11 Replies View RelatedI am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
just installed a fresh copy of fedora 12 and getting this error when trying to update the system.
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
Running System>Adminstration>Software Udates, I get the following errors
[code]...
Similarly, if I click on System>Add/Remove Software>Package Collections, I get No groups could be found. A cache refresh should fix this. I don't see how to do a cache refresh. I tried rpm --rebuilddb, which didn't do any good and um clean all which also did no good. I did manage to do the updates with yum updates But I don't want to have to use yum at the command line all the time to do updates.
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedI tried to install the nvidia driver using yum. I had the nouveau graphic driver installed. I didn't follow any tutorial I just installed the nvidia driver over the installed one. Thinking that yum would take care of everything for me. When I rebooted I get as far as "registering binary handler for windows applications" I can still log on using alt+f2 and mount the file system using chroot but I cannot get any network access. When I use netstat -nr nothing is configured. I can't ping my router or any other computer on the network.I figure I should disable the nouveau driver and try to use the nvidia tutorial by leigh123linux to get the desktoop up again but I need net access to do that.I have no idea how to get that done. I have tried, ifdown/ifup, /etc/init.d/networks restart, service network stop/start/restart, ifconfig eth0.
View 2 Replies View RelatedTrying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
I'm trying to do a fresh install of fedora 12 on a Dell optiplex 380, using the fedora 12 i686 DVD. During the installation process I get a network driver installation error shown below. Anyone know how to resolve this?
View 6 Replies View Relateda little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
I am trying to install F12 on my desktop. I previously had F9 installed. I zero-filled the harddrive before attempting installtion. When attempting to install F12 from the DVD I get various messages about needing drivers. The drivers listed seem to run the gamut from network cards to harddrives. I have an SATA drive installed as my primary disk. I have not been able to install any version since F9 so I thought I should finally try to nail down what is going on.
View 14 Replies View RelatedI am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
Me suman, new in the Linux world. I made a Box with AMD Phenom II X4 955 Processor, ASUS M4A78LT-M M/B (AMD 760G Chipset) and DDR3 RAM.While installing RedHat Enterprise Linux 5, after selecting the Installation media as CD-ROM I am getting the error msg "No Driver Found. Unable to find out any Drivers of the type needed for this installation."Though I had installed Fedora 8 in this box successfully.
View 1 Replies View RelatedI downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
its openSUSE 11.2 I am already running sles10sp3, windows2k3, and winxp virtual machines, but when I try to install SLES11i586 I got following error message Error No kernel was found, The installation may have failed
[Code]...
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
After install I tried to add firefox but it wasn't found in any of the repositories. I thought it was supposed to be in there. Thunderbird also wasn't. What repositories do you guys add after install?
View 3 Replies View Related