I have recently installed kubuntu 9.04 on my laptop. i then connected an ethernet cable and upgraded it to kubuntu 9.10. but i would like to connect to the internet using wireless. but i do not know how to install the windows wireless driver for my card on this OS. my card is: D-link AirPlus G DWL-g630.
View 6 RepliesAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
I've got a Atheros AR9285 wireless card. I'd like to install the driver so I can access the internet, but I cannot install it without installing the driver to access the internet. See the problem?
Fortunately, I've got a Windows partition set up that can access the internet. Hence this post. How can I go about installing the driver?
Where can I download the driver from? Where should I put it on my hard drive? What command do I use to install the driver?
Edit:
I'm on a gateway laptop. I know I can't install the drive from within windows. I'm asking which driver to download and what command installs the driver from within Linux.
Edit2:
I can't use LAN in this case.
I have Dell Wireless N-card 1520 on my Dell Studio 15 laptop. I have installed Ubuntu10.04 in it. My network card was not able to detect wireless connections. I have even installed 'Windows Wireless Driver' using ndiswrapper. I have latest driver for card. But when i click install .inf file , nothing happens or gets installed.
View 5 Replies View RelatedI downloaded my linux wireless driver (realtek 8191se), but I don't know how to install it because there is no .exe file(like windows). It has a readme file which says :
"You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User sudo su
1. Compile driver from the source code make
2. Install the driver to the kernel make install reboot"
I just upgraded ubuntu to 11.04 and I need to install the wireless driver again. I downloaded the driver and I am getting the following error when running make:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated. Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
Here's what I already installed on my laptop trying to get it fixed.
gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4)
2.6.38-8-generic
lrwxrwxrwx 1 root src 22 2011-05-01 22:16 linux -> linux-headers-2.6.38-8
drwxr-xr-x 24 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8
drwxr-xr-x 7 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8-generic
drwxr-xr-x 4 root root 4096 2011-05-01 22:10 linux-source-2.6.38
[Code].....
I have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
install a wireless card driver.
View 4 Replies View RelatedCan't install wireless network driver. The output of 'lsmod' is:
Module Size Used by
ndiswrapper 183164 0
i915 172552 2
drm 142208 3 i915
[code]....
And the output of 'sudo rmmod ssb' is:
ERROR: Module ssb does not exist in /proc/modules
Told me to fo to /var/log/jockey.logGot this I believe? what may be wrong?
2010-12-27 21:22:37,907 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2010-12-27 21:22:37,990 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx:
[code]....
I am trying to install usb wireless network card drivers on to lucid. I didnt think i was soo much a noob but it has come apparent to me now.Anyway when i use 'sudo make' i get errors that i do not understand.
View 4 Replies View RelatedIn Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
My netbook wireless card is ralink3090,it works fine in ubuntu10.10 after I upgrade to 11.04 it down.
I downloaded a driver from http://www.ralinktech.com/support.php?s=2,but I can not install it.
Code:
I am trying to install an Asus USB-N13 USB Wireless Networking stick on an Intel-chip laptop loaded with Debian squeeze release. I have built a driver (rt3070sta.ko) and the "insmod rt3070sta.ko" seems to have worked fine. I can see the driver with "ifconfig ra0" and I can set an ip address with "ifconfig ra0 inet...".HOWEVER: 1: The gnome network manager doesn't see any wireless networks to connect to.2: If I try "ifconfig ra0 up" I get "SIOCSIFFLAGS: Operation not permitted"I am doing this from a root window and my login has root privileges. I'm missing a last step - what is it?
View 2 Replies View RelatedI have installed backtrack 3 on vmware workstation. I would like to install a TP-link TL-WN650G wireless card(atheros based - AR5005GS) onBacktrack because that it supports packet injection. Backtrack doesn't automatically recognize the device so I need to install the driver, I have done some research and found I needed to install the driver 'madwifi-old'(ieee80211 version) from here..http://aircrack-ng.org/doku.php?id=madwifihttp://madwifi-project.org/However I have no idea how to install them from inside backtrack, so if someone knows please let me know.
View 1 Replies View RelatedI want to install the wireless lan driver in rhel4. I searched for the driver in internet, i got only Realtek rtl8185_linux_26.1031.1207.2009.release.tar.gz, how to install it in RHEL4.
View 1 Replies View RelatedI am using Maverick 10.10 on a Toshiba Satellite Pro L510 which has this card, full output from lshw:
[code]...
So far, I've figured out that 'Error 2' basically means any of probably a zillion or two possible errors. The line I have in bold is obviously the one. I have searched, dug, probed, but can not work out what it means or where to start fixing it. Reason I'm bothering at all is that yes, the Realtek card worked 'out of the box' but is pretty unreliable, a third and less the speed of the other machines in the house
So I am trying to install my Realtek 8191SU wireless Driver but because I am a noob I don't understand everything that they say in the read me file from where I downloaded the linux version of this driver. The Realtek 8191SU wireless driver can be foun here:
[URL]
how to instlall the driver but I don't know where driver directory is. Here is the site
[URL]
I use and acer aspire Z5751 and I have ubuntu 64-bit installed.
I am a complete novice when it comes to Linux. I have just installed Debian 5 and i would like to get the wireless adapter working. I have a Ralink RT2070 54Mbs Wireless USB Adapter and the driver disk. What are the steps/commands i must follow to install the driver please?
View 15 Replies View RelatedI have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
I don't have a wired connection to internet. I have only a wifi connection. Is there any I could download a driver and install or myself in fedora 14??
View 14 Replies View RelatedI have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:
*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model)
*) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...
i recently purchased a new custom-built computer and thought i would give ubuntu a shot (read: i'm a linux noob). i'm running 11.04. anyway, i can't get my pci wireless card to work. i downloaded the rt3562 driver from ralink's site, followed the directions in this tutorial url?t=1608095 and i keep getting an error message when i try to do "sudo make":
Code:
make -C tools
make[1]: Entering directory `/home/brock/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 2/tools'
gcc -g bin2h.c -o bin2h
code....
I have found that there are certain things on the web that I need to print, that simply refuse to work under linux. I have a samba printer server on one of my Slackware boxes and an M$ XP vm under Vbox that can access the server and see the printer. The only problem that I have is that it expects to download a driver from the server which isn't available and the HP driver installer won't install if it doesn't detect the printer. Short of relocating the printer to install the driver, does anyone know how to get the driver installed on the XP host? This is so much easier with my Slack boxes and CUPS!
View 2 Replies View RelatedIt has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedHow To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
I am dual booting with windows xp on a dell computer I recently acquired. I am running Ubuntu 10.10. The computer didn't have a wireless connection so I installed a wireless pci adapter from a company called ZONET. I installed it perfectly on windows xp, however, I cannot install the driver and the "Ralink Wireless LAN" on Ubuntu. I inserted the cd, and opened the setup.exe file with Wine Windows Program Loader (I have installed Wine 1.3 by following the instructions on http://www.winehq.org/download/deb and clicking on the link that says "click here".
I am currently temporarily connected to the internet by borrowing my main computers ethernet cable). I followed the instructions on the InstallShield Wizard only to have two windows pop up saying there is an error (see attached image).
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View Related